Canon printer Color imageCLASS MF9170c User Manual

Before Using the Machine
1-16
Toner Cartridge
Maintaining the Toner Cartridges
Note the following when handling toner cartridges.
Do not place the toner cartridges in fire. Toner powder is flammable.
If there is a toner powder leakage, make sure not to inhale or touch the toner powder. If it comes in contact with your skin, rinse with 
cold water using soap. If you feel an irritation on your skin or inhale the powder, consult a doctor immediately.
When removing the toner cartridges from the machine, make...

Before Using the Machine
1-17
Toner Cartridge
Checking the Toner Level
The Device Info. screen indicates one of three levels for the amount of toner remaining in the toner cartridges.
If the toner gauge indicates that the toner is empty, it is recommended that the toner cartridges be replaced. 
(See “R
eplacing the Toner Cartridges,” on p. 11-7.)
1 
Press  (Main Menu).
2 
Press the left Any key to select .
The screen below indicates there is sufficient 
toner in the toner cartridge.
The screen below...

Before Using the Machine
1-18
Checking the Device Information
Checking the Device Information
On the Device Information screen you can check the current machine status.
1 
Press  (Main Menu).
2 
Press the left Any key to select .
① Toner
The status of toner is displayed.
②

  Available Memory
The remaining amount of available system 
memory is displayed in percentage.
③

  Paper Information
The paper supply, and the paper type, 
paper size loaded in the paper drawer(s)* 
are displayed.
*

  The paper...

Before Using the Machine
1-19
Entering Characters
Entering Characters
For screens that require alphanumeric entries, follow the procedure below to enter 
characters.
Use [◀], [▶], or 
 (Scroll Wheel) to move the 
cursor position left or right.
Use [▼] and [▲] to move the cursor position up 
and down.
Press [OK] to enter the highlighted character or 
space and to determine the entry mode.
 Press [◀], [▶], [▼], [▲], or 
 (Scroll Wheel) to 
change the entry mode, then press [OK].
: Alphanumeric character...

Before Using the Machine
1-20
Telephone Line Setting
Telephone Line Setting
The machine is set to automatic detection mode. With some environments and telephone 
lines, the machine may not detect the proper telephone line type. If this happens, follow the 
procedure below to set the telephone line type. The default setting is .
Connect the telephone line cable before turning ON the machine, if you use the automatic detection mode.
1 
Press  (Main Menu).
2 
Press the right Any key to select 
.
3 
Use [▼],...

Before Using the Machine
1-21
Telephone Line Setting
6 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press 
[OK].
7 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
8 
Use [▼], [▲] or  (Scroll Wheel) to select 
the type of telephone line that is 
connected to the machine, then press 
[OK].
: Pulse dialing
: Tone dialing
Be sure to check the type of telephone line you 
are using and make the correct setting. If this 
setting is incorrect, you will not be able to 
communicate with other...

Before Using the Machine
1-22
Timer Settings
Timer Settings
Setting the Sleep Mode
When the machine remains idle for a certain period of time, it automatically enters the Sleep mode.
The default settings are  and .
1 
Press  (Main Menu).
2 
Press the right Any key to select 
.
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
4 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
6 
Use [▼], [▲] or  (Scroll Wheel)...

Before Using the Machine
1-23
Timer Settings
Setting Auto Clear Time
If the machine remains idle for a certain period of time, the display returns to the standby mode (Auto Clear 
function).
The default setting is .
If  is selected, the Auto Clear mode is not set.
After the Auto Clear mode initiates, the display returns to the screen specified in  in . For 
details, see “Setting the Function after Auto Clear Mode Initiates,” in the e-Manual.
–
–
7 
Press  (Main Menu) to return to the 
Main Menu screen....

Before Using the Machine
1-24
Timer Settings
4 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
5 
Use [▼], [▲],  (Scroll Wheel), or 
numeric keys to set the desired interval , 
then press [OK].
You can set the interval from 0 (off ) to 9 
minutes (in one-minute increments).
You can also set the interval using 
– 
(numeric keys).
6 
Press  (Main Menu) to return to the 
Main Menu screen.
–
–
Setting the Daylight Saving Time
In some countries or areas, time is advanced throughout the summer...

Before Using the Machine
1-25
Timer Settings
4 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press 
[OK].
6 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
7 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
8 
Use [▼], [▲] or  (Scroll Wheel) to select 
the month when the daylight saving time 
starts, then press [OK].
9 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
10
   Use [▼], [▲] or...