Canon printer imageCLASS LBP6300dn User Manual

							AB
OFF
A
This part (a plastic part 
attached to the end of 
paper) is also a packing 
material. Be sure to 
remove it.
Read this guide first.
Please read this guide before operating this product.
After you finish reading this guide, store it in a safe place for future reference.
Confirm the supplied accessories.Remove the packing materials.
Move the printer.
Connect the power cord.
Load paper.
Up to here
Check!
Did you remove all the packing materials?
The precautions to install the printer safely are described on the back side. 
Before the installation, read the precautions carefully.
*  The packing materials may be changed in form or placement, or may be added or removed without notice.
  Remove all the orange packing materials such as tape.
1
2
4
5
3
6

This guide describes how to set up the printer in the Windows environment as 
examples. To view how to use printer drivers or utilities for Macintosh, see the 
"Online Manual" (HTML manual). For handling the printer or maintenance  methods and so on, see the "e-Manual" (HTML manual).
Displaying the "Online Manual"
Double-click [index.html] in the [CAPT] - [us_eng] - [Documents] - 
[GUIDE-CAPT-US] folder in the supplied CD-ROM.
Displaying the "E-Manual"
Double-click [index.html] in the [Manuals] - [Source] folder in the supplied CD-ROM.
RT5-0738   (010)  XXXXXXXXXX  © CANON INC\f 2013 PRINTE\b IN CHINA
Quick Setup Guide 
						

							OFF
ON
100BASE-TX
10BASE-T
B
Connect the printer and computer.
USB
LAN
This manual describes only warnings and cautions for the installation and the power 
supply. Be sure to read "Important Safety Instructions" described in the e-Manual 
(HTML manual) included in the supplied CD-ROM also.
Important Safety Instructions
LBP6300 User Software
SymbolsInstallation
Indicates a warning concerning operations that may lead to 
death or injury to persons if not performed correctly. To use the 
machine safely, always pay attention to these warnings.
Indicates a caution concerning operations that may lead to injury 
to persons if not performed correctly. To use the machine safely, 
always pay attention to these cautions.
-  Do not install the printer in a location near alcohol, paint thinner, or other flammable substances. If flammable substances come into contact with 
electrical parts inside the printer, this may result in a fire or electrical 
shock.
-  Do not place the following items on the printer. -  Necklaces and other metal objects
-  Cups, vases, flowerpots, and other containers filled with water or liquids
If these items come into contact with a high-voltage area inside the 
printer, this may result in a fire or electrical shock.
If these items are dropped or spilled inside the printer, immediately turn 
OFF the power switch (1) and disconnect the interface cables if they are 
connected (2). Then, unplug the power plug from the AC power outlet (3) 
and contact your local authorized Canon dealer.
-  When installing or removing the optional accessories, be sure to turn the  printer OFF, unplug the power plug, and then disconnect all the interface 
cables and power cord from the printer. Otherwise, the power cord or 
interface cables may be damaged, resulting in a fire or electrical shock.
Power Supply
-  Do not damage or modify the power cord. Also, do not place heavy objects on the power cord or pull on or excessively bend it, as this can 
cause electrical damage, resulting in fire or electrical shock.
-  Keep the power cord away from all heat sources. Failure to do so can  cause the power cord insulation to melt, resulting in a fire or electrical 
shock.
-  The power cord should not be taut, as this may lead to a loose  connection and cause overheating, which could result in a fire.
-  The power cord may become damaged if it is stepped on, fixed with  staples, or if heavy objects are placed on it. Continued use of a 
damaged power cord can lead to an accident, such as a fire or electrical 
shock.
-  Do not plug or unplug the power plug with wet hands, as this can result  in electrical shock.
-  Do not plug the power cord into a multi-plug power strip, as this can  result in a fire or electrical shock.
-  Do not bundle up or tie up the power cord in a knot, as this can result in  a fire or electrical shock.
-  Insert the power plug completely into the AC power outlet. Failure to do  so can result in a fire or electrical shock.
-  If excessive stress is applied to the connection part of the power cord, it  may damage the power cord or the wires inside the machine may 
disconnect. This could result in a fire. Avoid the following situations:
-  Connecting and disconnecting the power cord frequently.
-  Tripping over the power cord.
-  The power cord is bent near the connection part, and continuous stress is being applied to the power outlet or the connection part.
-  Applying a shock to the power connector.
-  Do not use power cords other than the one provided, as this can result in  a fire or electrical shock.
-  As a general rule, do not use extension cords. Using an extension cord  may result in a fire or electrical shock.
-  Do not install the printer in unstable locations, such as on unsteady 
platforms or inclined floors, or in locations subject to excessive 
vibrations, as this may cause the printer to fall or tip over, resulting in 
personal injury.
-  The ventilation slots are provided for proper ventilation of working parts  inside the printer. Never place the printer on a soft surface, such as a 
bed, sofa, or rug. Blocking the slots can cause the printer to overheat, 
resulting in a fire.
-  Do not install the printer in the following locations, as this may result in a  fire or electrical shock.
- A damp or dusty location
- A location exposed to smoke and steam, such as near a cookery or humidifier
- A location exposed to rain or snow
- A location near a water faucet or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open flames
-  When installing the printer, gently lower the printer to the installation site  so as not to catch your hands between the printer and the floor or 
between the printer and other equipment, as this may result in personal 
injury.
-  When connecting the interface cable, connect it properly by following the  instructions in the e-Manual. If not connected properly, this may result in 
malfunction or electrical shock.
-  When moving the printer, follow the instructions in the e-Manual to hold it  correctly. Failure to do so may cause you to drop the printer, resulting in 
personal injury. -  Do not use a power supply voltage other than that listed herein, as this 
may result in a fire or electrical shock.
-  Always grasp the power plug when unplugging the power plug. Do not  pull on the power cord, as this may expose the core wire of the power 
cord or damage the cord insulation, causing electricity to leak, resulting 
in a fire or electrical shock.
-  Leave sufficient space around the power plug so that it can be  unplugged easily. If objects are placed around the power plug, you may 
be unable to unplug it in an emergency.
Install the driver.
Follow the instructions on the screen.
Register a paper size.
Check the operation.
Next, see the e-Manual.
Setup finished.
To avoid the risk of personal injury or damage to the printer, and for legal 
information, make sure to read the "Legal Notices" and "Important Safety 
Instructions" in the e-Manual included on the accompanying CD-ROM 
carefully before using the printer.
If you have any questions about operations, see the e-Manual.
Others
*  If you are using Macintosh, see the "Online Manual" (HTML manual).
*  If you are using Macintosh, see the "Online Manual" (HTML manual). *  You can check the operation only when using Windows.
*  If you are using Macintosh, double-click [index.html] in the [CAPT] - [us_eng] - [Documents] - [GUIDE-CAPT-US] folder in the  supplied CD-ROM.
A message prompts you to turn on the printer during the printer driver installation.
6
7
8
9
10
(1)
(1)(2)(2)
(3)