Canon Pixma Ip4850 User Guide

5.Specify the print settings such as the paper type and layout.
You can perform settings using the menu on the LCD  of your PictBridge compliant device. Select the
size and type of paper that you loaded in the printe r.
Settings on a PictBridge Compliant Device
6.
Start printing from your PictBridge compliant devic e.
Important
Never disconnect the USB cable during printing unless when explicitly allowed to by the
PictBridge compliant device. W hen disconnecting the  USB cable between the PictBridge...

Advanced Guide > Printing Photographs Directly from a Compliant Device > Printing Photographs Directly from aPictBridge Compliant Device > About PictBridge Print Settings
U053
About PictBridge Print Settings
Settings on a PictBridge Compliant Device
This section describes the PictBridge function of t he printer. For the print settings on a PictBridge
compliant device, refer to the instructions given i n the devices instruction manual.
Note
In the following description, names of setting item s are given...

(May not be selected depending on the device.)
TrimmingDefault (Off: No trimming), On (follow the cameras setting), Off
Page top
Page 353 of 468 pages
About PictBridge Print Settings
.ownloadedtfromtManualsPrinterDcomtManuals 

Advanced Guide > Maintenance 
Maintenance 
Cleaning Your Printer
Performing Maintenance from a Computer
Page top
Page 354 of 468 pages
Maintenance
.ownloadedtfromtManualsPrinterDcomtManuals  

Advanced Guide > Maintenance > Cleaning Your Printer 
Cleaning Your Printer 
Cleaning
Cleaning the Exterior of the Printer
Cleaning the Protrusions inside the Printer
Page top
Page 355 of 468 pages
Cleaning Your Printer
.ownloadedtfromtManualsPrinterDcomtManuals  

Advanced Guide > Maintenance > Cleaning Your Printer > Cleaning
U059
Cleaning
This section describes the cleaning procedure that  is needed to maintain your printer.
Important
Do not use tissue paper, paper towels, rough-textur ed cloth, or similar materials for cleaning so as
not to scratch the surface. Paper tissue powder or  fine threads may remain inside the printer and
cause problems such as print head blockage and poor  printing results. Be sure to use a soft cloth.
Never use volatile liquids such...

Advanced Guide > Maintenance > Cleaning Your Printer > Cleaning the Exterior of the Printer
U060
Cleaning the Exterior of the Printer
Be sure to use a soft cloth such as eyeglasses cleaning cloth and wipe off dirt on the surface gently.
Smooth out wrinkles on the cloth if necessary befor e cleaning.
Important
Be sure to turn off the power and disconnect the po wer plug before cleaning the printer.
Do not use tissue paper, paper towels, rough-textured cloth, or similar materials, as this may
scratch the...

Advanced Guide > Maintenance > Cleaning Your Printer > Cleaning the Protrusions inside the Printer
U063
Cleaning the Protrusions inside the Printer
If protrusions inside the printer are stained, wipe off any ink from the protrusions using a cotton sw ab or
the like.
Important
Be sure to turn off the power and disconnect the po wer plug before cleaning the printer.
Page top
Page 358 of 468 pages
Cleaning the Protrusions inside the Printer
.ownloadedtfromtManualsPrinterDcomtManuals   

Advanced Guide > Maintenance > Performing Maintenance from a Computer 
Performing Maintenance from a Computer 
Cleaning the Print Heads
Cleaning the Paper Feed Rollers
Aligning the Print Head Position
Manual Print Head Alignment
Checking the Print Head Nozzles
Cleaning Inside the Printer
Page top
Page 359 of 468 pages
Performing Maintenance from a Computer
.ownloadedtfromtManualsPrinterDcomtManuals  

Advanced Guide > Maintenance > Performing Maintenance from a Computer > Cleaning the Print Heads 
P026 
Cleaning the Print Heads 
The print head cleaning function allows you to unclog clogged nozzles in the print head. Perform print
head cleaning if printing is faint or a specific co lor fails to print, even though there is enough ink . 
The procedure for cleaning the print heads is as fo llows: 
 Cleaning 
1.Open the printer driver setup window
2.
Click Cleaning on the Maintenance tab  
The Print Head...