Canon network camera VBS800D User Manual

							Log Viewer
111
5
Admin Tools
„Saving a Log to a File/Opening a Saved Log
How to Save
Click [Save to local file] and save using the [Save As] 
dialog box.
How to View
Click [Open local file] and select a log file using the 
[Open] dialog box.
„Copying/Searching Logs
How to Copy
Click to select the log you want to copy, and then click 
[Copy].
How to Search
Enter the character string for which you want to search in 
[Search for] and click [Search].
If the searched log is found, it is shown as selected. 
Click [Previous] or [Next] to search the log above or 
below. Lines of logs found are shown as selected.
„Showing All Logs
Select the [Show all logs] checkbox.
When selected, even logs without a log code are shown if 
[Not specified] is selected for the log type [Filter].
„Showing Filtered Logs
You can filter logs by type, code and date & time to show 
only the necessary information. Set the following conditions and click [Apply filter] to show 
only the logs matching the specified conditions.
[Log Type] 
Select the [Specify type] or [Specify code] checkbox to 
filter logs by type. If you do not want to filter logs by type, 
select [Not specified]. 
• Specify type
Specify the log level
Select [Error], [Warning] or [Information] for the level of 
logs to be shown. 
Specify log output module
Select [Application], [HTTP Server] or [System] for the 
output source module whose logs will be displayed. 
 Specify code
Specify the log code. Only logs whose code contains 
the entered characters are shown. If “A0” is entered, 
for example, logs starting with “A0” are displayed. 
[Date & Time] 
Specify start date & time] checkbox
When this checkbox is selected and a date and time 
are entered, logs generated on or after the specified 
date and time are shown.
Specify end date & time] checkbox
When this checkbox is selected and a date and time 
are entered, logs generated on or before the specified 
date and time are shown.
Note
[Application], [HTTP Server], and [System] support the List of 
Log Messages (p. 148).
Important
Logs saved in the cameras internal memory are cleared when 
you perform [Maintenance] > [Restore Default Settings] and 
[Reboot], or press the reset switch on the camera. 
						

							112
This utility manages video recorded on a memory card. It allows you to play back recorded video and download it to a 
computer, display a video list or perform filtering.
Display Screens of Recorded Video Utility
(1) [Refresh Video List]
Update the video list to the current state.
(2) [Refresh Download Status]
Update video download status to the current state.
(3) [Memory Card Details]
Displays the dialog box for details about the memory 
card.
(4) [Number of Videos]
Displays the number of videos in the video list.
(5) [Select All]
Select all video in the video list.
(6) [Export to mov format]
Export the [Downloaded] video selected in the video 
list to a mov format video file.
(7) [Enable H.264 playback] checkbox
Select to play H.264 video in the [Playback Videos] 
area (p. 115).
(8) Video List
Displays a list of videos recorded on a memory card 
and downloaded to a computer.
(9) [Delete from Camera]
Delete videos selected in the video list from the 
memory card.(10)[Download]
Download videos selected in the video list to a 
computer.
(11)[Download to]
Specify the folder that videos are downloaded to.
(12)[Filter]
Click [Filter] to open or close the filter area. Sets 
criteria to narrow down the number of items displayed 
in the video list (p. 113).
(13)[Playback Videos] Area
Plays videos selected in the video list (p. 114).
Recorded Video Utility
(1)
(12)(8)
(11) (10)(9) (5)
(6) (4)(2) (3) (7)
(13) 
						

							Recorded Video Utility
113
5
Admin Tools
Confirming Recorded Video
The video list displays the following information:
[Date & Time]
Displays the date and time of a video recording.
[Format]
Displays the format of a recorded video ([JPEG] or 
[H.264]).
[Recording Type]
Displays the type of recorded video ([Upload], 
[Recording-Mode Stream], [Manual], [Timer], [Event]).
[Upload] indicates videos that failed to upload from the 
camera, and [Recording-Mode Stream] indicates videos 
where video transmission failed when using RM 
recording-mode stream. 
[Video in Camera]
Displays whether or not any video remains on a memory 
card. When video has been deleted from a memory card 
after downloading it, this indicator displays [No].
[Download Status]
Displays download status of video ([Downloaded], [Not 
Downloaded], [Partially Downloaded]).
Note
Clicking a header in each column sorts the video list.
„Refreshing Video List
Click [Refresh Video List] to update the video list to the 
current state.
Click [Refresh Download Status] to update download 
status of the video list to the current state.
Selecting Videos
Click a video to select it. Use the Ctrl key or the Shift key 
while clicking to select multiple videos.Click [Select All] to select all videos on the list.
Narrowing Down the Number of Videos
Use [Filter] to narrow down the number of videos that 
appear in the video list to the ones you need.
Set the following conditions and click [Apply filter] to show 
only the videos matching the specified conditions.
[Date & Time]
Specify start date & time] checkbox
When this checkbox is selected and a date and time 
are entered, videos recorded on or after the specified 
date and time are shown.
Specify end date & time] checkbox
When this checkbox is selected and a date and time 
are entered, videos recorded on or before the 
specified date and time are shown.
[Video Format]
Select [Specified] and select the checkboxes for the 
video format ([JPEG] or [H.264]) (multiple selections 
possible).
[Recording Type]
Select [Specified] and select the checkboxes for the type 
of video recording ([Upload], [Recording-Mode Stream], 
[Manual], [Timer], [Event]) (multiple selections possible).
[Video in Camera]
Select [Not specified], [Yes] or [No].
[Download Status]
Select [Specified] and select the checkboxes for the 
status of video download ([Downloaded], [Not 
Downloaded], [Partially Downloaded]) (multiple selections 
possible). 
						

							114
Downloading Video
Download video recorded on a memory card to a 
computer.
Click [Browse] to specify a folder.
The video is downloaded to the specified folder.
Note
When the download folder is changed, the download status of the 
files in the download folder prior to the change becomes [Not 
Downloaded]. Manually copy the files in the download folder 
prior to the change to the new download folder to change their 
status to [Downloaded].
Downloaded videos are stored in a folder that is automatically 
created within the specified destination folder and named using 
the camera IP address (for example, [192.168.100.1]). Quit the 
Recorded Video Utility before using explorer to browse the 
folders before and after the change and copy the contents of the 
folder with the same name as the camera IP address.
After copying, start up the Recorded Video Utility, click [Refresh 
Download Status] and the manually copied files will appear in the 
video list.
For details on the folder configuration and file naming rules for 
the download location, see “Directory Structure for Data 
Downloaded with Recorded Video Utility” (p. 142) in “Chapter 7 
Appendix”.
Exporting to Video Files That Can Be 
Played Back
Videos downloaded from a memory card to a computer 
can be exported to video files that can be played back on 
a computer.
For H.264 video, subdivided files are merged into a single 
file. 
Videos whose [Download Status] is labeled 
[Downloaded] in the video list can be exported.The [Browse For Folder] dialog box appears.
The video is exported.
Note
 The exported video files can be played back using QuickTime 
7.7 and Windows Media Player 11/12. For Windows Vista and 
earlier, use QuickTime. However, playback when using this 
software is not guaranteed.
 A recorded JPEG video whose size is changed during 
recording and exported to a mov file cannot be played back by 
Windows Media Player. Use QuickTime to play it back.
Playing Back Videos
Videos selected in the video list can be played back in the 
[Playback Videos] area.
The appearance and operations of the [Playback Videos] 
area differ depending on the selected video format.
„For JPEG
[Recording Date & Time]
Displays the date and time of video frames that are being 
displayed.
[Playback Frame No.]
Displays frame numbers and total number of video frames 
that are being displayed.
[Playback Interval]

JPEG video is played back in real time interval 
according to the recording time. The preceding JPEG 
video appears in an empty frame.
 [Equal Interval]
JPEG video is played back at a 1-second interval.
1Specify the folder to download video to in [Download 
to].
2Select a video to download in the video list.
3Click [Download].
Important
Since the Recorded Video Utility processes both files 
downloaded to a computer and its original videos recorded on 
the memory card, the video list will not display correctly if files 
downloaded to a computer are manually deleted. In this case, 
click [Refresh Download Status] to refresh status of data 
downloaded to a computer.
1Select a video to export in the video list.
2Click [Export to mov format].
3Select a folder to export to and click [OK]. 
						

							Recorded Video Utility
115
5
Admin Tools
Note
 [Real Time] can be selected only for playback of downloaded 
videos.
 [Not Downloaded] or [Partially Downloaded] videos may not be 
played back in the order they were recorded.
Slider/Playback Control
Drag the slider to change playback position.
The following buttons can also be used for playback.
[Save Playback Frame As]
Video frames that are being played back can be saved as 
a separate file.
„For H.264
Select the [Enable H.264 playback] checkbox to play 
H.264 video in the [Playback Videos] area.
The Software Product License Agreement dialog box 
appears. Click [Yes] to accept the terms of the license 
agreement. The decoder is downloaded from the camera, 
enabling H.264 video playback. [Recording Date & Time]
Displays the date and time of video frames that are being 
displayed.
[Playback File No.]
Displays file numbers and total number of video files that 
are being displayed.
Note
 The H.264 video playback interval varies depending on the 
download status. 
If the download status is [Downloaded], each frame is played 
back in real time interval according to the recording time. For 
empty frames, the preceding frame is displayed. 
If the status is [Not Downloaded] or [Partially Downloaded], 
empty frames are skipped upon playback. If a file is played 
back while still downloading, playback may momentarily pause 
when switching files, depending on the network environment. 
 [Not Downloaded] or [Partially Downloaded] videos may not be 
played back in the order they were recorded. 
Slider/Playback Control
Drag the slider to change playback position.
The following buttons can also be used for playback.
ButtonDescription
Move to first frame
Move to previous frame
Fast rewind
Playback
Pause
Fast forward
Move to next frame
Move to last frame
ButtonDescription
Move to first frame
Move to previous frame
Playback
Pause
Move to next frame
Move to last frame 
						

							116
[Save Playback Frame As]
Video frames that are being displayed can be saved as a 
separate file.
Clear the [Enable H.264 playback] checkbox to play 
H.264 video in an external player.
[Number of downloaded video files]
The number of downloaded files the video consist of is 
displayed.
[Playback with External Player]
Start up the external player (Windows Media Player, etc.) 
and the selected video is played back.
[Open Video folder]
Open the folder storing the selected video. Double click 
the video file in the folder to play it back.
Note
 When the data size for mov type files is 1 MB or greater, they 
are split into several files.
 If mov files are split into several files, only the initial few 
seconds of the first file can be played back.
 The downloaded video files can be played back using 
QuickTime 7.7 and Windows Media Player 11/12. For the 
Windows Vista operating system or earlier, use QuickTime. 
Use of these applications does not guarantee playback.]
Deleting Videos
You can delete videos from a memory card.
The video is deleted from the camera.
Note
If the selected videos contain [Not Downloaded] videos, a 
message prompting you to confirm deletion appears. Click [OK] 
to delete the video.
Displaying Memory Card Information
Click [Memory Card Details] to display information on the 
memory card inserted in the camera.
1Select a video to delete in the video list.
2Click [Delete from Camera]. 
						

							117
Admin Tools
5
This panel is used to adjust video from the camera that is 
displayed by each Admin Tool. The panel is available to 
the Privacy Mask Setting Tool, View Restriction Setting 
Tool, Preset Setting Tool and Intelligent Function Setting 
Tool.
Using Control for Admin
Click the [Control for Admin] button to display the Control 
for Admin Panel.
„Opening/Closing Control Items
Clicking the title of a control item will open or close the 
setting items.
The Admin Control Panel will appear and you can open 
the various control items even without obtaining the 
camera control privileges, but the items will be grayed 
out.
„Operating the Control Items
The panel operates in the same way as Control for Admin 
of the Admin Viewer.
[Smart Shade Control]
You can set Smart Shade Control. For details, see “Setting 
the Smart Shade Control” (p. 135).
[Focus] 
You can adjust focus. For details, see “Setting the Focus” 
(p. 135).
[Exposure]
You can adjust exposure. For details, see “Setting the 
Exposure” (p. 135).
Note
The items for the Intelligent Function Setting Tool’s Control for 
Admin will be grayed out if the [Lock camera position] checkbox 
is selected (p. 101) in the Intelligent Function Setting Tool.
Control for Admin
⇔ 
						

							118 
						

							Chapter 6
Admin Viewer/VB Viewer
❏Differences between the Admin Viewer and the VB Viewer
❏User Authorities and Camera Control Privileges
❏Viewer Startup and Operation
❏Camera Control and Obtaining Camera Control Privileges
❏Admin Viewer Operation and Settings 
						

							120
Accessing this viewer via a web browser allows you to display video and operate the camera. 
Two types of viewer are available, the Admin Viewer and the VB Viewer.
Major Differences Between the Admin 
Viewer and the VB Viewer
 The operable ranges differ between the viewers. 
Admin Viewer: 
Users can use the administrative control functions, 
such as shooting adjustment settings or event 
detection display.
VB Viewer: 
This viewer is limited to basic video operations for 
viewing video.
 Accessible controls are different. 
Admin Viewer: 
Users with privileged camera control can use this 
viewer.
Password authentication is required. 
Authorized users must have privileged camera 
control assigned by the Administrator beforehand 
(p. 60).
VB Viewer: 
Users with camera control authority can use this 
viewer. You can set the applicable options to 
enable/disable authentication, etc. 
User Authorities and Camera Control 
Privileges
User authorities and their relative camera control 
privileges are specified as follows. 
* Can be changed:  The Administrator can change the 
privileges of Authorized Users and Guest Users (p. 60).
The four authorities that can be set for users are privileged 
camera control, camera control, video distribution and 
audio distribution.
Users must have privileged camera control to use the 
Admin Viewer. 
Users must have the video distribution authority to display 
video using the VB Viewer. To operate the camera using 
the VB Viewer, users must also have camera control 
authority. 
Audio distribution authority is required to receive audio 
using the Admin Viewer and the VB Viewer. 
Overview of Viewer
Admin ViewerVB Viewer
User 
Authority
Camera Control Privileges
Video 
DistributionAudio 
DistributionPrivileged 
Camera 
ControlCamera 
Control
Administrator{{{{
Authorized 
user{
 (Can be 
changed) {
 (Can be 
changed) {
(Can be 
changed){
(Can be 
changed)
Guest user×{
 (Can be 
changed) {
(Can be 
changed){
(Can be 
changed)