Canon network camera VBS800D User Manual
Here you can view all the pages of manual Canon network camera VBS800D User Manual. The Canon manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 31
Chapter 3 Top Page of the Camera ❏Accessing the Setting Page, Admin Tools and Viewer
Page 32
32 Accessing the Top Page of the Camera From the top page of the camera, you can navigate to the Setting Menu to configure various camera settings, launch Admin Tools, and display the viewer to view video. The top page of the camera appears. (1) Language Button Click to switch the display language. The top page language switches to the selected language. (2)Setting Page (Setting Menu) Link Click to make detailed settings. See “Chapter 4 Setting Page”. (3) Admin Tools Link Click to use the Admin...
Page 33
Chapter 4 Setting Page ❏Administrator Password and Network Detailed Settings ❏Camera Date and Time Settings ❏Camera Name and Initial Camera Settings Related Settings ❏Video Size and Quality Settings ❏Upload and E-mail Notification Settings ❏Video Server, Audio Server and HTTP Server Settings ❏Settings Related to Events ❏User Registration/Authorities and Access Restriction Settings ❏IPsec Settings ❏HTTP Communication Encryption (SSL/TLS) Settings ❏ 802.1X Authentication ❏Memory Card Operations and...
Page 34
34 From the Setting Menu, you can navigate to each setting page to set various items regarding the camera. Information describing what can be set from each setting page is listed as follows. See each setting page for details. Administrator password, LAN, IPv4, IPv6, DNS and SNMP Settings (p. 37) Date and Time Camera date and time, time zone and daylight saving time settings (p. 40) Camera Camera name, initial camera settings, camera control, day/night, installation conditions, camera position...
Page 35
![Page 35
35
Setting Page
4
The various settings of the camera are configured by accessing the camera in the web browser. First, access the top page
of the camera (p. 32).
For details on entering the user name and password, see p. 32.
Setting Menu
(1) [Admin Viewer]
Clicking this button opens Admin Viewer.
(2) [Back to top]
Clicking this button navigates to the top page.
(3)Setting Menu
Clicking these navigates to each setting page.
Items Common to All Setting Pages
„Applying New Settings
When a setting is...](http://img.usermanuals.tech/thumb/14/1409/w300_network-camera-vbs800d-1478297701_d-34.png "Page 35
35
Setting Page
4
The various settings of the camera are configured by accessing the camera in the web browser. First, access the top page
of the camera (p. 32).
For details on entering the user name and password, see p. 32.
Setting Menu
(1) [Admin Viewer]
Clicking this button opens Admin Viewer.
(2) [Back to top]
Clicking this button navigates to the top page.
(3)Setting Menu
Clicking these navigates to each setting page.
Items Common to All Setting Pages
„Applying New Settings
When a setting is...")
35 Setting Page 4 The various settings of the camera are configured by accessing the camera in the web browser. First, access the top page of the camera (p. 32). For details on entering the user name and password, see p. 32. Setting Menu (1) [Admin Viewer] Clicking this button opens Admin Viewer. (2) [Back to top] Clicking this button navigates to the top page. (3)Setting Menu Clicking these navigates to each setting page. Items Common to All Setting Pages „Applying New Settings When a setting is...
Page 36
![Page 36
36
„Returning to the Setting Menu
Click [Settings menu] at the top right of each setting page
to return to the Setting Menu.
Note
Click on [Help] at the beginning of any item to display a
detailed explanation of that setting item.
Important
Do not open multiple setting pages at one time and try to
change the settings of a single camera.
Do not use the [Back] or [Forward] buttons in the web
browser to navigate between setting pages. The changed
settings may return to the original settings or...](http://img.usermanuals.tech/thumb/14/1409/w300_network-camera-vbs800d-1478297701_d-35.png "Page 36
36
„Returning to the Setting Menu
Click [Settings menu] at the top right of each setting page
to return to the Setting Menu.
Note
Click on [Help] at the beginning of any item to display a
detailed explanation of that setting item.
Important
Do not open multiple setting pages at one time and try to
change the settings of a single camera.
Do not use the [Back] or [Forward] buttons in the web
browser to navigate between setting pages. The changed
settings may return to the original settings or...")
36 „Returning to the Setting Menu Click [Settings menu] at the top right of each setting page to return to the Setting Menu. Note Click on [Help] at the beginning of any item to display a detailed explanation of that setting item. Important Do not open multiple setting pages at one time and try to change the settings of a single camera. Do not use the [Back] or [Forward] buttons in the web browser to navigate between setting pages. The changed settings may return to the original settings or...
Page 37
![Page 37
37
Setting Page
4
Administrator Password
(1) [Password]
Set the administrator password. Up to eight (single-
byte) ASCII characters (space or printable
characters) can be used. The factory default setting is
“camera”. If the Admin Viewer, Admin Tools, etc., are
connected, terminate the connection before changing
the password.
(2) [Confirm Password]
Enter the same password as above for confirmation. LAN
(1) [LAN Interface]
Select [Auto], [Full Duplex] or [Half Duplex]. Normally
[Auto] is used....](http://img.usermanuals.tech/thumb/14/1409/w300_network-camera-vbs800d-1478297701_d-36.png "Page 37
37
Setting Page
4
Administrator Password
(1) [Password]
Set the administrator password. Up to eight (single-
byte) ASCII characters (space or printable
characters) can be used. The factory default setting is
“camera”. If the Admin Viewer, Admin Tools, etc., are
connected, terminate the connection before changing
the password.
(2) [Confirm Password]
Enter the same password as above for confirmation. LAN
(1) [LAN Interface]
Select [Auto], [Full Duplex] or [Half Duplex]. Normally
[Auto] is used....")
37 Setting Page 4 Administrator Password (1) [Password] Set the administrator password. Up to eight (single- byte) ASCII characters (space or printable characters) can be used. The factory default setting is “camera”. If the Admin Viewer, Admin Tools, etc., are connected, terminate the connection before changing the password. (2) [Confirm Password] Enter the same password as above for confirmation. LAN (1) [LAN Interface] Select [Auto], [Full Duplex] or [Half Duplex]. Normally [Auto] is used....
Page 38
![Page 38
38
(5) [AutoIP]
Set AutoIP to [Disable] or [Enable].
(6) [IPv4 Address (AutoIP)]
When [Enable] is selected in (5), an automatically set
IP address is displayed.
IPv6
(1) [IPv6]
Set IPv6 use to [Disable] or [Enable].
(2) [Auto (RA)]
Select [Enable] to set an address automatically using
RA (Router Advertisement, network information
automatically transmitted from a router), or select
[Disable] not to set an address automatically.
(3) [Auto (DHCPv6)]
Select [Enable] to use DHCPv6 to set an address...](http://img.usermanuals.tech/thumb/14/1409/w300_network-camera-vbs800d-1478297701_d-37.png "Page 38
38
(5) [AutoIP]
Set AutoIP to [Disable] or [Enable].
(6) [IPv4 Address (AutoIP)]
When [Enable] is selected in (5), an automatically set
IP address is displayed.
IPv6
(1) [IPv6]
Set IPv6 use to [Disable] or [Enable].
(2) [Auto (RA)]
Select [Enable] to set an address automatically using
RA (Router Advertisement, network information
automatically transmitted from a router), or select
[Disable] not to set an address automatically.
(3) [Auto (DHCPv6)]
Select [Enable] to use DHCPv6 to set an address...")
38 (5) [AutoIP] Set AutoIP to [Disable] or [Enable]. (6) [IPv4 Address (AutoIP)] When [Enable] is selected in (5), an automatically set IP address is displayed. IPv6 (1) [IPv6] Set IPv6 use to [Disable] or [Enable]. (2) [Auto (RA)] Select [Enable] to set an address automatically using RA (Router Advertisement, network information automatically transmitted from a router), or select [Disable] not to set an address automatically. (3) [Auto (DHCPv6)] Select [Enable] to use DHCPv6 to set an address...
Page 39
![Page 39
[Network] Setting Administrator Password, LAN, IP Address, DNS, etc
39
4
Setting Page
(3) [Name Server Address (DHCP)]
Select [Use DHCP] or [Use DHCP/DHCPv6] in [Auto-
Setting of Name Server Address] to display the name
server address acquired from the DHCP server.
(4) [Name Server Address (DHCPv6)]
Select [Use DHCPv6] or [Use DHCP/DHCPv6] in
[Auto-Setting of Name Server Address] to display the
name server address acquired from the DHCPv6
server.
(5) [Host Name]
You can register the host name of...](http://img.usermanuals.tech/thumb/14/1409/w300_network-camera-vbs800d-1478297701_d-38.png "Page 39
[Network] Setting Administrator Password, LAN, IP Address, DNS, etc
39
4
Setting Page
(3) [Name Server Address (DHCP)]
Select [Use DHCP] or [Use DHCP/DHCPv6] in [Auto-
Setting of Name Server Address] to display the name
server address acquired from the DHCP server.
(4) [Name Server Address (DHCPv6)]
Select [Use DHCPv6] or [Use DHCP/DHCPv6] in
[Auto-Setting of Name Server Address] to display the
name server address acquired from the DHCPv6
server.
(5) [Host Name]
You can register the host name of...")
[Network] Setting Administrator Password, LAN, IP Address, DNS, etc 39 4 Setting Page (3) [Name Server Address (DHCP)] Select [Use DHCP] or [Use DHCP/DHCPv6] in [Auto- Setting of Name Server Address] to display the name server address acquired from the DHCP server. (4) [Name Server Address (DHCPv6)] Select [Use DHCPv6] or [Use DHCP/DHCPv6] in [Auto-Setting of Name Server Address] to display the name server address acquired from the DHCPv6 server. (5) [Host Name] You can register the host name of...
Page 40
![Page 40
40
Current Date and Time
[Date], [Time]
The date and time currently set in the camera are
shown.
Setting
(1) [Setting Method]
Select from [Set manually], [Synchronize with NTP
server], [Synchronize with NTP broadcast ],
[Synchronize with computer time].
(2) [Date], [Time]
Set the following according to the selection made in
[Setting Method].
[Set manually]
Set the desired date and time. The date is set by , and the time in 2 4 -h ou r f o rm at i n t he
order
[Synchronize with NTP server]...](http://img.usermanuals.tech/thumb/14/1409/w300_network-camera-vbs800d-1478297701_d-39.png "Page 40
40
Current Date and Time
[Date], [Time]
The date and time currently set in the camera are
shown.
Setting
(1) [Setting Method]
Select from [Set manually], [Synchronize with NTP
server], [Synchronize with NTP broadcast ],
[Synchronize with computer time].
(2) [Date], [Time]
Set the following according to the selection made in
[Setting Method].
[Set manually]
Set the desired date and time. The date is set by , and the time in 2 4 -h ou r f o rm at i n t he
order
[Synchronize with NTP server]...")
40 Current Date and Time [Date], [Time] The date and time currently set in the camera are shown. Setting (1) [Setting Method] Select from [Set manually], [Synchronize with NTP server], [Synchronize with NTP broadcast ], [Synchronize with computer time]. (2) [Date], [Time] Set the following according to the selection made in [Setting Method]. [Set manually] Set the desired date and time. The date is set by , and the time in 2 4 -h ou r f o rm at i n t he order [Synchronize with NTP server]...