Canon Pixma Mp630 User Guide

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods >
Booklet Printing 
Booklet Printing 
The booklet printing function allows you to print data for a booklet. Data is printed on both sides of the
paper. This type of printing ensures that pages can be collated properly, in page number order, when the
printed sheets are folded and stapled at the center. 
The procedure for performing booklet printing is as follows: 
1.Open the printer driver setup...

Insert blank page 
To leave one side of a sheet blank, check Insert blank page check box, and select the page to be left
blank. 
Margin 
Enter the margin width. The specified width from the center of the sheet becomes the margin for one
page. 
Page Border 
To print a page border around each document page, check the Page Border check box. 
5.Complete the setup 
Click OK on the Page Setup tab. 
When you execute print, the document is automatically printed first on one side of a sheet of paper
and then on...

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods >
Duplex Printing 
Duplex Printing 
The procedure for printing data on both sides of a sheet of paper is as follows: 
Performing automatic duplex printing 
You can perform the duplex printing without having to turn over the paper. 
1.Open the printer driver setup window
2.Set automatic duplex printing 
Check the Duplex Printing check box and confirm that Automatic is checked on the Page Setup...

Use normal-size printing 
Print without reducing the page. 
Use reduced printing 
Reduce the page slightly during printing. 
5.Specify the side to be stapled 
The printer analyzes the Orientation and Page Layout settings, and automatically selects the best
Staple Side. If you want to change the setting, select another value from the list. 
6.Set the margin width 
If necessary, click Specify Margin... and set the width of the stapling margin, and then click OK. 
7.Complete the setup 
Click OK on the Page...

printing of one side is complete, set the paper correctly by following the message and click OK. The
document will be printed on the opposite side. 
Important 
Duplex Printing is unavailable when: 
A media type other than Plain Paper or Hagaki is selected from the Media Type list. 
Poster Printing is selected from the Page Layout list. 
When Booklet Printing is selected from the Page Layout list, Duplex Printing and Staple Side
appear grayed out and are unavailable. 
After printing the front page, there...

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods >
Stamp/Background Printing 
Stamp/Background Printing 
This feature is unavailable when the 64-bit printer driver is used. 
The Stamp function allows you to print a stamp text or a bitmap over or behind document data. The
Background function allows you to print a light illustration behind the document data. 
The procedure for performing stamp/background printing is as follows: 
Printing a...

Note 
The stamp is given priority because the stamp is printed over the document data in the
sections where the stamp and the document data overlap. If the Place stamp over text check
box is unchecked, the stamp is printed behind the document data and may be hidden in the
overlapping sections depending on the application used. 
Stamp first page only 
To print the stamp only on the first page, check this check box. 
Define Stamp... button 
To change the stamp text, bitmap, or position, click this (refer...

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > 
Stamp/Background Printing > Saving a Stamp Setting 
Saving a Stamp Setting 
This feature is unavailable when the 64-bit printer driver is used. 
You can create and save a new stamp. You can also change and register some of the settings of an
existing stamp. Unnecessary stamps can be deleted at any time. 
The procedure for registering a new stamp is as follows: 
Registering a new stamp...

4.Configure the stamp while viewing the preview window 
Stamp tab 
Select Text or Bitmap with Stamp Type.
When registering a text, the characters must already be entered in Stamp Text. Change the True
Type Font, Style, Size, and Outline settings, as necessary. You can select the color of the stamp
by clicking Select Color....
For Bitmap, click Select File... and select the bitmap file (.bmp) to be used. Change the settings
of the Size and Transparent white area if necessary. 
Placement tab 
Select the...

Click OK. The Stamp/Background dialog box opens again.
The registered title appears in the Stamp list. 
Deleting an unnecessary stamp 
1.Click Define Stamp... in the Stamp/Background dialog box 
The Stamp Settings dialog box opens. 
2.Select the stamp to be deleted 
Select the title of the stamp you want to delete from the Stamps list on the Save settings tab. Then
click Delete.
Click OK when the confirmation message appears. 
3.Complete the setup 
Click OK. The Stamp/Background dialog box opens again....