Canon Pixma Mp990 Quick Start Guide

Make sure to read this manual before using the machine. Please keep it i\
n hand for future reference.
Getting Started
Read Me First
Photo All-In-One
series
 

Model Number: K10345 (MP990)
S y m b o l s   U s e d   i n   T h i s   D o c u m e n t
■
Instructions as notes for operation or additional explanations. Instructions including important information. Be sure to read these indi\
cations.
Descriptions for operations that take some time to complete.
Indicates operations in Windows.
Indicates operations in Macintosh.
Macintosh, Mac, and AirPort are trademarks of Apple Inc., registered in the U.S. and other countries.
• Microsoft is a registered trademark of...


Contents
H a r d w a r e   S e t u p   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S e l e c t   C o n n e c t i o n   M e t h o d    . .
 . . . . . . . . . . . . . . . .
U S B   C o n n e c t i o n    . .
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Install the Software  ......................................................
15
15
Select Connection Method 
 ..........................................
14
14
Turn the Power On...

Preparation
Preparation
Ethernet cable
Router, etc.
Access point or 
wireless router
USB cable
C o n n e c t i o n   Ty p e s
■
A USB cable is required.
USB Connection Network Connection
Wired 
Connection
An access point or router that supports IEEE802.11b/g is 
required.A network device (router, etc.) and Ethernet cable are 
required.
Wireless 
Connection
Preparation
 


A
Preparation
Preparation
Before turning on the machine, remove all orange tape and protective she\
ets from the inside and outside of the machine.The Print Head is placed inside of the Paper Output Tray (A). 
Open the Paper Output Tray and take it out.
Print Head
power cord
Manuals•
Setup CD-ROM (containing the drivers, applications and on-screen manual\
s)
•
Warranty
•
C h e c k   t h e   I n c l u d e d   I t e m s
■
Matte Photo Paper MP-101 (for Automatic Print Head Alignment)
• (M, BK, GY,...


B
C
Preparation
Preparation
U n l o c k   t h e   S c a n n i n g   U n i t   ( C o v e r )
■
1
2
3Open the Document Cover (B).
Move the Scanner Lock Switch (C) towards the release mark to 
unlock the Scanning Unit (Cover).
Close the Document Cover.
Do not install the machine where an object may fall on it. The object may fall inside 
the machine, resulting in malfunction.
•
Do not place any object on top of the machine. It may fall into the mach\
ine when 
opening covers, resulting in...

12
A
C
B
34
D
FE
Hardware Setup
Turn the Power On
Plug the power cord into the back 
left of the machine, then connect 
the other end to the wall outlet. When the above 
screen is displayed, 
press the OK button 
and go to the next 
step.
Do NOT connect the USB cable or 
Ethernet cable at this stage.
•
The machine may make some operating 
noises. This is normal operation.
•
Make sure that the Document Cover 
(A) is closed.
•
Open the Operation Unit (B) and 
press the ON button (C) to turn on the...

1
A
CB
C
D
2
Hardware Setup
Install the Print Head
Open the Paper Output Tray (A), then lift the Scanning Unit (Cover) (B) 
until it stops.
Handle the Print Head carefully. Do not 
drop or apply excessive pressure to it.
•
The Print Head Holder makes a noise as it moves. This is normal operation.
•
Close the Document Cover (C) and lift it with the Scanning Unit (Cove\
r).
If the Print Head Holder does not move, make sure that the machine is tu\
rned on.
•
Make sure that the Print Head Holder 
(D)...


345
E
F
G
H
Hardware Setup
Install the Print Head
Remove the Print Head from the 
silver package.
There may be some transparent or light blue ink on the inside of the bag\
 the Print Head 
comes in, or the inside of the protective cap - this has no effect on print quality. Be careful not 
to get ink on yourself when handling these items.
•
Remove the orange protective cap.
Firmly raise the Print Head Lock Lever (E) of the Print Head Holder un\
til it 
stops.
Do not touch the inside of the Print...


67
Hardware Setup
Install the Print Head
Tilt the Print Head forward and set it in place as shown.Lower the Print Head Lock Lever 
completely.
Do not knock the Print Head against the sides of the holder.
•
Install in a well-lit environment.
• Hold the Print Head Lock Lever firmly and 
lower it gently.
•
Once you have installed the Print Head, do 
not remove it unnecessarily.
•