Canon PowerShot ELPH 340 HS User Manual

							81
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Movies
Editing Movies
You can cut movies to remove unneeded portions at the beginning or end.
1 Choose [*].
zzFollowing steps 1 – 5 in “Viewing” 
(=  65), choose [*] and press the 
 button.
zzThe movie editing panel and editing bar 
are now displayed.
2 Specify portions to cut.
zzPress the  buttons to choose 
[] or [].
zzTo view the portions you can cut 
(identified by [] on the screen), press 
the  buttons to move []. Cut 
the beginning of the movie (from []) 
by choosing [], and cut the end of the 
movie by choosing [].
zzIf you move [] to a position other than a 
[] mark, in [] the portion before the 
nearest [] mark on the left will be cut, 
while in [] the portion after the nearest 
[] mark on the right will be cut.
Movie Editing Panel
Movie Editing Bar
3 Review the edited movie.
zzPress the  buttons to choose 
[], and then press the  button. 
The edited movie is now played.
zzTo edit the movie again, repeat step 2.
zzTo cancel editing, press the < o> 
buttons to choose []. Press the < m> 
button, press the  buttons to 
choose [OK], and then press the  
button again.
4 Save the edited movie.
zzPress the  buttons to choose 
[], and then press the  button.
zzPress the  buttons to 
choose [New File], and then press the 
 button.
zzThe movie is now saved as a new file.
•	 To overwrite the original movie with the cut one, choose [Overwrite] 
in step 4. In this case, the original movie will be erased.
•	 If the memory card lacks sufficient space, only [Overwrite] will be 
available.
•	 Movies may not be saved if the battery pack runs out while saving 
is in progress.
•	 When editing movies, you should use a fully charged battery pack or 
an AC adapter kit (sold separately, =
  120).
  
						

							82
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Movies
Editing Digest Movies
Individual chapters (clips) (=  28) recorded in [] mode can be erased, as 
needed. Be careful when erasing clips, because they cannot be recovered.\
1 Select the clip to erase.
zzFollow steps 1 – 2 in “Viewing Short 
Movies Created When Shooting Still 
Images (Digest Movies)” ( =
  67) to 
play a movie created in [] mode, and 
then press the  button to access the 
movie control panel.
zzPress the  buttons to choose 
[] or [], and then press the  
button.
2 Choose [].
zzPress the  buttons to choose 
[], and then press the  button.
zzThe selected clip is played back 
repeatedly.
3	 Confirm	erasure.
zzPress the  buttons to choose 
[OK], and then press the  button.
zzThe clip is erased, and the short movie is 
overwritten.
•	 [] is not displayed if you select a clip when the camera is connected to \
a 
printer.
  
						

							83
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Wi-Fi Functions
Send images wirelessly from the camera to a variety of compatible device\
s, and use the camera with Web services
What You Can Do with Wi-Fi ...........................84Uploading Images to Web Services ......................84
Sending Images to a Smartphone ......................... 85
Sending Images to a Computer ............................ 85
Printing Images Wirelessly .................................... 85
Sending Images to Another Camera ..................... 86Registering Web Services ............................... 86Registering CANON iMAGE GATEWAY ...............87
Registering Other Web Services ........................... 89Installing CameraWindow on a 
Smartphone ..................................................... 89
Preparing to Register a Computer
 .................. 90Checking Your Computer Environment .................90
Installing the Software ........................................... 91
Configuring the Computer for a Wi-Fi Connection 
(Windows Only)
 ..................................................... 91
Accessing the Wi-Fi Menu ...............................92Initial Connection via Wi-Fi .................................... 92
After the Initial Wi-Fi Connection ........................... 92Connecting via an Access Point .....................93Confirming Access Point Compatibility ..................93
Connecting to WPS-Compatible Access Points .... 94
Connecting to Access Points in the List ................ 97Connecting without an Access Point .............98Previous Access  Points ......................................... 99Connecting to Another Camera ....................100
Sending Images
 .............................................. 101Adding Comments ............................................... 102Saving Images to a Computer .......................103Using the <
{> Button
 .................................... 104Registering a Smartphone to the < {> Button .....104
Registering Image Sync to the < {> Button .........105
Clearing Registered Destinations ........................ 105Sending Images Automatically 
(Image	Sync) ................................................. 106Initial Preparations ..............................................106
Sending Images .................................................. 107Geotagging Images on the Camera ..............107
Shooting Remotely
 ........................................ 108
Editing or Erasing Wi-Fi Settings
 ................. 109Editing Connection Information ........................... 109
Returning the Wi-Fi Settings to Default ............... 11 0
  
						

							84
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Uploading Images to Web Ser vices
Images can be sent to social network services and other Web services 
via CANON iMAGE GATEWAY*. Unsent images on the camera can also 
be sent automatically to a computer or Web service via CANON iMAGE 
GATEWAY.
* CANON iMAGE GATEWAY is an online photo service available to those who have 
purchased this product.
Steps in sending images
SNS, video-sharing sites, e-mail
Access point
Camera Computer or smartphone 
browsers
CANON iMAGE GATEWAY
   Register Web services (=  86)   Connect via an access point (=  93)   Send images (=  101)*
*  You can send images to a computer or Web service.
What You Can Do with Wi-Fi
This camera is an approved Wi-Fi® product. You can wirelessly connect to 
and send images to the following devices and services.
Note that, in this chapter, wireless LAN functions other than Wi-Fi may be 
referred to as Wi-Fi.
Sending images via Wi-Fi requires some initial preparation on the camera 
and target devices. Preparations and methods of sending images vary 
depending on the destination.
Note that before using Wi-Fi (=
  92), you will need to register a camera 
nickname on the camera.
•	Before using Wi-Fi, be sure to read “Wi-Fi (Wireless LAN) 
Precautions” ( =
  159) and “Security Precautions” ( =  160).
•	Wi-Fi is a brand name that indicates interoperability certification of wireless 
LAN devices.
  
						

							85
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Sending Images to a Smar tphone
Send images to smartphones and tablet computers that have Wi-Fi 
functions. You can also shoot remotely and geotag your shots from a 
smartphone or tablet.
For convenience in this manual, smartphones, tablets, and other compatib\
le 
devices are collectively referred to as “smartphones”.
Steps in sending images
App Store/
Google Play
Smartphone
Tablet computer
Access point
CameraCameraWindow
   Install CameraWindow on a smartphone (
=  89)   Connect directly (=  98) or via an access point (=  93)   Send images (=  101)
Sending Images to a Computer
Use the software to wirelessly send images from the camera to a computer\
.
Steps in sending images
Camera
Computer
Access point Internet
CameraWindow
   Check your computer environment (
=  90)   Download and install the software (=  91)   Configure the computer for a Wi-Fi connection (Windows only, =  91)   Connect via an access point (=  93)   Save images to the computer (=  103)
Printing Images Wirelessly
Send images wirelessly to a PictBridge-compatible printer (supporting D\
PS 
over IP) to print them.
Steps in printing images
Camera
Printer
Access point
   Connect directly (=  98) or via an access point ( =  93)   Print images (=  127)
  
						

							86
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Sending Images to Another Camera
Use the Wi-Fi function to send images between Canon-brand cameras.
Steps in sending images
CameraCamera
   Connect to another camera (=  100)   Send images (=  101)
Registering Web Ser vices
Use a smartphone or computer to add to the camera Web services that you 
want to use.
•	A smartphone or computer with a browser and Internet connection is 
required to complete camera settings for CANON iMAGE GATEWAY and 
other Web services.
•	 Check the CANON iMAGE GATEWAY website for details on browser 
(Microsoft Internet Explorer, etc.) requirements, including settings and 
version information.
•	 For information on countries and regions where CANON iMAGE 
GATEWAY is available, visit the Canon website (http://www.canon.com/
cig/).
•	 You must have an account with Web services other than CANON iMAGE 
GATEWAY if you desire to use them. For further details, check the 
websites for each Web service you want to register.
•	 Separate ISP connection and access point fees may be applicable.
  
						

							87
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
4 Choose [].
zzPress the  buttons to 
choose [], and then press the  
button.
5 Establish a connection with an 
access point.
zzPress the  buttons to choose 
[Authenticate], and then press the  
button.
6 Choose an access point.
zzPress the  buttons to choose a 
network (access point), and then press 
the  button.
7 Enter the access point 
password.
zzPress the  button to access the 
keyboard, and then enter the password 
(=
  93).
zzPress the  buttons to choose 
[Next], and then press the  button.
Registering CANON iMAGE GATEWAY
After linking the camera and CANON iMAGE GATEWAY, add CANON 
iMAGE GATEWAY as a destination Web service on the camera.
1 Log in to CANON iMAGE 
GATEWAY  and access the 
camera settings page.
zzFrom a computer or smartphone, access 
http://www.canon.com/cig/ and visit the 
CANON iMAGE GATEWAY site for your 
region.
zzOnce the login screen is displayed, 
enter your user name and password 
to log in. If you do not have a CANON 
iMAGE GATEWAY account, follow 
the instructions to complete member 
registration (free of charge).
zzAccess the camera settings page.
2 Choose your camera model.
zzOn this camera model, [] is displayed 
in the Wi-Fi menu.
zzOnce you choose the model, a page is 
displayed for entering the authentication 
code. On this page in step 9, you will 
enter the authentication code displayed 
on the camera after steps 3 – 8.
3 Access the Wi-Fi menu.
zzOn the camera, access the Wi-Fi menu 
(=  92).
  
						

							88
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
8 Choose [Auto] and establish the 
connection.
zzPress the  buttons to choose 
[Auto], and then press the  button.
zzOnce the camera is connected to CANON 
iMAGE GATEWAY via the access point, 
an authentication code is displayed.
9 Enter the authentication code.
zzOn the smartphone or computer, enter 
the authentication code displayed on the 
camera and go to the next step.
zzA six-digit confirmation number is 
displayed.
10	 Check	the	confirmation	numbers and complete the 
setup process.
zzMake sure the confirmation number on 
the camera matches the number on the 
smartphone or computer.
zzPress the  buttons to choose 
[OK], and then press the  button.
zzComplete the setup process on the 
smartphone or computer.
zz[] (=  106) and CANON iMAGE 
GATEWAY are now added as 
destinations, and the [
] icon changes 
to [].
zzA message is displayed on the 
smartphone or computer to indicate that 
this process is finished. To add other 
Web services, follow the procedure in 
“Registering Other Web Services” from 
step 2 (=
  89).
•	 You can connect to WPS-compatible access points by choosing [WPS 
Connection] in step 6. For details, see steps 5 – 7 in “Connecting\
 to WPS-
Compatible Access Points” (=
  94 – 95).
  
						

							89
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Registering Other Web Ser vices
You can also add Web services besides CANON iMAGE GATEWAY to the 
camera. Note that CANON iMAGE GATEWAY must be registered on the 
camera first (=
  87).
1 Access the Web service 
settings screen.
zzFollow step 1 in “Registering CANON 
iMAGE GATEWAY” (=  87) to log in 
to CANON iMAGE GATEWAY, and then 
access the Web service settings screen.
2	 Configure	the	Web	service	you	want to use.
zzFollow the instructions displayed on the 
smartphone or computer to set up the 
Web service.
3 Choose [].
zzAccess the Wi-Fi menu (=  92), press 
the  buttons to choose 
[
], and then press the  button.
zzThe Web service settings are now 
updated.
•	 If any configured settings change, follow these steps again to update the 
camera settings.
Installing CameraWindow on a 
Smartphone
Before connecting your camera to a smartphone, first install the free 
dedicated application, CameraWindow, on your smartphone.
1 Connect the smartphone to a 
network.
2 Install CameraWindow.
zzFor an NFC-compatible Android 
smartphone (OS version 4.0 or later), 
activating NFC and touching the 
smartphone against the camera’s 
N-Mark (
) will start Google Play on the 
smartphone. Once the CameraWindow 
download page is displayed, download 
and install the app.
zzFor other Android smartphones, find 
CameraWindow in Google Play and 
download and install the app.
zzFor an iPhone, iPad, or iPod touch, find 
CameraWindow in the App Store and 
download and install the app.
zzAfter installation, use the camera 
to establish a connection with the 
smartphone ( =
  93, 98).
  
						

							90
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
•	When using NFC, keep the following points in mind.
- Avoid strong impact between the camera and smartphone. This 
may damage the devices.
-
 Depending on the smartphone, the devices may not recognize 
each other immediately. In this case, try holding the devices 
together in slightly different positions.
-
 Do not place other objects between the camera and smartphone. 
Also, note that camera or smartphone covers or similar accessories 
may block communication.
•	 For details on this application (supported smartphones and included functions), 
refer to the Canon website.
•	 Not all NFC-compatible smartphones have an N-Mark (
). For details, refer to 
the smartphone user manual.
Preparing to Register a Computer
Prepare to register a computer. To save images to the computer wirelessly, 
you must install CameraWindow.
Checking Your Computer Environment
The camera can connect via Wi-Fi to computers running the following 
operating systems. For detailed system requirements and compatibility 
information, including support in new operating systems, visit the Canon\
 
website.
Operating 
System Windows
Mac OS
Windows 8/8.1
Windows 7 SP1 Mac OS X 10.9
Mac OS X 10.8.2 or later
Mac OS X 10.7
•	
Windows 7 Starter and Home Basic editions are not supported.
•	 Windows 7 N (European version) and KN (South Korean version) 
require a separate download and installation of Windows Media 
Feature Pack.
For details, check the following website.
http://go.microsoft.com/fwlink/?LinkId=159730