Canon printer imageCLASS D1150 User Manual

Fax (D1180/D1170/D1150) 
6-40
Adjusting the Pause Time
Adjusting the Pause Time
Some overseas dialing may be affected by the distance or complex routing of connections 
when dialing the international access code, country code, and the destination’s telephone 
number all at once. In such cases, insert a pause after the international access code. When 
the machine dials the number, it will pause where the pause was inserted in the number. 
This helps to improve the connection. The default setting is two...

Fax (D1180/D1170/D1150) 
6-41
Time Out Mode
Time Out Mode
The Time Out mode enables you to set the machine to automatically start scanning 
documents after you specify the destinations using the one-touch keys or coded dial codes, 
or by pressing 
 [Recall/Pause]/[Redial/Pause], without pressing  [Start]. If you set the 
Time Out mode to , the machine pauses for five seconds after you specify a 
destination before starting to scan.  
If you are using sequential broadcasting to send your document to more...

Fax (D1180/D1170/D1150) 
6-42
Checking the Dial Tone before Sending
Checking the Dial Tone before Sending
The following redirection problem may happen with certain kinds of fax machines on the 
market made by companies other than Canon. The DIALING LINE CHCK mode prevents this 
rare occurrence from happening. If you are sending a fax document from your machine at 
the same time another fax machine (made by a company other than Canon) is trying to send 
you a fax, your fax document may end up being...

Fax (D1180/D1170/D1150) 
6-43
Send Start Speed
Send Start Speed
This function enables you to change the send start speeds, which is useful when there is 
difficulty initiating the sending of a document. The default setting is .
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
1 0 . S Y S T E M   S E T T I N G S M E N U
If the System Manager ID and System Password 
have been set, enter the System Manager ID and 
System Password using 
  –  [numeric keys], 
then press 
 [Log In/Out].
3 
Press...

Fax (D1180/D1170/D1150) 
6-44
Receiving Fax Documents
Receiving Fax Documents
This section describes how the machine operates when it receives fax documents.
The D1180/D1170 can receive I-fax documents.
Basic Methods for Receiving Faxes
1 
When documents are being received, the 
Processing/Data indicator on the 
operation panel blinks a green light.
2 
When document reception is complete, 
the Processing/Data indicator on the 
operation panel maintains a steady green 
light. This indicates that documents...

Fax (D1180/D1170/D1150) 
6-45
Printing Received Documents on Both Sides of Paper
Printing Received Documents on Both Sides 
of Paper
You can print received documents on both sides of the paper you select. This enables you to 
save paper. The default setting is .
Make sure to close the sub-output tray before performing 2-sided printing.
Do not open the sub-output tray while performing 2-sided printing.
When performing 2-sided printing, make sure to confirm that the paper size switch lever on the rear side...

Fax (D1180/D1170/D1150) 
6-46
Reducing a Received Document
Reducing a Received Document
You can set the machine to automatically reduce received documents so that the whole 
document is printed within the printable area of the paper. The default setting is  
( and ).
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
  4 . T X / R X   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  2 . T X / R X   C O M M O N   S E T . T X / R X   S E T T I N G S
4 
Press  or  to select ,...

Fax (D1180/D1170/D1150) 
6-47
Reducing a Received Document
10
 Press  or  to select , then press [OK].
  2 . R E D U C E   R E D U C T I O N R E C E I V E   R E D U C T I O N
11
  Press  or  to select  or , then 
press [OK].
              V E R T I C A L   O N L Y R E D U C E   R E D U C T I O N
: Reduces the document 
vertically only.
: Reduces the document 
both horizontally and vertically.
12
  Press  [Stop/Reset] to return to the 
standby mode.
–
– 

Fax (D1180/D1170/D1150) 
6-48
Printing Footer Information on a Received Document
Printing Footer Information on a Received 
Document
You can set whether to insert the machine’s fax number and the sender information on 
received faxes. The default setting is .
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
  4 . T X / R X   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  2 . T X / R X   C O M M O N   S E T . T X / R X   S E T T I N G S
4 
Press  or  to select , 
then...

Fax (D1180/D1170/D1150) 
6-49
Specifying the Way of Printing When Toner Runs Out
Specifying the Way of Printing When Toner 
Runs Out
You can set if the machine stores all documents in memory or continue printing without 
storing documents in memory, when the toner runs out. The default setting is .
When the  message appears, if you set  to , you 
can continue printing. The printed documents may be light or blurred because of lack of toner. The data is erased when 
the documents are printed out, so you...