Canon Pixma Ip4850 User Guide

3.Select the printer driver to be deleted 
If you are using W indows 7, click any icon in Printers and Faxes.
On the commandbar, click Print server properties, and th en click the Drivers tab. If the Change
Driver Settings button is displayed, click that button. 
W hen the User Account Control dialog box appears, c lick Yes.
In the Installed printer drivers list, click the printer  to delete. 
If you are using W indows Vista, press the Alt key. On th e File menu, select Run as administrator,
and then...

Advanced Guide > Appendix > Updating the Printer Drivers > Before Installing the Printer Driver 
P040 
Before Installing the Printer Driver 
This section describes the items that you should ch eck before installing the printer driver. You should
also refer to this section if the printer driver ca nnot be installed. 
Checking the Printer Status 
Properly connect the personal computer and the prin ter. For details on connection instructions, refer
to the Install the Software in the manual: Getting...

Advanced Guide > Appendix > Updating the Printer Drivers > Installing the Printer Driver 
P041 
Installing the Printer Driver 
You can access our web site through the Internet an d download the latest printer driver for your model. 
The procedure for installing the downloaded printer  driver is as follows: 
1.Turn off the printer 
2.Start the installer  
Double-click the icon of the downloaded file. 
The installation program starts. 
Important 
In W indows 7 or W indows Vista, a confirmation/warni ng...

Page top
Page 454 of 468 pages
Installing the Printer Driver
.ownloadedtfromtManualsPrinterDcomtManuals 

Advanced Guide > Appendix > Uninstalling the On-Screen Manuals
U509
Uninstalling the On-Screen Manuals
Follow the procedure below to uninstall all of the  installed on-screen manuals from your computer.
Before uninstalling the on-screen manuals, exit all  on-screen manuals that are opening.
1.Click Start > All Programs > Canon XXX Manual (wher e 
XXX  is your printers
name) > Uninstall.
2.Click OK when the confirmation message appears.
Note
W hen the message prompting you to restart your computer  is...

Advanced Guide > Appendix > Transporting the Printer
U510
Transporting the Printer
W hen relocating the printer, pack the printer using the original packing materials.
If you do not have the original packing materials, pa ck the printer carefully using protective material and
place it inside a sturdy box.
Important
Do not transport or store the printer slanted, vert ically, or upside-down, as the ink may leak and
damage the printer.
1.Turn the printer off.
2.Confirm that the  POWER lamp is off and unplug...

Advanced Guide > Appendix > Opening the Printer Driver Setup W indow
U511
Opening the Printer Driver Setup Window
The printer driver setup window can be displayed through the application software in use or the Start
menu of the W indows.
Open the Printer Driver Setup Window through the Ap plication Software
Follow the procedure below to configure print settings when printing.
1.Select the command you perform printing on the appl ication software in use.
In general, select Print on the File menu to open t...

Advanced Guide > Appendix > Notice for Unplugging the Power Cord
U516
Notice for Unplugging the Power Cord
To unplug the power cord, follow the procedure below.
Important
W hen you unplug the power cord, press the ON
 button, then confirm that the  POWER lamp is off.
Unplugging the power cord while the printer is stil l on may cause drying or clogging of the Print
Head and print quality may be reduced.
1.Press the  ON button to turn the printer off.
2.Confirm that the 
POWER lamp is off.
3.Unplug the...

Advanced Guide > Appendix > Sharing the Printer on a Network 
P042 
Sharing the Printer on a Network 
W hen multiple computers are being used in the netwo rk environment, you can share the printer
connected to one computer with the other computers. 
The W indows versions of the computers connected to  the network do not necessarily have to be the
same. 
Settings on Print Server
The procedure for setting up a computer directly co nnected to a printer with a USB cable is as
follows: 
Settings on Client PC...

Advanced Guide > Appendix > Sharing the Printer on a Network > Settings on Print Server 
P043 
Settings on Print Server 
W hen you use the printer on a network, set up the pri nter driver for sharing on the server system. 
The procedure for setting up the print server syste ms is as follows: 
1.Install the printer driver on the print server syst em 
For details on installation instructions, refer to  the Install the Software in the manual: Getting
Started. 
2.Select items from the Start menu as shown...