Canon Pixma Mg2924 User Guide

Note•
You can set the machine to automatically turn off when no operations are performed or no print
jobs are sent to the machine for a certain interval. This is the default setting. For details on the
auto power off feature, see below.
From the machine
Turning on/off the Machine Automatically
From the computer
Managing the Printer Power
101
 

Notice for the Power Plug/Power CordUnplug the power cord once a month to confirm that the power plug/power cord does not have anythingunusual described below.•
The power plug/power cord is hot.
•
The power plug/power cord is rusty.
•
The power plug/power cord is bent.
•
The power plug/power cord is worn.
•
The power plug/power cord is split.
Caution
•
If you find anything unusual with the power plug/power cord described above, unplug the power cord
and call for service. Using the machine with one of the...

Notice for Unplugging the Power CordTo unplug the power cord, follow the procedure below.
Important
•
When you unplug the power cord, press the  ON button, then confirm that the  ON lamp is off.
Unplugging the power cord while the  ON lamp is lit or flashing may cause drying or clogging of the print
head and print quality may be reduced.
1.
Press the  ON button to turn the machine off.
2.
Confirm that the  ON lamp is off.
3.
Unplug the power cord.
The specification of the power cord differs depending on...

Loading Paper / Originals
Loading Paper
Loading Originals
104
 

Loading Paper
Loading Plain Paper / Photo Paper
Loading Envelopes
Media Types You Can Use
Media Types You Cannot Use
Printing Area
105
 

Loading Plain Paper / Photo PaperYou can load plain paper or photo paper.
Important
•
If you cut plain paper into small size such as 4" x 6" (10 x 15 cm) or 5" x 7" (13 x 18 cm) to perform trial
print, it can cause paper jams.
Note
•
We recommend Canon genuine photo paper for printing photos.
For details on the Canon genuine paper, see 
Media Types You Can Use .
•
You can use general copy paper.
For the page size and paper weight you can use for this machine, see 
Media Types You Can Use...

3.
Slide the paper guide (A) to the left, and load the paper against the far right of the rear tray
WITH THE PRINT SIDE FACING YOU.
4.
Slide the paper guide (A) to align it with the paper stack.
Do not slide the paper guide too hard against the paper. The paper may not be fed properly.
Important
•
Always load paper in the portrait orientation (B). Loading paper in the landscape orientation (C) can cause paper jams.
Note
•
Do not load sheets of paper higher than the load limit mark (D).
107
 

Note
•
The machine may make operating noise when feeding paper.
•
After loading paper, select the size and type of the loaded paper on the print settings screen of theprinter driver.
108
 

Loading EnvelopesYou can load Envelope DL and Envelope Com 10.
The address is automatically rotated and printed according to the envelope's direction by specifying with the printer driver properly.
Important
•
Printing of envelopes from a digital camera is not supported.
•
Do not use the following envelopes. They could jam in the machine or cause the machine to malfunction.
•
Envelopes with an embossed or treated surface
•
Envelopes with a double flap
•
Envelopes whose gummed flaps are already...

3.
Slide the paper guide (A) to the left, and load the envelopes against the far right of the rear
tray WITH THE PRINT SIDE FACING YOU.
The folded flap of the envelope will be faced up on the left side.
Up to 5 envelopes can be loaded at once.
4.
Slide the paper guide (A) to align it with the envelopes.
Do not slide the paper guide too hard against the envelopes. The envelopes may not be fed properly.
(B) Rear side
(C) Address side
110