Canon network camera VBM641VE User Manual
Here you can view all the pages of manual Canon network camera VBM641VE User Manual. The Canon manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 31
Camera Setup 2 31 Depending on Windows or Internet Explorer security setting s, software or web browsers may be blocked from making camera settings or using the camera. Change or check security settings beforehand. Check Firewall Settings To use the Camera Management Tool on computers where Window s Firewall is enabled, you may need to register the Camera Management Tool as an application allowed to communicate via the firewall. Note Even if you do not perform the following steps, you can still...
Page 32
![Page 32
32
Register the Camera IP Address as a Trusted Site
In Internet Explorer 9 or later and Windows Server 2008/Windows Server 2012, Internet Explorer’s security level for Internet
and intranet sites is set to [High] by default.
As a result, it may be necessary to register the camera’s IP address as a trusted site to access the Admin Viewer/VB Viewer,
Setting Page or Admin Tools.
Note
Set the camera IP address with the Camera Management Tool (P. 37).
If you skip registration in this step, you can...](http://img.usermanuals.tech/thumb/14/1396/w300_network-camera-vbm641ve-1478296921_d-31.png "Page 32
32
Register the Camera IP Address as a Trusted Site
In Internet Explorer 9 or later and Windows Server 2008/Windows Server 2012, Internet Explorer’s security level for Internet
and intranet sites is set to [High] by default.
As a result, it may be necessary to register the camera’s IP address as a trusted site to access the Admin Viewer/VB Viewer,
Setting Page or Admin Tools.
Note
Set the camera IP address with the Camera Management Tool (P. 37).
If you skip registration in this step, you can...")
32 Register the Camera IP Address as a Trusted Site In Internet Explorer 9 or later and Windows Server 2008/Windows Server 2012, Internet Explorer’s security level for Internet and intranet sites is set to [High] by default. As a result, it may be necessary to register the camera’s IP address as a trusted site to access the Admin Viewer/VB Viewer, Setting Page or Admin Tools. Note Set the camera IP address with the Camera Management Tool (P. 37). If you skip registration in this step, you can...
Page 33
![Page 33
Camera Setup
2
33
The [Trusted sites] dialog box appears.
Note
Clear the [Require server verifica tion (https:) for all sites in this zone] check box if it is selected.
The camera’s IP address will be re gistered to the [Websites] list.
You can register IP addresses for multiple cameras by using a wildcard (*) when entering the IP address.
For example, if you enter “192.160. 1.*”, all cameras that share the “192.160.1” portion of the address will be registered as tr usted
sites.
Settings When Using...](http://img.usermanuals.tech/thumb/14/1396/w300_network-camera-vbm641ve-1478296921_d-32.png "Page 33
Camera Setup
2
33
The [Trusted sites] dialog box appears.
Note
Clear the [Require server verifica tion (https:) for all sites in this zone] check box if it is selected.
The camera’s IP address will be re gistered to the [Websites] list.
You can register IP addresses for multiple cameras by using a wildcard (*) when entering the IP address.
For example, if you enter “192.160. 1.*”, all cameras that share the “192.160.1” portion of the address will be registered as tr usted
sites.
Settings When Using...")
Camera Setup 2 33 The [Trusted sites] dialog box appears. Note Clear the [Require server verifica tion (https:) for all sites in this zone] check box if it is selected. The camera’s IP address will be re gistered to the [Websites] list. You can register IP addresses for multiple cameras by using a wildcard (*) when entering the IP address. For example, if you enter “192.160. 1.*”, all cameras that share the “192.160.1” portion of the address will be registered as tr usted sites. Settings When Using...
Page 34
34 Security Settings When Using an SSL Connection When an SSL connection to the camera is made from a web browser (Internet Explorer 9/10/11) in Windows Server 2008/Windows Server 2012, the follo wing operations may cause the display of the blocked content dialog box and prevent further operation. The launching of Admin Tools or Admin Viewer Audio reception from VB Viewer This occurs when Internet Explorer Enhanc ed Security Configuration (IE ESC) is enabled in Internet Explorer 9/10/11. Use the...
Page 35
![Page 35
Camera Setup
2
35
[Audio Service Not Running] dialog box appears.
The [Sound] dialog box appears.
If no audio device is installed, refer to your computer manual.
2Click [ Sound].
3Click [Yes].
4Click the [Playback] tab to confirm that an audio device has been installed.](http://img.usermanuals.tech/thumb/14/1396/w300_network-camera-vbm641ve-1478296921_d-34.png "Page 35
Camera Setup
2
35
[Audio Service Not Running] dialog box appears.
The [Sound] dialog box appears.
If no audio device is installed, refer to your computer manual.
2Click [ Sound].
3Click [Yes].
4Click the [Playback] tab to confirm that an audio device has been installed.")
Camera Setup 2 35 [Audio Service Not Running] dialog box appears. The [Sound] dialog box appears. If no audio device is installed, refer to your computer manual. 2Click [ Sound]. 3Click [Yes]. 4Click the [Playback] tab to confirm that an audio device has been installed.
Page 36
36 To use the camera, you must first set the network settings for the camera and then establish a network connection between the camera and a computer. Use Came ra Management Tool for these settings. This section will explain, in addition to network settings, how to set the camera name, the date and time and other settings. It will also explain how to use the Camera Management Tool to make initial camera settings. Note For details on using Camera Management Tool, pl ease refer to “Camera Management...
Page 37
![Page 37
Camera Setup
2
37
The [Basic Camera Settings] dialog box appears.
(1) [IPv4 Address Setting Method]
Select the method for setting the IPv4 address.
If [Manual] is selected, directly enter values that suit the environment in which the camera is used.
If [Auto (DHCP)] is selected, the value automatically acquired from the DHCP server will be entered in [IPv4
Address], [Subnet Mask] and [I Pv4 Default Gateway Address].
(2) [IPv4 Address] If you selected [IPv4 Addre ss Setting Method] > [Manual], enter...](http://img.usermanuals.tech/thumb/14/1396/w300_network-camera-vbm641ve-1478296921_d-36.png "Page 37
Camera Setup
2
37
The [Basic Camera Settings] dialog box appears.
(1) [IPv4 Address Setting Method]
Select the method for setting the IPv4 address.
If [Manual] is selected, directly enter values that suit the environment in which the camera is used.
If [Auto (DHCP)] is selected, the value automatically acquired from the DHCP server will be entered in [IPv4
Address], [Subnet Mask] and [I Pv4 Default Gateway Address].
(2) [IPv4 Address] If you selected [IPv4 Addre ss Setting Method] > [Manual], enter...")
Camera Setup 2 37 The [Basic Camera Settings] dialog box appears. (1) [IPv4 Address Setting Method] Select the method for setting the IPv4 address. If [Manual] is selected, directly enter values that suit the environment in which the camera is used. If [Auto (DHCP)] is selected, the value automatically acquired from the DHCP server will be entered in [IPv4 Address], [Subnet Mask] and [I Pv4 Default Gateway Address]. (2) [IPv4 Address] If you selected [IPv4 Addre ss Setting Method] > [Manual], enter...
Page 38
![Page 38
38
(5) [IPv4 Default Gateway Address]Be sure to set this if you select [IPv4 Address Setting Method] > [Ma nual] and connect to the camera with a
different subnet than that of the viewer.
(6) [AutoIP] Select this to enable or disable AutoIP.
(7) [IPv4 Address (AutoIP)] When [Enable] is selected for [AutoIP], an automatically set IPv4 address is displayed.
The camera will restart and the settings will take effect.
When you click [OK], other settings in ([Password], [Date and Time], [Camera], [Video])...](http://img.usermanuals.tech/thumb/14/1396/w300_network-camera-vbm641ve-1478296921_d-37.png "Page 38
38
(5) [IPv4 Default Gateway Address]Be sure to set this if you select [IPv4 Address Setting Method] > [Ma nual] and connect to the camera with a
different subnet than that of the viewer.
(6) [AutoIP] Select this to enable or disable AutoIP.
(7) [IPv4 Address (AutoIP)] When [Enable] is selected for [AutoIP], an automatically set IPv4 address is displayed.
The camera will restart and the settings will take effect.
When you click [OK], other settings in ([Password], [Date and Time], [Camera], [Video])...")
38 (5) [IPv4 Default Gateway Address]Be sure to set this if you select [IPv4 Address Setting Method] > [Ma nual] and connect to the camera with a different subnet than that of the viewer. (6) [AutoIP] Select this to enable or disable AutoIP. (7) [IPv4 Address (AutoIP)] When [Enable] is selected for [AutoIP], an automatically set IPv4 address is displayed. The camera will restart and the settings will take effect. When you click [OK], other settings in ([Password], [Date and Time], [Camera], [Video])...
Page 39
![Page 39
Camera Setup
2
39
Date and Time Settings
Click [Date and Time] and make settings such as the camera date and time setting method, time zone, and daylight
saving time.
For details on each item, please refer to “Setting” (P. 69) in “Set the Date/Time”.
Camera Name Setting
Click [Camera] and set the camera name di splayed in the viewers and other software.
For setting details, please refer to “Camera Name” (P. 75) in “Set General Camera Controls”.](http://img.usermanuals.tech/thumb/14/1396/w300_network-camera-vbm641ve-1478296921_d-38.png "Page 39
Camera Setup
2
39
Date and Time Settings
Click [Date and Time] and make settings such as the camera date and time setting method, time zone, and daylight
saving time.
For details on each item, please refer to “Setting” (P. 69) in “Set the Date/Time”.
Camera Name Setting
Click [Camera] and set the camera name di splayed in the viewers and other software.
For setting details, please refer to “Camera Name” (P. 75) in “Set General Camera Controls”.")
Camera Setup 2 39 Date and Time Settings Click [Date and Time] and make settings such as the camera date and time setting method, time zone, and daylight saving time. For details on each item, please refer to “Setting” (P. 69) in “Set the Date/Time”. Camera Name Setting Click [Camera] and set the camera name di splayed in the viewers and other software. For setting details, please refer to “Camera Name” (P. 75) in “Set General Camera Controls”.
Page 40
![Page 40
40
Video Settings
Click [Video] and configure the size and quality settings of the video transmitted from the camera.
For setting details, please refer to “Set Video Size and Quality [Basic Settings] > [Video Settings]” (P. 72).
Registering Camera’s IP Address to Trusted Sites
With Internet Explorer 9 or later and Windows Server 2008/Windows Server 2012, Internet Explorer’s security level for
Internet and intranet sites is set to [High] by default.
As a result, it may be necessary to register the...](http://img.usermanuals.tech/thumb/14/1396/w300_network-camera-vbm641ve-1478296921_d-39.png "Page 40
40
Video Settings
Click [Video] and configure the size and quality settings of the video transmitted from the camera.
For setting details, please refer to “Set Video Size and Quality [Basic Settings] > [Video Settings]” (P. 72).
Registering Camera’s IP Address to Trusted Sites
With Internet Explorer 9 or later and Windows Server 2008/Windows Server 2012, Internet Explorer’s security level for
Internet and intranet sites is set to [High] by default.
As a result, it may be necessary to register the...")
40 Video Settings Click [Video] and configure the size and quality settings of the video transmitted from the camera. For setting details, please refer to “Set Video Size and Quality [Basic Settings] > [Video Settings]” (P. 72). Registering Camera’s IP Address to Trusted Sites With Internet Explorer 9 or later and Windows Server 2008/Windows Server 2012, Internet Explorer’s security level for Internet and intranet sites is set to [High] by default. As a result, it may be necessary to register the...