Canon Pixma Ip4000 Quick Start Guide

Basic Printing
7
„Loading 4" x 6"-Sized Paper in the Sheet Feeder
(4) Select 44" x 6" from PPaper Size in the printer driver.
For a detailed description of the printer driver settings, refer to “P
Printing with 
Windows”on page 15, or “P
Printing with Macintosh”on page 18.
(1) Load the paper into the 
Sheet Feeder and align 
the paper stack against 
the right side of the 
Sheet Feeder.
• Load the paper lengthways 
regardless of the direction of 
the document.
• You can load up to 20...

Basic Printing
8
„Loading Plain Paper in the Cassette
zFor detailed information on the specialty media Canon provides for use 
with its various printers, refer to “U
Using Specialty Media”on page 13.
zSee “Printing Media” in the 
User’s Guide for detailed instructions on 
how to load envelopes and specialty media into the printer.
1Flatten the four corners of the paper before loading it.
When paper is curled, hold the opposing curled corners and gently bend 
them in the opposite direction until the paper...

Basic Printing
9
3Load the paper.
zYou can use general copy paper or Canon’s Super White Paper SW-201. 
zYou can load up to 150 sheets of plain paper (64 gsm or 17 lb, 13 mm 
or 0.52 inches in height) in the Cassette. However, do not stack more 
than 50 sheets in the Paper Output Tray.
(2) Align the paper stack against the 
right side of the Cassette.
(3) Slide the paper guides to fit the 
loaded paper stack. Load Limit Mark 
Do not load beyond this Load Limit 
Mark.
(1) Load the paper into the Cassette...

Basic Printing
10
4Insert the Cassette into the printer.
If the Cassette had been extended to accommodate paper sizes larger 
than 5"x7", the front edge of the cassette will extend beyond the front of 
the printer.
(1) Set the Cover on the 
Cassette.
(2) Insert the Cassette into the 
printer.
Push the Cassette all the way 
into the printer.
 

Basic Printing
11
5Prepare the Paper Output Tray.
You can also select the paper source with the printer driver. For details, 
refer to “Changing the Paper Source” in the 
User’s Guide.
(1) 1 Push the upper center 
( ) of the Front Cover to 
open the Paper Output Tray.
2 Pull out the Paper Output Tray 
Extension completely.
Support the Front Cover with 
your hand when opening the 
tray.
Cassette 
Lamp
(2) Press the Paper Feed Switch so 
that the Cassette Lamp lights.
1
2
 

Basic Printing
12
„Loading 4" x 6"-Sized Paper in the Cassette
Do not leave photo paper, such as Photo Paper Pro, in the Cassette for a 
long time. This may cause paper discoloration due to natural aging.
(5) Select 4
4" x 6" from PPaper Size in the printer driver.
For a detailed description of the printer driver settings, refer to “P
Printing with 
Windows”on page 15, or “P
Printing with Macintosh”on page 18.
(1) Load the paper into the Cassette 
with the print side facing DOWN.
(2)...

Basic Printing
13
Using Specialty Media
Canon recommends that you use genuine Canon media to ensure optimal print quality.
„Photo Quality Media
• Photo Paper Pro
• Photo Paper Plus Glossy
• Photo Paper Plus Semi-gloss
• Matte Photo Paper
• Glossy Photo Paper
• High Resolution Paper
„Media Suited for Business 
Documents
•High Resolution Paper
•Transparencies
 

Basic Printing
14
„Canon Specialty Media
* If paper does not feed properly, fan the paper to prevent sticking together. Then, load one sheet at a time.
zWhen using plain paper (64 gsm or 17 lb), up to 150 sheets (13 mm or 
0.52 inches in height) can be loaded in the Sheet Feeder and Cassette 
respectively. Select P
Plain Paper from MMedia Type in the printer driver.
zFor a detailed description of printing media types, refer to the 
User’s 
Guide.
Media TypePaper Support Load LimitPrinter Driver Setting...

Basic Printing
15
Printing with Windows
zThe menu screens and dialog boxes that appear may vary, depending on the 
software application you are using.
zThe steps described in this section are for printing in Windows XP.
1Turn on the printer.
See“TTurning on the Printer”on page 2.
2Load the paper in the printer.
See“LLoading Paper”on page 3.
3Ensure that the proper paper source is selected.
4Create a document or open a file to print.
When the Cassette Lamp is lit, paper 
is fed from the Cassette.
When the...

Basic Printing
16
5Open the PPrinter Properties dialog box.
(1) Select PPrint from the application software’s FFile menu.
The P
Print dialog box opens.
6Specify the required settings.
(2) Ensure that your printer 
is selected. 
(3) Click P
Preferences or 
Properties.
(1) Click MMedia Type to select 
the type of media loaded in 
the printer.
(2) Click OOK.
Ensure that PPaper Feed 
Switch is selected from 
PaperSource.