Canon network camera VBR13 User Manual

							Camera Viewer
4
81
Confirming Recorded Video
Use the Recorded Video Utility to confirm and play back the video manually recorded to a memory card.
For details, please refer to “Recorded Video Utility User Manual”. 
						

							82
Open the [Video and Audio] menu to set the audio reception from the camera and the audio transmission from the Viewer 
and the corresponding volumes.
Receiving Audio
Receive audio from the microphone connected to the camera and play it back in the Viewer.
Audio reception starts.
The [Audio Reception] button icon will change  to active (purple) while receiving audio.
Note
 To receive audio, you must connect the microphone to the camera  and set [Server] > [Audio Server] > [Audio Transmission from 
the Camera] to [Enable] in the Setting Page (P. 153).
 While the icon is active (purple),  audio is constantly received even if  you close the [Video and Audio] menu.
 To use the audio function in environments that  use a proxy server, select [Use a proxy server for your LAN] in [Network and 
Internet] > [Internet options] > [Connections] tab > [LAN settin gs] > [Proxy server] in [Control Panel], then specify the camera IP 
address in [Advanced] > [Exceptions].
Transmitting Audio
You can transmit audio receiv ed from an external device connected to  the computer to a speaker with an amplifier 
connected to the camera.
Receiving/Transmitting AudioR13M50H652H651
1In the   [Video and Audio] menu, click the [Audio Reception] button.
2In [Output Volume], adjust the volume to  an appropriate level using the slider.
1In the   [Video and Audio] menu, select the maximum audio transmission time. 
						

							Camera Viewer
4
83
Audio transmission starts.
The [Audio Transmission] button icon will change to active (purple) while transmitting audio.
Note
 To transmit audio, you must first set [Server] > [Audio Server] > [Audio Reception from Viewer] to [Enable] in the Setting Pag e 
(P. 153).
 While the icon is active (purple),  audio is constantly transmitted even if  you close the [Video and Audio] menu.
 To use the audio function in environments that  use a proxy server, select [Use a proxy server for your LAN] in [Internet optio ns] > 
[Connections] tab > [LAN settings] > [Proxy server] in the Inter net Explorer, then specify the camera IP address in [Advanced] > 
[Exceptions].
 Only the Administrator can transmit audio from the Viewer.
2Click the [Audio Transmission] button.
3In [Input Volume], adjust  the volume to an appropriate level using the slider. 
						

							84
In the   [Event and Input/Output] menu, you can check the status of output/input operations of an external device, 
intelligent functions, and occurrence of linked events.
Operating External Device Output
You can operate output for t he external device set in [Event] > [Exter nal Device] (P. 161) on the Setting Page.
Click the icon to switch between the ac tive (purple)/inactive (gray) status.
Output 1: Output active
Output 2: Output inactive
Note
To operate [External Device Output] output, it is  necessary to obtain camera control privileges.
Checking the Status of Event Detection
(1) [External Device Input]
Displays the input status of the external device set in  [Event] > [External Device] (P. 162) on the Setting Page.
When a contact input signal is received from an external device, input will be activated and the icon becomes green.
Example:
Input 1: Input inactive
Input 2: Input active
(2) [Intelligent Function (Image Detection)] The status of video detection set in [E vent] > [Intelligent Function] > [Video De tection] (P. 175) is displayed for each 
detection setting number. When the det ection settings configured in Intelligent Function (Moving Object Detection, 
Abandoned Object Detection, Removed  Object Detection, Camera Tampering Detection, Passing Detection, or 
Intrusion Detection) are triggered, the corresponding icon will turn green.
Checking the Status of Event Detection
R13M50H652H651
(1)R13M50H652H651
(2)
(4)
R13M50H652H651
(3)R13R12
(5)R13M50H652H651
R13M50H652H651 
						

							Camera Viewer
4
85
If a name is entered in [Detection Settings Name] in [Event] > [Intelligent Function] on the Setting Page (P. 180), that 
name is displayed in [Set ting 1] - [Setting 15].
Example:
Setting 1: Image De tection status ON
Other settings: Image Detection status OFF
Note
The icon indicating the detection status will be displayed for a ma ximum of five minutes (except for Moving Object Detection).
(3) [Intelligent Function (Auto Tracking)]
Displays the status of Auto Tr acking set in [Event] > [Intelligent Function] > [Auto Tracking] (P. 192) in the Setting 
Page. If detection is triggered, the icon will turn green.
Example:
Auto Tracking status ON
(4) [Intelligent Function  (Audio Detection)]
Displays the status of [Volume  Detection] or [Scream Detection] set in [E vent] > [Audio Detection] (P. 164) in the 
Setting Page. If detection is triggered, the icon will turn green.
Example:
Volume: Volume Detection status ON
Scream: Scream Detection status OFF
(5) [Linked Events] Displays the status of linked  events for Intelligent Function set with [Event ] > [Linked Events] (P. 200) in the Setting 
Page. If a linked event is trigge red, the icon will turn green.
Example:
Setting 2: Linked Event status ON
Other settings: Linked Event status OFFR13R12
R13M50H652H651
R13M50H652H651 
						

							86 
						

							Chapter
 
Setting Page
The Setting Page enables you to configure all the settings required for using the camera. Please configure the 
settings in the Setting page according to how the camera will be used, before you use the camera.
The Setting Page also provides menus for when the camera is in operation; for example, camera maintenance. 
						

							88
This section explains operations up to displaying the Setting Page, and common Setting Page operations.
Note
 The Setting Page can only be operated by administrators.
 Use the Camera Management Tool in advance to configure  the administrator account and network settings (P. 39).
Accessing the Setting Page
Directly enter the IP address set in the Camera Management Tool (P. 40) to  display the Setting Page of the camera.
Note
You can also access the Setting Page from the Camera Management Tool. For details, please refer to “Camera Management Tool User  
Manual”.
The user authentication window is displayed.
The Setting Page is displayed.
Note
The Viewer is displayed when [Basic] > [Vie wer] > [General] > [Default Page] is set to [Display Viewer] in the setting menu (P.107).
Setting Menu
(1) [Viewer] Button
Start the Camera Viewer (P. 53).
(2) Language Switch Button Set the language to display on the screen.
(3) Setting Menus If you click one of these items, its submenu (P. 92) wi ll be displayed (excluding the [Memory Card] and [User 
Page] menus). Click a submenu to navigate to its Setting Page.
How to Use The Setting Page
1
Launch the web browser.
2Enter the IP address, and press the Enter key.
3Enter the Administrator Name and Administrator Password (P. 39) and click [OK].
(3)
(1)(2) 
						

							Setting Page
5
89
Common Setting Page Operations
This section explains basic Setting Page operations, and operations common to all Setting Pages.
Note
If you have enabled settings in your web browser to not display di alog boxes, you may be unable to perform operations on the Setting 
Page. If this happens, exit your web browser and launch it again.
 Applying Changes to Settings
If you change a setting on the Setting Pa ge, the [Apply] button on the upper right  or lower right of the screen is no 
longer grayed out and can be clicked.
Click [Apply] in this state to  apply the changed settings.
Click [Clear] to revert to  the previous settings.
Setting Changes Requiring Rebooting
Items that require the camera to be rebooted in order to  apply the changed settings are indicated with an orange 
symbol to their right.
When any item indicated with an orange  symbol is changed, [Apply] shown at the top right and bottom right of each 
Setting Page changes to [Apply and reboot].
Click [Apply and reboot] to apply the  changed settings and reboot the camera.
Click [Clear] to revert to  the previous settings.
Return to the Setting Menu
Click [Settings menu] at the top right of each  Setting Page to return to the setting menu.
Important
 If you open another window or tab to access the camera while  an authenticated web page is displayed, the authentication 
information of the displayed  web page may be discarded.
In this case, enter the authentication information again.
 To ensure security, exit the web browser after completing se ttings on the Setting Page and after using the Camera Viewer.
 Do not open multiple Setting Pages at one time  and try to change the settings of a single camera.
Important
Setting changes will be lost if you navigate to another Setting Page without clicking [Apply] or [Apply and reboot]. However, 
changes for [Camera Angle] and [Initial Setting] are saved even if you navigate to anothe r page without clicking [Apply], so click 
[Clear] if you want to discard those settings. Be sure to cl ick [Apply] or [Apply and reboot] to apply the changed settings.
Important
Do not use the [Back] or [Forward] buttons in the web browser to navigate Setting Pages. The changed settings may revert to the  
original settings or unwanted setting changes may be applied. 
						

							90
Help
Click   [Help] at the beginning of any setting item  to display a detailed explanation of that setting item.
Setting Ranges and Character Limits
For settings where you must enter numerical values or ch aracters, the setting range or limits on the number of 
characters will be displayed.
Please enter the settings within the displayed limits.
Operating the Video Display Area
Some Setting Pages such as [Initial Sett ing], [Panorama] and [Intelligent Functio n] can be configured using the video 
display area.
Note
 The displayed items will change depending on the Setting Page.
 Other users cannot access the Viewer while  video is being displayed on the Setting Page. Also, video cannot be displayed or co nfigured 
while the administrator is connected to the Viewer.
(1) Video Display Area
Camera video is displayed here. Use the mouse to set th e areas, etc. The operations on the video display area 
are the same as in the Viewer (P. 68).
(2) Pan/Tilt Slider Pan and tilt operations are the  same as in the viewer (P. 68).
M50R12R13
M50R12R13
(5)
(7)
(9) (8)
(1)(2) (3)(4)
(6)
(2)