Canon printer Color imageCLASS MF9170c User Manual
Here you can view all the pages of manual Canon printer Color imageCLASS MF9170c User Manual. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 171
Copying 4-42 Erasing Shadows/Lines 1 Set originals. For details, see “Placing Originals,” on p. 2-4. 2 Press (Main Menu). 3 Use [▼], [▲] or (Scroll Wheel) to select , then press [OK]. 4 Use [▼], [▲] or (Scroll Wheel) to display , then press [OK]. 5 Use [▼], [▲] or (Scroll Wheel) to select , then press [OK]. Original Frame Erase This mode erases the dark borders and frame lines that appear around the copy if the original is smaller than the selected paper size. You can also use this mode to...
Page 172
Copying 4-43 Erasing Shadows/Lines 6 Use [▼], [▲] or (Scroll Wheel) to select the original size, then press [OK]. To switch to the A/B Sizes, press the left Any key to select . ■ If you want to set the same width for all four borders: ① Use [▼], [▲] or (Scroll Wheel) to enter a frame erase width value, then press [OK]. The default setting is . The maximum original frame erase width that you can set is . To enter values in millimeters, press the left Any key to select . When entering the...
Page 173
Copying 4-44 Erasing Shadows/Lines ③ Use [▼], [▲] or (Scroll Wheel) to enter a frame erase width value, then press [OK]. The default setting is . The maximum original frame erase width that you can set is . If you want to change the value, press (Clear) before entering the new value. If you enter a value outside the setting range, a message prompting you to enter an appropriate value appears on the screen. – – – ④ Use [▼], [▲] or (Scroll Wheel) to select , then press [OK]. The display will...
Page 174
Copying 4-45 Erasing Shadows/Lines Book Frame Erase This mode erases the dark borders and the center and contour lines that appear when you copy facing pages in a book or bound original onto a single sheet of paper. The Book Frame Erase mode cannot be used with the N on 1. You must place an original on the platen glass when using this function. – – 1 Set an original on the platen glass. For details, see “Placing Originals,” on p. 2-4. 2 Press (Main Menu). 3 Use [▼], [▲] or (Scroll Wheel) to select...
Page 175
Copying 4-46 Erasing Shadows/Lines 6 Use [▼], [▲] or (Scroll Wheel) to select the original size, then press [OK]. To switch to the A/B Sizes, press the left Any key to select . 7 Enter the each erase width value: ■ If you want to specify the erase width value for center: ① Use [▼], [▲] or (Scroll Wheel) to select , then press [OK]. To enter values in millimeters, press the left Any key to select . ② Use [▼], [▲] or (Scroll Wheel) to enter a frame erase width value, then press [OK]. The...
Page 176
Copying 4-47 Erasing Shadows/Lines ② Use [▼], [▲] or (Scroll Wheel) to enter a frame erase width value, then press [OK]. The default setting is . The maximum original frame erase width that you can set is . 8 Use [▼], [▲] or (Scroll Wheel) to select , then press [OK]. 9 Use – (numeric keys) to enter the desired copy quantity (1 to 99). 10 Press (Start). If you want to copy multiple originals using the platen glass, set an original and press (Start) once for each page. 11 Press (Main...
Page 177
Copying 4-48 Erasing Shadows/Lines 1 Set an original on the platen glass. For details, see “Placing Originals,” on p. 2-4. 2 Press (Main Menu). 3 Use [▼], [▲] or (Scroll Wheel) to select , then press [OK]. 4 Use [▼], [▲] or (Scroll Wheel) to display , then press [OK]. 5 Use [▼], [▲] or (Scroll Wheel) to select , then press [OK]. Binding Erase This mode erases the shadows that appear on copies from binding holes on originals. Do not place originals with binding holes into the feeder, as this...
Page 178
Copying 4-49 Erasing Shadows/Lines 6 Use [▼], [▲] or (Scroll Wheel) to select the original size, then press [OK]. To switch to the inch sizes, press the left Any key to select . 7 Use [▼], [▲] or (Scroll Wheel) to select the hole punch location, then press [OK]. To enter values in millimeters, press the left Any key to select . 8 Use [▼], [▲] or (Scroll Wheel) to select the frame erase width, then press [OK]. The default setting is . The maximum original frame erase width that you can set is...
Page 179
Copying 4-50 Erasing Shadows/Lines 10 Press (Start). If you want to copy multiple originals using the platen glass, set an original and press (Start) once for each page. 11 Press (Main Menu) to return to the Main Menu screen.
Page 180
Copying 4-51 Adjusting Color Balance 1 Set documents. For details, see “Placing Originals,” on p. 2-4. 2 Press (Main Menu). 3 Use [▼], [▲] or (Scroll Wheel) to select , then press [OK]. 4 Use [▼], [▲] or (Scroll Wheel) to display , then press [OK]. 5 Use [▼], [▲] or (Scroll Wheel) to select the desired color, then press [OK]. Adjusting Color Balance This mode enables you to adjust the color balance depending on the color of the originals. The adjusted color balance can be stored and named...