Canon network camera VBM741 LE User Manual

Admin Tools
6
201
This tool captures the entire area that can be captured by the camera to create a panorama image.
The panorama image appears in the panorama display panel (P. 151) of the Admin  Viewer/VB Viewer and in the setting 
screen of the View Restriction Setting Tool (P. 206).
Create a Panorama Image
Once you have created and saved  a panorama image to the camera, it can be used by the tools.
Panorama Creation Tool
Important
If the privacy mask settings were changed using the Privacy Mask...

202
These settings will be applied at the panorama image capture start time and  will revert back to their previous 
settings once capture is completed.
(1) [Exposure Lock] The exposure for the selected position will be au tomatically adjusted and locked during capture.
(2) [White Balance Lock] The white balance for the selected position will be  automatically adjusted and locked during capture.
(3) [Focus Lock] The focus for the selected position will be automatical ly adjusted and locked for the entire...

Admin Tools
6
203
Recapture an entire panorama image:
Click [Start Panorama Creation] again.
The created panorama image will not appear in other tools yet.
A confirmation message will appear.
The panorama image is saved to the camera and appears in other tools.
4Click [Finish Panorama Creation].
5Click [Save to camera].
6Click [OK]. 

204
Delete a Panorama Image from the Camera
Delete a panorama image saved in the camera.The currently displayed panorama image is deleted.
A confirmation message will appear.
The panorama image saved in the camera is deleted.
Save/Load Panorama Image File
You can save recorded panorama images as image  files and open image files as panorama images.
Only JPEG images can be used.
S ave an Image File
1Click [Clear].
2Click [ Save to camera].
3Click [OK].
1Click [Save to file].
2Select the folder you want to...

Admin Tools
6
205
Load an Image File
3Click [Save].
1Click [Load from file].
2Select the image file you want to use from the dialog box that appears.
3Click [Open]. 

206
This tool limits the range that can be captured by the camera.
You can use this, for example, to limit zoom or the field of view to a certain range when publishing live video.
Scope of View Restriction  Settings 
Restrictions set by the View Restriction Sett ing Tool are applied in the following cases.
 When the Admin Viewer is accessed  with authorized user privileges.
 When the VB Viewer is accessed.
 When accessed via the Intelligent Function Setting Tool.
 When accessed via RM-Lite.
 For presets...

Admin Tools
6
207
Configure Settings With the P anorama Screen Preview Frame
Note
To delete view restriction settings, clear the [Apply  the view restriction] check box and click [Save settings].
(1) Pan/Tilt Preview Frame (Red Frame)
Displays the vertical and horizontal range the camera can move.
(2) Wide-Angle Preview Frame (Green Frame) Indicates the maximum wide-angle view possible within  the pan/tilt preview frame. You cannot change the 
aspect ratio.
(3) Telephoto Preview Frame (Yellow Frame)...

208
Load Position Information from Vid eo Display Area Camera Angle to 
Configure Settings
You can set the preview frame displayed on the panorama sc reen by loading position information from the actual 
video appearing in the video display area.
You can also enter values directly.
Note
If you have selected [Apply the view restriction] and leave any of  the setting values empty, the maximum view range will be set.
The imported view restriction is reflected in the value input box.
For more detailed...

Admin Tools
6
209
 If the view restriction will be exceeded as a result of zooming toward wide-angle, the camera will first pan and tilt to a position where the 
maximum wide-angle zoom will be within the viewing restriction area. Wide-angle zoom control will then be enabled within the view 
restriction area.
 Reducing the view restriction may also reduce the zoom range.
 Auto Flip and View  Restriction Settings
Under the following conditions, when the View Restriction Setting Tool is launched or...

210
Intelligent Function
The Intelligent Function records video, sends e-mail notifications, plays audio and starts other operations when it detects 
changes in the video due to subject movement.
The Intelligent Function has the following modes.
 Video Detection
 Auto Tracking 
 Audio Detection 
Intelligent Function Setting Tool Overview
R11R10
R11M 641M741
Notes on Use of This Camera
The Intelligent Function is not su itable for applications where high reliability  is required. If constant and maximum...