Canon network camera VBM640VE User Manual

Admin Tools
6
231
Use a rectangle to specify the detection area (P. 219).
Note
The detection area is set to display within a rectangular area by default. It cannot be set to the edge of the video display area.
Set the size ratio of moving objects for the entire screen.
When the setting values or slider is changed, or the detection area is changed, an in dicator frame representing 
the object size is displayed for one s econd in the center of the video display area allowing you to check the size 
ratio...

232
For details on settings, please refer to “Configure Operations for Triggered Detection ([Event] Tab)” (P. 227).
The settings are saved to the camera.
If you keep control privileges, an ON event is trigge red as “detected” mode and the camera does not 
automatically track even when a subject is dete cted that meets tracking start conditions.
For the camera to automatically track moving obj ects, it is necessary to release control privileges.
Detection Status for Auto Tracking
All moving objects...

Admin Tools
6
233
Auto tracking will start to track the first detected moving object. While auto tracking, other moving objects will not be 
detected even if they satisf y [Tracking Start Conditions].
Auto Tracking Termination
Auto tracking will be terminated in the following cases.
 Camera control privileges for auto tracking were revoked due to the following conditions.
– The Admin Viewer obtained camera control privileges.
– The camera moved to a preset position due to the triggering  of a volume...

234
This explains functions common to both video detection and auto tracking.
Display Event Status
Click the [Event Display] button to open  the Event Display panel and confirm the detection status icon of the Intelligent 
Function.
This panel displays the same information as [Intelligent Function] in the Event Display pane l of the Admin Viewer (P. 184).
Note
If the detection setting is not saved in the camera, only the detection status for the currently  selected detection setting or auto tracking is...

Admin Tools
6
235
[Detection Settings of the  Same Type]
Show the detection areas/lines or detection results for the same type of detection settings as those selected in 
[Detection Setting List].
[Do not display]
No detection areas/lines or detection results are shown.
 Auto Tracking  
You can select [Display] / [Do not display] for  either [Detection Area] or [Detection Results].
Restart Intelligent Function
If the background video has changed while you were specifying settings or detection results...

236
This Viewer allows browsing the camera operation status logs recorded in the camera. You can also download the log from 
the camera and save the file.
Download Log Files
When you launch the Log Viewer, the latest log files will be aut omatically downloaded from the camera and displayed in a 
list.
If you want to load a log file from the memory card or ge t a new list of log files, follow the steps below to download.
The [Download] dialog box appears.
The logs in the camera memory or on th e memory...

Admin Tools
6
237
 [Camera (memory card)]: for the memory card
 File Name: for files saved on a computer
View Logs
The following information appears in the log.
[Code]
The log message code (P. 256).
The log code is shown together with one of three icons corresponding to the applicable level.
If the log has no log code, no icon is shown.
[Date & Time]
The date and time at which the log was generated.
[Message]
A message regarding the log.
Note
 In the Windows Control Panel, the decimal point in a value is...

238
Search for a Log
If the searched log is found,  it is shown as selected.
Click [Previous] or [Next] to search for the logs above  or below. Lines of logs found are shown as selected.
Show Filtered Logs
You can filter logs by type, code and date  and time to only show necessary information.
(1) [Log Type] [Not specified]
Logs will not be filtered.
[Specify type]
Select [Error], [Warning] or [Inf ormation] for the level if logs are filtered by their levels.
To use the module output by the log for...

Admin Tools
6
239
(2) [Date & Time][Specify start date & time]
When selected and a date and time are entered, logs  generated on or after the specified date and time are 
shown.
[ Specify end date & time]
When selected and a date and time are entered, logs  generated on or before the specified date and time 
are shown.
Only shows logs matching the specified conditions.
2Click [Apply filter]
Important
The logs saved in the camera will be deleted in the following cases. – When [Reboot] or [Restore Default...

240
This is a utility for browsing and managing video recorded on a memory card in serted in the camera. You can display a list 
of recorded video, and play back, delete and download video.
Use the Video List
 Video List Display Information
Note
If you click the header of each item, you can change the sort order (ascending or descending) for that item.
(1) [Date & Time]
Displays the date and time of a video recording.
(2) [Format] Displays the format of a recorded video ([JPEG] or [H.264]).
(3)...