Canon Pixma Ip90 Quick Start Guide

Basic Printing17
(2)Connect the printer to your computer with a USB cable.
(3) Open the Paper Support, turn on the printer, and then turn on the computer.
2Start the Canon iP90 Setup Utility.
3Specify the paper size and layout.
„Changing the Photo Print Settings
(1) Click  Infrared/Bluetooth connection Print Settings  tab.
(2) Click  Change  on Photo Print Settings .
The  Photo Printing  dialog box appears.
Windows
Click  Start and select  All Programs  (or 
Programs ), Canon Utilities , Canon iP90...

Basic Printing
18
(3)Select a desired layout for printing.
(4) Click  Send.
You can perform printing from a PDA or  mobile phone with the specified media 
type and layout.
For details about printing from PDA or mobile phone, refer to the section 
 Performing Infrared Communication  on page 21.
4×6 
(Standard)
Prints a photo on Photo Paper Pl
us Glossy 4×6/101.6×152.4 mm 
paper without a border.
5×7
Borderless Prints a photo on Photo Paper Pl
us Glossy 5×7/127.0×177.8 mm 
paper without a border.
Credit...

Basic Printing19
„Changing the Document Print Settings
(1) Click  Infrared/Bluetooth connection Print Settings  tab.
(2)
Click Change on Document Print Settings.
The  Document Printing  dialog box appears.
(3) Select the printing type for the document.
(4) Click  Send.
You can perform printing from a PDA or  mobile phone with the specified media 
type and layout.
For details about printing from PDA or mobile phone, refer to the section 
 Performing Infrared Communication  on page 21.
Note
Bible, Mini...

Basic Printing
20
NoteFollowing limitations apply on transmittable data
• It does not support printing a downloaded content or photo and a photo 
attached to an email for security reason.
• It does not support printing video files.
• Depending on your device, the Fine print quality option may not be available  due to the restriction on the infrared transfer capacity.
• Depending on your device, it may not  print data stored in a memory card.
• It automatically sets the image quality and orientation...

Basic Printing21
„Performing Infrared Communication
When performing infrared communication, al so refer to your computer, mobile phone 
or PDA manual.
1Set up the Printer.
(1) Ensure that the Universal AC Adapter is connected securely. 
When using the optional battery, ensure that it has been charged.
(2) Open the Paper Support and turn on the printer.
(3) Load the paper on the Paper Support.
2Start Infrared Communication.
(1)Align the Infrared Port of the computer to  that of the printer at a distance...

Basic Printing
22
Note• By pressing the RESUME/CANCEL button, you can print the same 
image data transmitted from the mobile phone right before.
• Do not place any obstacle between the Infrared Ports of the printer  and PDA, mobile phone or computer. Data cannot be transmitted 
between them. Check the orientatio n and positions of the Infrared 
Ports of the printer, mobile phone and PDA or computer. Oppose 
these ports properly as mentioned above.
• During printing, be careful not to interrupt infrared...

Advanced Printing23
Advanced Printing
Printing Photographs Directly from a PictBridge 
Compliant Device
Connecting a PictBridge compliant device such as a digital camera, 
camcorder or mobile phone to the printer allows you to print recorded images 
directly without using a computer.Note • PictBridge is an Industry standard enabling a range of digital photo 
solutions, including the direct printing  of photos from a digital still camera, 
camcorder or mobile phone* without the need to use a computer.
•...

Advanced Printing
24
„Connecting to a PictBridge Compliant Device
To connect a PictBridge compliant device to this printer, use the USB cable supplied 
with the device.
1Set up the printer
Ensure that the Universal AC Adapter is connected securely.
If you do use a battery pack, ensure that it is fully charged.
2Open the Paper Support and turn on the printer.
Caution Do not connect any equipment other th an PictBridge compliant devices or 
Canon Bubble Jet Direct Compatible Digital Camera to the Direct...

Advanced Printing25
3Load 4×6 paper into the Auto Sheet Fe eder in the portrait position (short 
side facing down).
4Connect the PictBridge compliant device to the printer.
(1) Ensure that the device is turned off.
Note Some types of the device turn on automatically, when connected to the 
printer. For a device not turns on automatically, turn it on manually.
(1) When loading Canon Speciality Media, 
load them with the glossy side facing 
up.
(2) Align the paper against the right side of the Auto Sheet...

Advanced Printing
26
(3)Turn on and set up the device for direct printing.
When the connection between the device and printer has been established, the 
POWER lamp on the printer flashes once.
Either of the following icons will display on the LCD display of the device when 
the printer is correctly connected. 
A PictBridge compatible device
A Canon Bubble Jet Direct compatible device
„Printing Photographs Directly fr om a PictBridge Compliant Device
When operating the device, be sure to follow the...