Canon Pixma Ip1900 User Guide

Note
Effect levels can be changed using the slider below Digital Face Smoothing.
Click  (Compare) to display the images before and after the enhancement side by side so
that you can compare and check the result.
Click Reset Selected Image to undo the enhancement operation.
If you want to apply the enhancement to all the selected images at once, select the Apply to all
images checkbox.
Manual Enhancement
3.Click Manual, then click Correct/Enhance.
4.Click Digital Face Smoothing.
Move the cursor over the...

Only JPEG/Exif file format is available for enhanced images.
7.Click Exit.
Note
The enhancements will be lost if you exit before saving enhanced images.
Page top
Стр. 132 из 334 стр. Using the Digital Face Smoothing Function
 

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting andEnhancing Photos > Using the Blemish Remover Function
Using the Blemish Remover Function
You can remove moles.
1.Select photos in the Select Images screen, then click  (Correct/Enhance
Images).
The Correct/Enhance Images window appears.
Note
You can also display the Correct/Enhance Images window by clicking  (Correct/Enhance
Images) in the Layout/Print or Edit screen. In that case, only the image...

5.Drag to select the area you want to enhance, then click OK that appears over the
image.
Moles in and around the selected area are removed and the  (Correction/Enhancement) mark
appears on the upper left of the image.
Note
Click Undo to undo the preceding enhancement operation.
6.Click Save Selected Image or Save All Corrected Images.
You can save enhanced images as new files.
Note
To save only the image you like, click Save Selected Image. To save all images, click Save All
Corrected Images.
Only...

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting andEnhancing Photos > Adjusting Images
Adjusting Images
You can make fine adjustments to the overall brightness, contrast, etc. of images.
1.Select photos in the Select Images screen, then click  (Correct/Enhance
Images).
The Correct/Enhance Images window appears.
Note
You can also display the Correct/Enhance Images window by clicking  (Correct/Enhance
Images) in the Layout/Print or Edit screen. In...

Note
Click Defaults to reset all adjustments.
5.Click Save Selected Image or Save All Corrected Images.
You can save adjusted images as new files.
Note
To save only the image you like, click Save Selected Image. To save all images, click Save All
Corrected Images.
Only JPEG/Exif file format is available for adjusted images.
6.Click Exit.
Note
The adjustments will be lost if you exit before saving adjusted images.
Page top
Стр. 136 из 334 стр. Adjusting Images
 

Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting andEnhancing Photos > Correct/Enhance Images Window
Correct/Enhance Images Window
You can correct/enhance images in this window.
To display the Correct/Enhance Images window, click 
 (Correct/Enhance Images) in the Select
Images or Edit screen, or in the Layout/Print screen of Photo Print.
(1)Toolbar
Toolbar
 (Zoom In/Zoom Out)
Displays the enlarged or reduced preview of the page.
 (Full Screen)...

(2)Task Area
Available tasks and settings may vary between the Auto and Manual tabs.
Click Auto or Manual to display the corresponding tab.
Auto Tab
Select to correct automatically.
Auto Photo Fix
Applies automatic corrections suitable for photos.
Important
The Auto Photo Fix function is not available for Photo Print. Photo Print allows you to
automatically apply suitable corrections to all photos when printing. Select this option in Image
on the Advanced tab of the Preferences dialog box. To display the...

Face Sharpener
Sharpens out-of-focus faces.
You can adjust the effect level using the slider.
Digital Face Smoothing
Enhances skin beautifully by removing blemishes and wrinkles.
You can adjust the effect level using the slider.
Apply to all images
Automatically corrects all the images displayed in the list.
OK
Applies the selected effect to the selected image or all images.
Reset Selected Image
Cancels all corrections and enhancements applied to the selected image.
Save Selected Image
Saves the selected...

Blur
Blurs the outline of the subjects to soften the image.
Move the slider to the right to soften the image.
Show-through Removal
Removes show-through of text from the reverse side or removes the base color. Adjust the show-
through level to prevent text on the reverse side of thin document or the base color of the document
from appearing on the image.
Move the slider to the right to increase the show-through removal effect.
Defaults
Resets all adjustments (brightness, contrast, sharpness, blur, and...