Canon Pixma Ip110 User Guide

Execute Borderless PrintingThe borderless printing function allows you to print data without any margin by enlarging the data so that it
extends slightly off the paper. In standard printing, margins are created around the document area.
However, in borderless printing function, these margins are not created. When you want to print data such
as a photo without providing any margin around it, set borderless printing.
The procedure for performing borderless printing is as follows:
You can also set...

Check the Page Size list. When you want to change it, select another page size from the list. The list
displays only sizes that can be used for borderless printing.4.
Adjust the amount of extension from the paper
If necessary, adjust the amount of extension using the  Amount of Extension slider.
Moving the slider to the right increases the amount extending off the paper, and moving the slider to
the left decreases the amount. It is recommended to set the slider at the second position from the right for...

Important•
When the amount of extension is decreased, an unexpected margin may be produced on the print,depending on the size of the paper.
Note
•
When the  Amount of Extension  slider is set to the leftmost position, image data will be printed in the
full size. If you set this when printing the address side of a postcard, the postal code of the sender is
printed in the correct position.
•
When  Preview before printing  is checked on the Main tab, you can confirm whether there will be no
margin before...

Fit-to-Page Printing
The procedure for printing a document that is automatically enlarged or reduced to fit the page size to be
used is as follows:
1.
Open the printer driver setup window
2.
Set fit-to-page printing
Select  Fit-to-Page  from the Page Layout  list on the Page Setup  tab.
3.
Select the paper size of the document
Using  Page Size , select the page size that is set with your application software.
4.
Select the print paper size
Select the size of the paper loaded in the printer from the...

5.
Complete the setup
Click  OK.
When you execute print, the document will be enlarged or reduced to fit to the page size.
285
 

Scaled Printing
The procedure for printing a document with pages enlarged or reduced is as follows:
1.
Open the printer driver setup window
2.
Set scaled printingSelect  Scaled  from the  Page Layout  list on the Page Setup  tab.
3.
Select the paper size of the document
Using  Page Size , select the page size that is set with your application software.
4.
Set the scaling rate by using one of the following methods:
•
Select a Printer Paper Size
When the printer paper size is smaller than the  Page Size,...

•
Specify a scaling factorDirectly type in a value into the  Scaling box.
The current settings are displayed in the settings preview on the left side of the printer driver.
5.
Complete the setup
Click  OK.
When you execute print, the document will be printed with the specified scale.
Important
•
When the application software which you used to create the original has the scaled printing function,
configure the settings on your application software. You do not need to configure the same setting in
the...

Note•
Selecting Scaled changes the printable area of the document.288
 

Page Layout PrintingThe page layout printing function allows you to print more than one page image on a single sheet of paper.
The procedure for performing page layout printing is as follows:
1.
Open the printer driver setup window
2.
Set page layout printing
Select  Page Layout  from the Page Layout  list on the Page Setup  tab.
The current settings are displayed in the settings preview on the left side of the printer driver.
3.
Select the print paper size
Select the size of the paper loaded in the...

PagesTo change the number of pages to be printed on a single sheet of paper, select the number of
pages from the list.
Page Order To change the page arrangement order, select a placement method from the list.
Page Border To print a page border around each document page, check this check box.
5.
Complete the setup
Click  OK on the  Page Setup  tab.
When you execute print, the specified number of pages will be arranged on each sheet of paper in the specified order.
290