Canon Powershot Sx600 Hs User Guide

71
Image Viewing Options
Still Images
Magnifying Images
1	 Magnify	an	image.
zzMoving the zoom lever toward  will 
zoom in and magnify the image. You can 
magnify images up to about 10x by 
continuing to hold the zoom lever.
zzTo zoom out, move the zoom lever 
toward . You can return to single-
image display by continuing to hold it.
2	 Move	the	display	position	and	switch	images	as	needed.
zzTo move the display position, press the 
 buttons.
zzWhile [] is displayed, you can switch 
to [] by pressing the...

72
Changing	Slideshow	SettingsYou can set up slideshows to repeat, and you can change the transitions 
between images and the display duration of each image.
1	 Access	the	setting	screen.
zzPress the  button, and then 
choose [Slideshow] on the [1] tab 
(=
  21).
2	 Configure	the	settings.
zzChoose a menu item to configure, and 
then choose the desired option ( =  21).
zzTo start the slideshow with your settings, 
choose [Start] and press the  
button.
zzTo return to the menu screen, press the 
 button....

73
•	Only still images shot with this camera are played back using 
Smart Shuffle.
•	 Smart Shuffle is not available in the following cases:
-
 There are less than 50 shots taken with this camera
- An unsupported image is currently displayed
- Images are shown in filtered display ( =  69)
- During group playback ( =  70)
Still ImagesMovies
Protecting Images
Protect important images to prevent accidental erasure by the camera 
(=  76).
zzPress the  button, and then choose 
[:] in the menu (=  20)....

74
Using the Menu
1	 Access	the	setting	screen.
zzPress the  button and choose 
[Protect] on the [1] tab (=  21).
2	 Choose	a	selection	method.
zzChoose a menu item and an option as 
desired (=  21).
zzTo return to the menu screen, press the 
 button.
Choosing Images Individually
1	 Choose	[Select].
zzFollowing step 2 in “Using the Menu” 
(=  74), choose [Select] and press the 
 button.
2	 Choose	an	image.
zzPress the  buttons to choose an 
image, and then press the < m> button. 
[
] is displayed.
zzTo...

75
3	 Choose	an	ending	image.
zzPress the  button to choose [Last 
image], and then press the  button.
zzPress the  buttons to choose an 
image, and then press the  button.
zzImages before the first image cannot be 
selected as the last image.
4	 Protect	the	images.
zzPress the  button to choose 
[Protect], and then press the  
button.
Specifying All Images at Once
1	 Choose	[Select	All	Images].
zzFollowing step 2 in “Using the Menu” 
(=  74), choose [Select All Images] and 
press the  button.
2	 Protect...

76
Still ImagesMovies
Erasing Images
You can choose and erase unneeded images one by one. Be careful when 
erasing images, because they cannot be recovered. However, protected 
images (=
  73) cannot be erased.
1	 Choose	an	image	to	erase.
zzPress the  buttons to choose an 
image.
2	 Erase	the	image.
zzPress the  button, and then choose 
[a] in the menu (=  20).
zzAfter [Erase?] is displayed, press the 
 buttons to choose [Erase], and 
then press the  button.
zzThe current image is now erased.
zzTo...

77
Choosing	Images	Individually1	 Choose	[Select].
zzFollowing step 2 in “Choosing a Selection 
Method” (=  76), choose [Select] and 
press the  button.
2	 Choose	an	image.
zzOnce you choose an image following 
step 2 in “Choosing Images Individually” 
(=
  74), [] is displayed.
zzTo cancel selection, press the < m> 
button again. [] is no longer displayed.
zzRepeat this process to specify other 
images.
3	 Erase	the	image.
zzPress the  button.  
A confirmation message is displayed.
zzPress the  buttons...

78
Still Images
Rotating Images
Change the orientation of images and save them as follows.
1	 Choose	[\].
zzPress the  button, and then choose 
[\] in the menu (=  20).
2	 Rotate	the	image.
zzPress the  or  button, depending 
on the desired direction. Each time you 
press the button, the image is rotated 
90°. Press the  button to complete 
the setting.
Using the Menu
1	 Choose	[Rotate].
zzPress the  button and choose 
[Rotate] on the [1] tab (=  21).
2	 Rotate	the	image.
zzPress the  buttons to choose...

79
Still ImagesMovies
Tagging Images as Favorites
You can organize images by tagging them as favorites. By choosing a 
category in filtered playback, you can restrict the following operations to all 
of those images.
•	Viewing ( =
  66), Viewing Slideshows ( =  71), Protecting Images 
(=  73), Erasing Images (=  76), Adding Images to the Print List 
(DPOF) (=  133), Adding Images to a Photobook ( =  135)
zzPress the  button, and then choose 
[] in the menu (=  20).
zz[Tagged as Favorite] is displayed....

80
Editing Still Images
•	Image editing ( =  80 – 83) is only available when the memory 
card has sufficient free space.
Still Images
Resizing Images
Save a copy of images at a lower resolution.
1	 Choose	[Resize].
zzPress the  button and choose 
[Resize] on the [1] tab (=  21).
2	 Choose	an	image.
zzPress the  buttons to choose an 
image, and then press the < m> button.
3	 Choose	an	image	size.
zzPress the  buttons to choose the 
size, and then press the  button.
zz[Save new image?] is displayed.
4...