Canon network camera VBM720F User Manual

31
2
Initial Settings
When initial camera settings are complete, access the 
camera with the Camera Management Tool and check if 
video can be viewed properly.
Access the Top Page from Camera 
Management Tool
You can use the Camera Management Tool to launch the 
camera top page.
The web browser will start and the camera top page 
appears.
Note
 The web browser will not start when [Connection Status] for a 
camera is [Not connectable].
 You can also launch the camera top page by entering the IP 
address...

32
The factory default user name and password are:
User Name: root
Password: camera
The user name “root” is the administrator account for the 
camera.
Note
 Only administrators can connect to a camera using the Setting 
Page and Admin Tools.
 Authorized users with camera control privileges can also 
connect using Admin Viewer. You can set the user privileges of 
registered users with [Access Control] > [User Authority] on 
the Setting Page (p. 75).
 Depending on the security settings in Internet...

Access the Top Page of the Camera to Check Video
33
2
Initial Settings 

34 

Chapter 3
Camera Angle Setting 
Tool
    
❏Camera Angle Setting Method
❏Creating a Camera Specification File to Manage Multiple Cameras 

36
Use the Camera Angle Setting Tool to adjust the camera angle when installing the camera or to change the capture 
orientation according to the situation.
The following gives an overview of the settings that can be made with the Camera Angle Setting Tool.
Pan, Tilt, Rotation, Zoom, Image Flip, Focus
Zoom, Image Flip, Focus
Launching the Camera Angle Setting Tool
Note
You can also launch the Camera Angle Setting Tool from the 
Camera Management Tool. For details, please refer to the 
Camera Management...

Setting the Camera Angle
37
3
Camera Angle Setting Tool
Note
When the Camera Angle Setting Tool connects to a camera, the 
viewer and recording software connected to the camera 
(excluding RTP connections) are disconnected. 
A live camera image from the connected camera will 
be displayed and the camera angle can be set. 
Connecting with a Camera List
When using multiple cameras, the camera connection 
information already entered into the camera specification 
file can be read into the camera list used...

38
The camera specification file will be loaded and 
camera names listed will be displayed under [Camera 
List].
Note
 The [Select Camera] dialog box will remain open unless the 
Camera Angle Setting Tool is shut down or the X at the top 
right of the dialog box is clicked. 
 The camera list is discarded when the Camera Angle Setting 
Tool is shut down. Load the camera specification file the next 
time you launch the Camera Angle Setting Tool. 
„Connecting to the Camera
From the camera list, select the...

Setting the Camera Angle
39
3
Camera Angle Setting Tool
Disconnecting from the Camera, Shutting 
Down
1Click [Disconnect] from the [File] menu to disconnect 
the currently connected camera. 
2Click [Exit] from the [File] menu to shut down the 
Camera Angle Setting Tool. 
Important
Note that camera angle settings will be lost if you turn the 
camera on/off without performing the above steps. 

40
Display Screen of Camera Angle Setting Tool
 
(1) Video Display Area
The image captured by the camera is shown. 
(2) [Switch Screen Size] button
Switches the display screen size between large 
display and small display. The display screen size 
can also be selected from [Display Screen Size] from 
the [View] menu. 
(3) Control Assist
Displays dotted lines showing the range of pan 
operation and tilt operation. The camera angle cannot 
be changed to positions with no dotted lines. 
(4) [Pan] button...