Canon PowerShot A3500 IS User Manual

							141
1
2
3
4
5
6
7
8
9
Cover 
Preliminary Notes and 
Legal Information
Contents: Basic 
Operations
Advanced Guide
Camera Basics
Smart Auto 
Mode
Other Shooting 
Modes
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
FCC Notice
(Digital Camera, Model PC1953 systems)
This device complies with Part 15 of the FCC Rules. Operation is subject\
 to the 
following two conditions;
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including inter\
ference that may 
cause undesired operation.
Note:
	This	equipment	has	been	tested	and	found	to	comply	with	the	limits	for	Class	B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed 
to provide reasonable protection against harmful interference in a resid\
ential 
installation.
This
	equipment	generates,	uses	and	can	radiate	radio	frequency	energy	and,	if	not installed and used in accordance with the instructions, may cause ha\
rmful 
interference to radio communications. However, there is no guarantee that 
interference
	will	not	occur	in	a	particular	installation.	If	this	equipment	does	cause	harmful interference to radio or television reception, which can be dete\
rmined 
by	turning	the	equipment	off	and	on,	the	user	is	encouraged	to	try	to	correct	the	interference by one or more of the following measures:
•	 Reorient or relocate the receiving antenna.
•	 Increase
	the	separation	between	the	equipment	and	receiver.
•	 Connect	the	equipment	into	an	outlet	on	a	circuit	different	from	that	to	which	the	receiver is connected.
•	 Consult the dealer or an experienced radio/TV technician for help.
The cable with the ferrite core provided with the digital camera must be\
 used with this 
equipment
	in	order	to	comply	with	Class	B	limits	in	Subpart	B	of	Part	15	of	the	FCC	rules.
Do
	not	make	any	changes	or	modifications	to	the	equipment	unless	otherwise	specified	in	the	manual.	If	such	changes	or	modifications	should	be	made,	you	could	be	required	to	stop	operation	of	the	equipment.
Canon U.S.A., Inc.
One Canon Park, Melville, New York 11747, U.S.A.
Tel No. 1-800-OK-CANON (1-800-652-2666)
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
Battery Charger CB-2LF
IMPORTANT SAFETY INSTRUCTIONS-
SAVE THESE INSTRUCTIONS.
DANGER-TO REDUCE THE RISK OF 
FIRE OR ELECTRIC SHOCK, CAREFULLY 
FOLLOW THESE INSTRUCTIONS.
For connection to a supply not in the U.S.A., use an attachment plug ada\
pter of the 
proper	configuration	for	the	power	outlet,	if	needed.
Battery Charger CB-2LFE
In normal use, keep the LED side face-up.
The adapter can be used with a power supply between 100 and 240 V AC.
Contact your Canon dealer for information about plug adapter for oversea\
s use.
For U.S.A. customers only: For areas where 120 V AC power is not used, you will 
need a special plug adapter.
For only United States
Use a UL listed, 1.8-3m(6-10ft), Type SPT-2 or NTSPT-2, AWG no.18 power supply 
cord, rated for 125V 7A, with a non-polarized NEMA 1-15P plug rated for 125V 15A.
USA and Canada only:
The Lithium ion/polymer battery that powers the product is recyclable.
Please call 1-800-8-BATTERY for information on how to recycle this 
battery.

COPY  
						

							142
1
2
3
4
5
6
7
8
9
Cover 
Preliminary Notes and 
Legal Information
Contents: Basic 
Operations
Advanced Guide
Camera Basics
Smart Auto 
Mode
Other Shooting 
Modes
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Canadian Radio Interference RegulationsCAN ICES-3 (B)/NMB-3 (B)
To ensure proper operation of this product, use of genuine Canon 
accessories is recommended.
For CA, USA only
Included lithium battery contains Perchlorate Material - special handlin\
g may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.
Trademark Acknowledgments•	 The SDXC logo is a trademark of SD-3C, LLC.
•	 This device incorporates exFAT technology licensed from Microsoft.
•	 Wi-Fi
®,  Wi-Fi Alliance®, WPA™, WPA2™ and Wi-Fi Protected Setup™ 
are trademarks or registered trademarks of the Wi-Fi Alliance.
About MPEG-4 LicensingThis product is licensed under AT&T patents for the MPEG-4 standard 
and may be used for encoding MPEG-4 compliant video and/or decoding 
MPEG-4 compliant video that was encoded only (1) for a personal and 
non-commercial purpose or (2) by a video provider licensed under the AT&T 
patents to provide MPEG-4 compliant video.
No license is granted or implied for any other use for MPEG-4 standard.
Disclaimer•	 Reprinting, transmitting, or storing in a retrieval system any part of t\
his 
guide without the permission of Canon is prohibited.
•	 Canon reserves the right to change the contents of this guide at any tim\
e 
without prior notice.
•	 Illustrations and screenshots in this guide may differ slightly from the 
actual
	equipment.
•	 The above items notwithstanding, Canon accepts no liability for damages \
due to mistaken operation of the products.
FCC/IC Notice
Model: PC1953 (including WLAN Module Model WM219, FCC ID: AZD219)
The
	available	scientific	evidence	does	not	show	that	any	health	problems	are	associated with using low power wireless devices. There is no proof, however, that 
these low power wireless devices are absolutely safe. Low power Wireless\
 devices 
emit
	low	levels	of	radio	frequency	energy	(RF)	in	the	microwave	range	while	being	used. Whereas high levels of RF can produce health effects (by heating tissue), 
exposure to low-level RF that does not produce heating effects causes no known 
adverse health effects. Many studies of low-level RF exposures have not found any 
biological effects. Some studies have suggested that some biological effects might 
occur

,
	but	such	findings	have	not	been	confirmed	by	additional	research.	This	model	has been tested and found to comply with FCC/IC radiation exposure limit\
s set forth 
for	an	uncontrolled	equipment	and	meets	the	FCC	radio	frequency	(RF)	Exposure	Guidelines	in	Supplement	C	to	OET65	and	RSS-102	of	the	IC	radio	frequency	(RF)	Exposure rules.
This device complies with Part 15 of FCC Rules and Industry Canada licen\
ce-exempt 
RSS standard(s). Operation is subject to the following two conditions:\
 (1) this device 
may not cause interference, and (2) this device must accept any interf\
erence, 
including interference that may cause undesired operation of this device\
.
This transmitter must not be co-located or operated in conjunction with \
any other 
antenna or transmitter.

COPY