Canon network camera VBM641VE User Manual

							Setting Page
4
61
Common Setting Page Operations
This section explains basic Setting Page operat ions, and operations common to all Setting Pages.
Applying Changes to Settings
When a setting is changed on the Setting Page, [Apply] show n on the top right and bottom right of the Setting Page 
changes from grayed-out to blue.
Click [Apply] in this state to  apply the changed settings.
Click [Clear] to revert to  the previous settings.
Setting Changes Requiring Rebooting
Items that require the camera to be rebooted in order to  apply the changed settings are indicated with an orange 
symbol to their right.
When any item indicated with an orange sym bol is changed, [Apply] shown at the top right and bottom right of each 
Setting Page changes to  [Apply and reboot].
Click [Apply and reboot] to apply the changed settings an d reboot the camera.
Click [Clear] to revert to  the previous settings.
Return to the Setting Menu
Click [Settings menu] at the top right of ea ch Setting Page to return to the top menu.
Help
Click   [Help] at the beginning of any setting item  to display a detailed explanation of that setting item.
Setting Ranges and  Character Limits
For settings where you enter numerical values or characters,  the setting range or character limits that can be entered 
will be displayed.
Please enter the settings  within the displayed limits.
Important
Setting changes will be lost if you navigate to another Setting Page  without clicking [Apply] or [Apply and reboot]. Be sure to click 
[Apply] or [Apply and reboot ] to apply the changed settings.
Important
Do not use the [Back] or [Forward] button in the web browser to navigate Setting Pages. The changed settings may revert to the 
original settings or unwanted setting changes may be applied. 
						

							62
About Each Setting Page
This section will give an overview of each item in Setting Menu and each list of submenus.
Each of the [Basic Settings], [Video and Audio]/[Video],  and [Video Record] menus has a [Video Settings] submenu, but 
the functions are all common. The functions can be set in any  of the menus and the settings will be reflected in all of the 
[Video Settings] submenus.
 Network (P. 64) Network settings for connecting to the camera.
 Password (P. 68)
Use this to change the administrator password from the 
default password.
 Date and Time (P. 69)
Camera date and time settings.
 Video  Settings (P. 72)
General video settings, such as the size and quality of 
video transmitted from the camera.
Basic 
Settings
Camera
Video and Audio 
R11M 641M741
Video R10M 640M740
Server  Camera 
Settings (P. 75)
Settings for the camera name and external input/output 
devices, and for camera use and installation settings.
 Setting (P. 79)
Sets initial settings, such as video quality compensation, at 
camera start up.
 Video  Settings (P. 72)
 SR (P. 82)
ADSR is an abbreviation for Area-specific Data Size 
Reduction.
Reduces the size of transmitted H.264 video by reducing 
the video quality of unspecified area.
 On-screen Display (P. 85)
Displays the date and time, camera name and other UI 
strings on the Viewer.
 Audio  Settings (P. 87) 
Settings for audio input from the microphone connected to 
the camera and audio output from the Viewer.
R11M 641M741
 Server  Settings (P. 89)
Settings for HTTP server, SNMP server, FTP server usage 
or WS-Security time checks.
 Video  Server (P. 91)
Settings for clients that can be connected to a video 
server.
 Audio  Server (P. 92) 
Settings for audio transmission  from the camera to the 
computer, and audio reception  from the computer to the 
camera.
 Server (P. 93)
Settings for RTP streaming.
R11M 641M741 
						

							Setting Page
4
63
 Video  Settings (P. 72)
 Upload (P. 96) Settings for uploading video via HTTP or FTP when an 
event is triggered.
 Memory Card (P. 101) Settings for recording video to a memory card when an 
event is triggered.
The settings of this item are the same as those of the 
[Memory Card] menu. The sett ings can be made with 
either of them.
 E-mail Notification (P. 102) Settings for sending an e-mail notification to a specified 
recipient when an event is triggered.
Video Record
Event
Security
Memory Card (P. 130)
Maintenance (P. 134)  External Device (P. 104) 
Operation settings for external device output and for 
external device input triggered events.
 Audio  Settings (P. 87) 
The settings of this item are  the same as those of [Video 
and Audio] > [Audio Settings].
 Audio Detection (P. 107) 
Detected changes in audio input from the microphone 
connected to the camera can trigger operations such as 
video recording or e-mail notification.
 The timer function can generate events that can trigger 
operations, such as video recording and e-mail 
notifications, at regular intervals.
 Switch Day/Night (P. 112)
The camera angle can be moved to preset positions when 
events cause Day Mode and Night Mode to switch.
 Linked Event (P. 113)  By linking two types of events, a single event is triggered.
R11M641M741
R11M 641M741
R11M 641M741
R11M 641M741
 User Restrictions (P. 118)
Used for adding new authorized users that can access the 
Admin Viewer, and for setting permissions for users.
 Host Restrictions (P. 119)
Separate access control from IPv4 and IPv6 addresses 
can be set.
 SS L/TL S (P. 121)
Certificate creation, administrative settings and encrypted 
communication settings.
 802.1X (P. 124)
Settings for 802.1X authentication and authentication 
status display, and for ce rtificate administration.

Settings for using IPsec.
Perform memory card operat ions or configure settings.
Check logs or settings, or perform camera maintenance.
User Page
Link to web page customized by the user.
For information on the User Page, contac t a Canon Customer Service Center. 
						

							64
Network settings for connecting to the camera.
LAN
Set the LAN communication method and size of video transmitted from the camera.
[LAN Interface]
Select the interface suited to the device for connecting to the camera. Generally use [Auto].
[Maximum Packet  Size]
Enter the maximum packet size to be transmitted by the camera. Normally there is no need to change the default setting of 
1500.
A setting of 1280 or greater is necessary when using IPv6.
When using ADSL, setting a slightly lower va lue may increase transmission efficiency.
IPv4
Settings for using IPv4 to connect to the camera. The IPv4 address can be a ssigned by the DHCP server automatically or 
set manually.
[IPv4 Address  Setting Method]
Select the method for setting the IPv4 address.
Configure Network Settings
[Basic Settings] > [Network]
Important
If any network settings are changed, the camera may become inaccessi ble from the active web browser. If this occurs, a confirmation 
dialog box will appear when you click [Apply] or [Apply  and reboot]. Click [OK] to apply the new settings.
If you reboot the camera after changing settings and cannot connect  to the camera from the web browser, any available URI for 
connecting to the camera will be displayed in a message. If  you cannot connect to the camera through the displayed URI, contact your 
system administrator.
Important
 Contact your System Administrator for the [IPv4 Address], [Subnet Mask] and [IPv4 Default Gateway Address] if you set the IPv4  
address manually.
 If any of the [IPv4 Address], [Subnet Mask] or [IPv4 Defaul t Gateway Address] settings are wrong, the camera may become 
inaccessible via the network. If this occurs, use the Camera Management Tool to reset the address (P. 36). 
						

							Setting Page
4
65
For [Manual], enter a fixed IPv4  address into [IPv4 Address].
For [Auto (DHCP)], the settings acquired from the DHCP server will be automatical ly entered in [IPv4 Address], [Subnet 
Mask] and [IPv4 Default Gateway Address].
[IPv4 Address]
When [IPv4 Address Setting Method] is set  to [Manual], enter a fixed IPv4 address.
The IP address cannot start wi th 127., such as 127.0.0.1.
[ Subnet Mask]
When [IPv4 Address Setting Method] is set to [Manual], ent er the designated subnet mask values for each network.
[IPv4 Default Gateway Address]
When [IPv4 Address Setting Method] is set to [Manual], enter  a default gateway IP address. Be sure to set this when 
connecting the camera to a different  subnet from that of the Viewer.
[AutoIP]
Select this to enable or disable AutoIP.
[IPv4 Address (AutoIP)]
When [AutoIP] is set to [E nable], an automatically set IPv4 address is displayed.
IPv6
Settings for using IPv6 to connect to the camera. The IP v6 address can be assigned by the RA or DHCPv6 server 
automatically or set manually.
[IPv6]
Select this to enable or disable IPv6.
[Auto (RA)]
Select [Enable] to set an address autom atically using RA (Router Advertisement, network information automatically 
transmitted from a router).
[Auto (DHCPv6)]
Select [Enable] to use DHCPv6 to set an address automatically.
Important
If [Auto (DHCP)] is selected as the IPv4 a ddress setting method, the IPv4 address may  not be assigned correctly in certain environments, 
such as when a router is  present between the DHCP server and the camera. If  this occurs, select [Manual] and enter a fixed IPv4 
address.
Important
Contact your System Administrator for the [IPv6 Address], [Prefix Length] and [IPv6 Default Gateway Address] if you set the IPv 6 address 
manually. 
						

							66
[IPv6 Address (Manual)]
Enter a fixed IPv6 address if you set the address manually.
[Prefix Length]
Enter a prefix length if [Disable] is specified in [Auto (RA)].
[IPv6 Default Gateway Address]
Enter a default gateway address if [Disable] is specified in [Aut o (RA)]. Be sure to set this when connecting the camera to a 
different subnet from that of the Viewer.
[IPv6 Address (Auto)]
If [Enable] is specified in [IPv6] and [Enable] is specified in [Auto (RA)] and  [Auto (DHCPv6)], then the automatically 
acquired address will be shown.
Note
In an environment where IPv6 cannot be used, and IPv6/Auto is set to [Enable], then only the link-l ocal address will be displayed in the 
[IPv6 Address (Auto)] field.
DNS
Set the DNS server address. The DNS server address can be  set manually or automatically assigned by a DHCP/DHCPv6 
server.
[Name  Server Address 1], [Name  Server Address 2]
Enter the name server address you want to register. To regist er only one address, keep the [Name Server Address 2] field 
blank.
You must set at least one if you manually  set the IPv4 address or IPv6 address.
Note
If [Name Server Address 1] is unavailable, [N ame Server Address 2] will be accessed. However, [Name Server Address 2] must be s et in 
advance.
[Auto- Setting of Name  Server Address]
Select the server to use for automatic ally setting the name server address.
To set [Use DHCP], select [Auto (DHCP)]  in [IPv4 Address Setting Method] (P. 64).
To set [Use DHCPv6], select [Enable] in [IPv6], then select [Enable] in [Auto (DHCPv6)] (P. 65).
[Name  Server Address (DHCP)]
Select [Use DHCP] or [Use DHCP/DHCPv6] in [Auto-Setting of  Name Server Address] to display the name server address 
acquired from the DHCP server.
[Name  Server Address (DHCPv6)]
Select [Use DHCPv6] or [Use DHCP/DHCPv6 ] in [Auto-Setting of Name Server Address] to display the name server 
address acquired from the DHCPv6 server. 
						

							Setting Page
4
67
[Host Name]
You can register the camera host name in  name server using alphanumeric characters.
Do not use “_” (underscore) in the hos t name in Internet Explorer 8/9/10/11.
[Host Name Registration with DDN S]
When you enter a name into [Host Name] and select [Enable] , the host name will be registered in the name server.
Registering the host name to DDNS is useful when operating with [IPv4 Address Setting Method] set to [Auto (DHCP)] 
(P. 64). DNS server registration settings  must be set in advance. Contact your system admini strator for the DNS server 
settings.
[ Search Domain]
Enter a domain name and click  [Add] to add the domain name to the Search Domain List.
Specify the host name without specifying a  domain name for a server, such as the upload server, to search domains in the 
form “host name + domain name”, where the domain names are specified in the Search Domain List.
Do not use “_” (underscore) in the doma in name in Internet Explorer 8/9/10/11.
[ Search Domain List]
A list of domain names added using [Search Domain].
The function queries the DNS server for each do main name starting from the top of the list.
Use the  ▲▼ buttons on the right to change the order of the domain names.
To delete a domain name, select one from the list and then click [Delete].
mDNS
This will configure settings for using multicast DNS. If you use mDNS,  the IP address and host name of the camera will be 
broadcast to other hosts on the network.
[Use mDN S]
Select this to enable or disable mDNS. 
						

							68
In order to prevent users, other than administrators, from changing the system, change the administrator password from the 
default password.
Administrator Password
Change the administrator password.
[Password]
Enter the administrator password in alphanumeric characters (spaces or printable characters).
The factory default setting is “camera”.
If the Admin Viewer, Admin Tools,  etc., are connected, terminate the c onnection before changing the password.
[Confirm Password]
Enter the same password as above for confirmation.
Set the Administrator Password
[Basic Settings] > [Password]
Important
 To ensure system security, be sure to change the admi nistrator password. Do not forget the new password.
 Press the reset switch to restore factory default settings if you have forgotten the administrator password (P. 270). Note, how ever, that 
this will reset all camera settings to factor y default settings except for date and time. 
						

							Setting Page
4
69
Camera date and time settings.
Current Date and Time
The date and time set in the camera are shown.
Setting
Set the date and time setting  method, time zone and daylight  saving time for the camera.
[ Setting Method]
Select the date and time setting method.
The settings are configured as follows depending  on the setting configured in [Setting Method].
[ Set manually] 
Set the desired date and time in [Date] and [Time].
Set the time in 24-hour format  in  order.
[ Synchronize with NTP server] 
Select the setting method displaye d in [Auto-Setting of NTP Server].
[Not used] 
Enter the IP address or host name of the NTP server in [NTP Server].
Set the Date/Time
[Basic Settings] > [Date and Time] 
						

							70
[Use DHCP]
The camera time is synchronized with the time of the NTP server at the address acquired from the DHCP server. The 
acquired NTP server address ap pears in [NTP Server (DHCP)].
In order to set [Use DHCP], you must change [Network] >  [IPv4] > [IPv4 Address Setting Method] to [Auto (DHCP)] 
(P. 64).
[Use DHCPv6]
The camera time is synchronized with the time of the NTP  server at the address acquired from the DHCPv6 server. 
The acquired NTP server address a ppears in [NTP Server (DHCPv6)].
In order to set [Use DHCPv6], you must change [Netwo rk] > [IPv6] > [Use IPv6] to [Enable], then set [Auto 
(DHCPv6)] to [Enable] (P. 65).
[Use DHCP/DHCPv6]
The camera time is synchronized with the time of the NTP se rver at the address acquired from the DHCP server or 
DHCPv6 server.
If the NTP server (address) can be acquired from both  the DHCP server (IPv4) and DHCPv6 server, the NTP server 
address acquired from the DHCP server (IPv4) will be used.
[ Synchronize with NTP broadcast] 
The camera will synchronize time with NTP br oadcasts received from the NTP server.
The camera’s NTP broadcast mode does not support IPv6.
[ Synchronize with computer time] 
The date and time will be synchronized with that of the comp uter currently accessing the camera. After clicking [Apply], 
[Setting Method] will change to [Set manually].
[Time Zone] is not automatically se lected, so set it if necessary.
Note
 If the NTP server IP address is incorrect  or a connection with the NTP server cannot  otherwise be established, the date and time will not 
be changed.