Canon network camera VBS800D User Manual

List of Log Messages
151
7
Appendix
V200 Video input warning [warning] 
V300 Video input error [err] 
V320 Internal error in intelligent service [err] 
V321 Pseudo mode setting error in intelligent service 
[err] V400 Video input initialization error [crit] 
V401 Video input command error [crit] 
V402 Video input frozen [crit] 
V403 Video input error [crit] 
Description video %1 warning - %2 (V200) 
%1 Video number
%2 Error number
Meaning An error that permits recovery of the video 
input system was...

152
V420 Could not start intelligent service [crit] 
V421 Intelligent service error [crit] 
„Application (Memory Card) Messages
M001 Starting and stopping of memory card control 
module [info] 
M203 Not enough space on memory card [warning]
M204 Invalid file removed [warning]
M301 Memory card control module error [err]
„Application (Camera) Messages
C001 Starting and stopping of camera control module 
[info] 
C002 Camera application started [info] 
C201 Day/Night mode switching warning [warning] 
C211...

List of Log Messages
153
7
Appendix
H201 Timeout disconnect [warning] 
„System Messages
S001 System started [info] 
S002 System settings changed [info] 
S010 Event service started [info] 
S011 Event service shut down [info] 
S012 External device service started [info] 
S013 External device service shut down [info] 
S014 Timer service started [info] 
S015 Timer service shut down [info] S070 Change to SSL certificate [info] 
S302 Error on saving settings [err]
S303 Error on saving settings [err]
S307 Error...

154
S311 Working error in external input/output service 
[err] 
S312 Working error in timer service [err] 
S410 Event service initialization error [crit] 
S411 External input/output service initialization error 
[crit] S412 Timer service initialization error [crit] 
S413 Timer service runtime error [crit] 
„RTP-related Messages
R001 Startup of RTP distribution module [info]
R002 Stopping of RTP distribution module [info]
R003 RTSP PLAY request received [info]
Description cannot work extio [%1] [%2] [%3]...

List of Log Messages
155
7
Appendix
R004 RTSP TEARDOWN request received [info]
R005 Starting multicast [info]
R006 Stopping multicast [info]
R101 RTP session timeout [notice]R102 Information acquisition failure (RTP payload 
size) [notice]
R102 Information acquisition failure (IP address) 
[notice]
R103 RTSP authentication failure [notice]
R107 RTSP authentication failure or missing 
authentication information [notice]
R107 Insufficient resources [notice]
R301 Distribution communication error [err]...

156
R302 Parameter acquisition failure [err]
R303 Metadata distribution initialization failure [err]
R304 Abnormal termination of client [err]
R304 Client disconnected [err]
R304 Client disconnected [err]
R305 RTSP processing error [err]
Description cannot get parameter: %1 (R302)
%1 user_account: User account
IP_address: IP address of the camera
profile_media_configuration: 
MediaConfiguration information
RTSP_port_number: RTSP port number
Meaning Parameter acquisition has failed.
Description metadata...

157
Appendix
7
Messages Displayed in the Information Field
Messages displayed in the information field of the viewer are classified into the following three types.
„Information Messages
List of Viewer Messages
IconCategoryExplanation
  Information Message Help messages on various buttons, pull-down lists, etc., as well as frame rate and other 
information from the camera are shown. 
  Warning Message A message will be displayed notifying the user when camera control privileges cannot 
be obtained, the...

158
„Warning Messages
MessageExplanation
Could not connect to the camera.  Connection failed due to an invalid IP address, etc. 
The camera is busy.  The connection limit was exceeded. 
Failed to get camera control privileges.  The request for camera control privileges was denied because the camera 
was being used by the Admin Viewer, etc. 
Failed to establish audio connection.  Connection for audio reception failed. 
You are not connected to the camera.  An attempt was made to operate the camera when...

159
Appendix
7
It is recommended that you write down the settings for respective camera functions. If you have forgotten the settings and 
want to set the camera from the beginning, restore the factory default settings first. 
*For factory default settings, see p. 161. 
Restoring the Initial Setting from the 
Maintenance Page in the Web Browser
To display the settings menu, you need to enter the IP 
address of the camera, user name and administrator 
password (p. 32).  
The maintenance page appears. 
A...

160
The reset switch is located in a recessed area. Push 
the switch using the tip of a slender object such as a 
clip. 
All settings of the camera, except for the date and 
time, are restored to factory default settings. For top cover attachment, see the “Installation Guide” 
included with the camera.
3Turn on the power while pushing the reset switch, and 
keep pushing the reset switch for 5 seconds or more.
Important
If the reset switch is pushed, network-related settings will also 
be restored to...