Canon Pixma Ip4500 Quick Start Guide

							87
Appendix
Specifications
General Specifications
Printing resolution (dpi) 9600 (horizontal)* x 2400 (vertical)
* Ink droplets can be placed with a pitch of 1/9600 inch at minimum.
Interface USB 2.0 High Speed*
* A computer that complies with USB 2.0 Hi-Speed standard is required. Since the 
USB 2.0 Hi-Speed interface is fully upwardly compatible with USB Full-Speed 
(USB 1.1), it can be used at USB Full-Speed (USB 1.1).
Print width 8.0 inches / 203.2 mm max.
(for Borderless Printing: 8.5 inches / 216 mm)
Acoustic noise level Approx. 34.5 dB (A) (when printing in the highest print quality mode on Photo Paper 
Pro)
Operating environment Temperature: 5 to 35°C (41 to 95°F)
Humidity: 10 to 90% RH (no condensation)
Storage environment Temperature: 0 to 40°C (32 to 104°F)
Humidity: 5 to 95% RH (no condensation)
Power supply AC 100-240 V, 50/60 Hz
Power consumption Printing: Approx. 13 W
Standby: Approx. 1.2 W
OFF: Approx. 1.0 W
External dimensions Approx. 17.5 (W) x 11.9 (D) x 6.3 (H) inches /
Approx. 445 (W) x 303 (D) x 160 (H) mm
* With the Paper Support and Paper Output Tray retracted.
Weight Approx. 6.9 kg (Approx. 15.2 lb.)
* With the Print Head and Ink Tanks installed.
Print Head Total 4,608 nozzles (Y/DyeBK/PgBK: each 512 nozzles, C/M: each 1536 nozzles)
Camera Direct Print (PictBridge) 
Paper size4 x 6 / 101.6 x 152.4 mm, 5 x 7 / 127.0 x 177.8 mm*1, Credit card*2, 
8 x 10 / 203.2 x 254.0 mm, A4, Letter, Wide*1
*1 Can be selected only on certain Canon-brand PictBridge compliant devices.
*2 Feeding this paper from the Cassette can damage the printer. Load in the Rear  Tray.
Paper type Default (Photo Paper Plus Glossy), Photo (Photo Paper Plus Glossy, Glossy Photo 
Paper, Glossy Photo Paper “Everyday use”, Photo Paper Glossy, Photo Paper Plus 
Semi-gloss, Photo Stickers), Fast Photo (Photo Paper Pro), Plain Paper (A4/Letter 
only)
Layout Default (Borderless), Borderless, Bordered, N-up (2, 4, 9, 16)
*1, 35-up*2
*1 Layout compatible with Canon-brand sticker above. See “Recommended Paper 
and Requirements” on page 5.
*2 Selected photos are printed in 35 mm film style layout (contact printing layout).  This print setting is only available with certain Canon PictBridge compliant 
devices.
Image optimize Default (Exif Print), On, Off, VIVID*, NR (Noise Reduction)*, Face*, Red eye*
* If using a Canon PictBridge compliant device, you can select it.
Print date & file no. Default (Off: No printing), Date, File No., Both, Off
Trimming Default (Off: No trimming), On (follow camera’s setting), Off
 
						

							88Appendix
zTo upgrade from Windows XP to Windows Vista,  first uninstall software bundled with the Canon 
inkjet printer. 
Minimum System Requirements
Note
Conform to the operating system’s requirements when higher than those given here. 
Operating System
Processor
RAM Windows Vista
Pentium II (including compatible processors)
300 MHz
128 MB
Windows XP SP1, SP2
Pentium II (including compatible processors)
300 MHz
128 MB
Windows 2000 Professional SP2, SP3, SP4
Pentium II (including compatible processors)
300 MHz
128 MB
NoteOperation can only be guaranteed on a PC 
pre-installed Windows Vista, XP or 2000. Mac OS X v.10.4
Intel processor
PowerPC G3
256 MB
Mac OS X v.10.2.8 - v.10.3
PowerPC G3
128 MB
NoteHard disk must be formatted as Mac OS 
Extended (Journaled) or Mac OS Extended.
Browser Internet Explorer 6.0- Safari
Hard Disk Space 400 MB
NoteFor bundled software installation. 200 MBNoteFor bundled software installation.
CD-ROM Drive Required
Other restrictions SVGA 800 x 600
Additional System Requirements for On-Screen Manuals
Browser: Windows HTML Help Viewer
Note: Microsoft Internet Explorer 5.0 or later must be 
installed. The on-screen manual may not be displayed 
properly depending on your operating system or Internet 
Explorer version. We recommend that you keep your 
system up to date with Windows Update. Browser: Help Viewer
Note: The on-screen manual may not be displayed properly 
depending on your operating system or Help Viewer 
version. We recommend that you keep your system up to 
date with Software Update.
 
						

							89
Safety Precautions
Safety Precautions
Please read the safety warnings and cautions prov ided in this manual to ensure that you use the 
printer safely. Do not attempt to use the printer in any way not described in this manual.
Warning
z This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities, 
please move away from this product and consult your doctor.
z You may cause an electric shock, fire, or damage the printer if you ignore any of these safety 
precautions.
Choosing a location Do not place the printer close to flammable solvents such as alcohol or thinners.
Power supply Never attempt to plug in  or unplug the printer from the power supply when your hands are 
wet.
Always push the plug all the way into the power outlet.
Never damage, modify, stretch or excessively bend or twist 
the power cord. Do not place heavy objects on the power 
cord.
Never plug the printer into a power socket that is shared 
with other equipment (extension lead/cord, 2- or 3-way 
adapter, etc.).
Never use the printer if the power cord is bundled or knotted.
If you detect smoke, unusual smells or strange noises around the printer, immediately unplug the 
printer at the power supply and call for service.
Periodically, unplug the printer and use a dry cloth to wipe off 
any dust or dirt collected on the plug and the power outlet. If 
the printer is placed at a location exposed to a lot of dust, 
smoke, or high humidity, the dust collected on the plug 
absorbs moisture and may cause insulation failure and fire.
If you hear thunder, disconnect the power supply of the printer and refrain from using it. Leaving 
the printer plugged in may cause fire, electric shock, or damage to the printer, depending on the 
thunder storm.
Use the power cable included with the printer.
 
						

							90Safety Precautions
Cleaning the printer Use a damp cloth to clean the printer. Never use flammable 
solvents such as alcohol, benzene or thinners.
If flammable solvents come in contact with electrical 
components inside the printer, it could cause a fire or electric 
shock.
Always unplug the printer from the power outlet before cleaning the printer.
If you accidentally switch the printer on while cleaning it, you could injure yourself or damage the 
printer.
Maintaining the 
printer Do not attempt to disassemble or modify the printer. There are no user serviceable parts inside the 
printer.
The printer contains high-voltage components. Never attempt any maintenance procedure not 
described in this guide.
Working around the 
printer Do not use highly flammable sprays near the printer.
This could cause a fire or electric shock if the spray comes into contact with electrical components 
inside the printer.
Caution
You may cause injury or damage the printer if you ignore any of these safety precautions.
Choosing a location
Do not install the printer in a location that is unstable or subject to excessive vibration.
Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or 
close to a heating source.
To avoid the risk of fire or electric shocks, install the printer in a location with an ambient 
temperature range of 5°C to 35°C (41°F to 95°F) and humidity of 10% to 90% (condensation free).
Do not place the printer on a thick rug or carpet.
Do not place the printer with its back attached to the wall.
Power supply Ensure that the area around the power outlet is kept clear at 
all times so you can easily unplug the power cord if 
necessary.
Never remove the plug by pulling on the cord.
Do not use an extension lead/cord.
 
						

							91
Safety Precautions
Working around the 
printer Never put your hands or fingers in the printer while it is printing.
Do not place any object on the printer.
Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents (alcohol, 
thinners, etc.) on top of the printer.
If any foreign object (metal or liquid) fall into the printer, unplug the power cord and call for service.
Do not transport or store the printer on a slant, vertically or upside-down, as the ink may leak and 
damage the printer.
Print Heads and ink 
tanks For safety reasons, store Print Heads and ink tanks out of the reach of small children.
If a child ingests any ink, consult a doctor immediately.
Do not shake Print Heads or ink tanks.
Ink may leak out and stain clothing or the surrounding area.
Never touch the electrical contacts on a Print Head after 
printing. The metal parts may be very hot and could cause 
burns.
Do not throw ink tanks into fire.
 
						

							92
Users in the U.S.A. 
„Regulatory Information
FCC Notice (U.S.A. Only)
For 120V, 60Hz model
Model Number: K10305
This device complies with Part 15 of the FCC Ru les. Operation is subject to the following two 
conditions: (1) This device may not cause harmful in terference, and (2) this device must accept any 
interference received, including interf erence that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable 
protection against harmful interference in a resid ential installation. This equipment generates, uses 
and can radiate radio frequency energy and, if  not installed and used in accordance with the 
instructions, may cause harmful inte rference to radio communications.
However, there is no guarantee that interference will  not occur in a particular installation. If this 
equipment does cause harmful interference to ra dio or television reception, which can be 
determined by turning the equipment off and on, t he user is encouraged to try to correct the 
interference by one or more of the following measures:
z Reorient or relocate the receiving antenna.
z Increase the separation between the equipment and receiver.
z Connect the equipment into an outlet on a circuit di fferent from that to which the receiver is 
connected.
z Consult the dealer or an experienc ed radio/TV technician for help.
Use of a shielded cable is required to  comply with Class B limits in Subpart B of Part 15 of the FCC 
Rules.
Do not make any changes or modifications to  the equipment unless otherwise specified in the 
manual. If such changes or modifica tions should be made, you could be required to stop operation of 
the equipment.
Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042
1-516-328-5600
„ Canon U.S.A., INC. LIMITED WARRANTY  --- (USA Only)
The limited warranty set forth below is given by  Canon U.S.A., Inc. (“Canon USA”) with respect to 
the new or refurbished Canon-brand product (“Produc t”) packaged with this limited warranty, when 
purchased and used in the United States only.
The Product is warranted against defects in  materials and workmanship under normal use and 
service (a) for a period of one (1) year from the dat e of original purchase when delivered to you in 
new condition in its original container or (b) fo r 90 days from the date of original purchase for 
refurbished Products. Product returned to a Canon U SA repair facility or a Canon USA Authorized 
Service Facility (“ASF”), and proven to be defecti ve upon inspection will be (a) repaired utilizing new, 
remanufactured, repaired and/or recycled parts (b) exchanged for new or; (c) exchanged for a 
refurbished Product, as determined by the Canon USA repair facility or the ASF. Warranty repair or 
replacement shall not extend the original warrant y period of the Product. A dated proof of purchase 
is required at the time of warranty service. A copy  of your dated bill of sale will satisfy this 
requirement. This warranty does not cover any access ories, or any consumables, such as paper or 
ink cartridges, as to which there  shall be no warranty or replacement.
 
						

							93
This limited warranty shall only apply if the Product is used in conjunction with compatible 
computers, peripheral equipment and software. Canon USA shall have no responsibility for such 
items except for compatible Canon brand peripheral equipment covered by a separate warranty 
(“Separate Warranty”). Repairs of such Canon brand peripheral equipment shall be governed by the 
terms of the Separate Warranty. Non-Canon brand equipment and software that may be distributed 
with the Product are sold “as is” and without  warranty of any kind by Canon USA, including any 
implied warranty regarding merchantability or fitness  for a particular purpose, and all such warranties 
are disclaimed. The sole warranty, if any, with respect to such non-Canon brand items is given by the 
manufacturer or producer thereof.
This limited warranty covers all defects encounter ed in normal use of the Product and does not apply 
in the following cases:
(a) Loss of or damage to the Product due to abus e, neglect, mishandling, improper packaging 
by you, alteration, accident, electrical current  fluctuations, improper use, failure to follow 
operating or maintenance instructions in,  or environmental conditions prescribed in, Canon 
USA’s user’s manual or other documentation,  or services performed by someone other than 
a Canon USA repair facility or ASF. Without  limiting the foregoing, dropping the Product, 
scratches, and abrasions will be  presumed to have resulted from misuse, abuse or failure to 
operate the Product as set forth in the user’s manual or other documentation for the Product.
(b) Use of parts, media, software or supplies (other than those sold by Canon USA), including  non-Canon ink cartridges or refilled ink ca rtridges, that cause damage to the Product or 
cause abnormally frequent service  calls or service problems.
(c) If the Product has had its serial number or dating defaced, altered or removed.
ANY SYSTEM SOFTWARE (WHETHER FACT ORY LOADED ON THE PRODUCT OR 
CONTAINED ON THE SOFTWARE DISKETTE S OR CD-ROMS ENCLOSED WITH, OR 
ACCOMPANYING, THE PRODUCT), AND ANY UTILITY SOFTWARE, DISTRIBUTED WITH OR 
FOR THE PRODUCT, IS SOLD “AS IS” AND WITHOUT WARRANTY BY CANON USA. THE SOLE 
WARRANTY WITH RESPECT TO SUCH SOFTWARE IS CONTAINED IN THE SOFTWARE 
MANUFACTURER’S LICENSE AGREEMENT DIST RIBUTED THEREWITH, INCLUDING ANY 
LIMITATIONS AND DISCLAIMERS THEREON.  PLEASE CONTACT CANON USA IMMEDIATELY 
IF YOU HAVE NOT RECEIVED A COPY OF  THE SOFTWARE MANUFACTURER’S LICENSE 
AGREEMENT.
NO IMPLIED WARRANTY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE, APPLIES TO THE PRODUCT AFTER THE 
APPLICABLE PERIOD OF THE EXPRESS LIMITED WARRANTY STATED ABOVE, AND NO 
OTHER EXPRESS WARRANTY OR GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY 
ANY PERSON OR ENTITY WITH RESPECT TO  THE PRODUCT SHALL BIND CANON USA, OR 
ITS ASF. (SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED 
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.) CANON USA 
SHALL NOT BE LIABLE FOR LOSS OF REVENU ES OR PROFITS, INCONVENIENCE, EXPENSE 
FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR CORRUPTION 
OF DATA, OR ANY OTHER SPECIAL, INCIDENT AL OR CONSEQUENTIAL DAMAGES CAUSED 
BY THE USE, MISUSE, OR INABILITY TO  USE THE PRODUCT REGARDLESS OF THE LEGAL 
THEORY ON WHICH THE CLAIM IS BASED, AND  EVEN IF CANON USA OR ITS ASF HAS BEEN 
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND 
AGAINST CANON USA OR ITS ASF BE GREATE R IN AMOUNT THAN THE PURCHASE PRICE 
OF THE PRODUCT CAUSING THE ALLEGED DAMA GE. WITHOUT LIMITING THE FOREGOING, 
YOU ASSUME ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR 
PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE POSSESSION, 
USE, MISUSE, OR INABILITY TO USE THE PRODUCT SOLD BY CANON USA NOT CAUSED 
SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON USA, OR ITS ASF. (SOME STATES 
DO NOT ALLOW THE EXCLUSION OR LIMITATI ON OF INCIDENTAL OR CONSEQUENTIAL 
DAMAGES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.) THIS 
LIMITED WARRANTY SHALL NOT EXTEND TO  ANYONE OTHER THAN THE ORIGINAL 
 
						

							94
PURCHASER OF THE PRODUCT OR THE PERSON FOR WHOM IT WAS PURCHASED AS A 
GIFT, AND STATES YOUR EXCLUSIVE REMEDY.
Canon USA offers a range of customer technical support* options:
z Interactive troubleshooting, e-mail technical s upport, the latest driver downloads and answers to 
frequently asked questions ( www.canontechsupport.com )
z Toll-free live technical support Monday—Sat urday (excluding holidays) at 1-800-828-4040
z Telephone Device for the Deaf (TDD-1-866-251-3752)
z Repair or Exchange Service Options: 
In the event service is required for the Product during the limited warranty period, Canon USA 
offers two hardware support options:
Authorized Service Facility Carry-In / Mail-In Service
Canon USA’s Carry-In/Mail-In Service provides  repair or exchange, at Canon USA’s option, 
through Canon USA’s Authorized Service Faci lity (ASF) network. The name and telephone 
number of the ASF(s) near you may be obtained from Canon USA’s Web site at 
www.canontechsupport.com  or by calling the Canon USA Customer Care Center at 1-800-
828-4040, or any time while speaking to a techni cal support person. A Product covered by this 
limited warranty will be repaired or exchanged,  as determined by Canon USA, and returned 
without charge by the ASF.
InstantExchange Service **
A Canon Customer Care Center or ASF technici an will attempt to diagnose the nature of the 
problem and, if possible, correct it over the te lephone. If the problem cannot be corrected over 
the telephone, and you elect the InstantExchange  option, a reference number will be issued to 
you. You will be asked for the Product serial nu mber and other information pertaining to your 
Product and for a ship-to location for the r eplacement Product (must include street address).
The Canon USA repair facility will ship out  the replacement Product prepaid by Canon USA. 
After receipt of the replacement Product (with in structions and a prepaid waybill), follow the 
enclosed instructions on how to ship your product  to the Canon USA repair facility. Your Product 
must be returned in the shipping carton in wh ich the replacement Product was packed and 
include the reference number, A COPY OF YOUR DATED PROOF OF PURCHASE (BILL OF 
SALE), and a complete explanation of the  problem. DO NOT INCLUDE ANY OTHER ITEMS 
WITH THE YOUR PRODUCT IN THE RETURN SHIPPING CARTON, AND BE SURE TO 
RETAIN YOUR PRINTHEAD, INK CARTRIDGE(S) AND TANK(S).
InstantExchange Service exchanges your Produc t with a replacement Product, which will 
normally be shipped the same day if your request  for this service is by 3 p.m. E.T. Monday 
through Friday, except holidays. Canon USA does not guarantee same day shipment in the 
event of the occurrence of factors beyond its  reasonable control. The replacement Product you 
receive may be a refurbished or reconditioned uni t and will be covered for the balance of the 
period remaining on your origin al limited warranty. NOTE THAT BY USING THIS SERVICE YOU 
WILL KEEP THE REPLACEMENT PRODUCT THAT IS SENT TO YOU. CANON USA WILL 
RETAIN THE PRODUCT THAT YOU ORIGINALLY PURCHASED, WHICH SHALL BECOME 
THE PROPERTY OF CANON USA. InstantExchange  warranty program service is available only 
during the express limited-warranty period for your  Product and only in the continental United 
States, Alaska and Hawaii during such period.
This limited warranty gives you specific legal righ ts, and you may also have other rights, which vary 
from state to state.
* Support program specifics are s ubject to change without notice.
** InstantExchange warranty service is subject to th e availability of refurbished or new replacement 
units.
 
						

							95
Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042
USA
Canon is a registered trademark of Canon Inc.
© 2007 Canon U.S.A., Inc. Canon is a registered trademark of Canon Inc. in the United States and 
may also be a registered trademark in other countries. 
 
						

							96
Index
A
Appendix 85
B
Before Using the Printer 2
CCanon U.S.A., Inc. Limited Warranty - U.S. Only 92
Cleaning exterior
 57
inside 59
protrusions inside the printer 62
roller 57
I
Ink Lamp ink level indication on the computer 29
ink level indication on the printer 28
L
Loading Printing Paper Cassette 14
envelopes 17
Rear Tray 12
recommended paper and requirements 5
small-sized paper 20
MMedia cannot use 6
specialty 4
Media Type 5
NNozzle Check Pattern examining 37
printing 35
P
Print Head automatic print head alignment 43
cleaning 38
deep cleaning 41
manual print head alignment 47
Printing from Your Computer 22
Macintosh 23
Windows 22
Printing Photographs Directly from a Compliant  Device
 24
PictBridge print settings 26
R
Replacing Ink Tanks 30
ink status information 28
Routine Maintenance 28
replacing ink tanks 30
S
Safety Precautions 89
Specialty Media 4
Specifications general
 87
PictBridge 87
System Requirements 88
TTroubleshooting 63
Turning off the Printer 3
Turning on the Printer 2