Canon printer Color imageCLASS MF9150c User Manual

Fax
5-60
Favorites
4 
Use [▼], [▲] or  (Scroll Wheel) to 
display , then press 
[OK].
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
the favorites you want to erase, then 
press the right Any key to select 
.
Keys registered as favorites are displayed with 
icons.
You can only erase a key with settings stored in 
the favorites. 
You can also check the settings stored in the 
favorites by pressing the left Any key to select 
. Press the right Any key to select 
 to return to the previous screen.
–
–
6 
Use...

Fax
5-61
Favorites
1 
Press  (Main Menu).
2 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
3 
Press the left Any key to select 
.
4 
Use [▼], [▲] or  (Scroll Wheel) to select 
the favorites you want to recall, then 
press [OK].
If you select favorites that already has 
specified destinations, the Send Settings 
screen appears. You can change the send 
settings or add destinations at this time.
 You can also check the settings stored in the 
favorites by pressing the left Any key to select...

Fax
5-62
Favorites
Checking Settings for Recalled Favorites
This mode enables you to check detail settings for favorites.
You can check the settings from the Select Send Type screen or from the Send Settings screen.
To use this feature, you must first register the desired document settings and destinations in favorites. (See “Registering Favorites,” on 
p
. 5-54.)
For details on how to send the documents, see “Basic M
 ethods for Sending Faxes,” on p. 5-17.
Checkng Favortes from the Select Send...

Fax
5-63
Favorites
Checkng Favortes from the Send Settngs Screen●
1 
Press  (Main Menu).
2 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
3 
Specify a destination.
For details about how to specify destinations, see 
“Specifying D estinations,” on p. 5-30.
4 
Use [▼], [▲] or  (Scroll Wheel) to 
display , then press 
[OK].
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
the favorites you want to check, then 
press the left Any key to select .
You can check detail settings....

Fax
5-64
Job Recall
Job Recall
You can recall the last three addresses, scan settings, and send settings which have been set 
in the , and then send your documents.
The settings such as destinations, scan settings and send settings are stored in a log. The actions below after you change 
settings are not recorded in a log:Pressing the 
 (Start) or  (Reset) or  (Main Menu).
Activation of the Auto Clear mode.
Turning OFF the machine.
Identical send settings are stored only once in recall memory.
If  in  in...

Fax
5-65
Job Recall
■ If you select a log in which a destination is 
stored:
The Send Settings screen appears.
①

  Confirm the settings.
■  If you select a log in which a destination is 
not stored:
The Select Send Type screen appears.
①

  Specify a destination.
For details about how to specify destinations, see 
“Specifying D estinations,” on p. 5-30.
6 
Press  (Start).
Scanning starts if the original is placed in the 
feeder, and the scanned data is sent to the 
specified destination when scanning is...

Fax
5-66
Job Recall
9 
Follow the instructions on the display, 
then press 
 (Start) once for each 
original.
10
  When scanning is complete, press the 
right Any key to select .
Scanning starts, and the scanned data is sent 
to the specified destination when scanning is 
complete.
To cancel scanning, press the left Any key to 
select  or press 
 (Stop).
–
– 

Fax
5-67
ECM Transmission
ECM Transmission
ECM (Error Correction Mode) is a mode that automatically detects and corrects fax 
transmission errors resulting from telephone line noise. ECM reduces errors when sending 
faxes in a poor telephone line condition. 
The default setting is .
To communicate using ECM, make sure this mode is activated in both the sending and receiving machines. ECM 
transmissions are possible only when this mode is activated in both machines.
Even when ECM is activated, errors can...

Fax
5-68
ECM Transmission
6 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
7 
Use [▼], [▲] or  (Scroll Wheel) to select 
 or , then press [OK].
: Does not use ECM.
: Uses ECM.
8 
Press  (Main Menu) to return to the 
Main Menu screen.
–
– 

Fax
5-69
Adjusting the Pause Time
Adjusting the Pause Time
Some overseas dialing may be affected by the distance or complex routing of connections 
when dialing the international access code, country code, and the destination’s telephone 
number all at once. In such cases, insert a pause after the international access code. When 
the machine dials the number, it will pause where the pause was inserted in the number. 
This helps to improve the connection.  
The default setting is .
 You can insert a pause...