Canon network camera VBH610D User Manual

							How to Operate the Viewer
131
Admin Viewer/VB Viewer
7
Controlling the Camera
Obtain camera control privileges before carrying out the 
following operations. These operations can be carried out 
in both the Admin Viewer and the VB Viewer. 
„Changing the Camera Angle
You can change the angle by doing one of the following:
Use the pan and tilt sliders
The camera angle will change according to the knob 
position on the sliders. The knob can also be moved by 
clicking on an empty part of the slider. 
Click on the image
Note
In the Admin Viewer, you can also control the pan and tilt with the 
camera control button (p. 139). 
„Change the Camera Angle in the Panorama 
Display Area
Move by clicking
Clicking a point in the panorama window moves the pan 
and tilt to center on that point. 
Move by dragging
Dragging the yellow frame lines in the panorama window 
moves the pan and tilt to capture that area. 
Note
 Operations carried out by clicking on the image will not be 
precise.
 Users operating the camera in the Admin Viewer with the 
administrator authorities can control the camera outside the 
view restrictions. 
Users operating the camera in the Admin Viewer with the 
authorized user authorities can control the camera only within 
the view restrictions. 
 Users operating the camera in the VB Viewer can control the 
camera within the view restrictions.
If another user is waiting for control privileges 
while you are assigned control privileges, 
your remaining time is shown on the control 
privilege status indicator.
Control privileges assigned 
(restricted time counting down) 
The control privilege status indicator is shown 
in blue. 
The [Obtain/Release Camera Control] button 
in the VB Viewer is blue in the center. 
The [Obtain/Release Camera Control] button 
in the Admin Viewer is yellow green in the 
center. 
Control privileges assigned
You can center on a point in 
the image by clicking on it. 
This slider is used to control 
the pan (horizontal 
movement) of the camera. This slider is used to control 
the tilt (vertical movement) 
of the camera. 
1Click the [Panorama Display] button.
2Change the camera angle in the panorama display 
area.
The frame lines within the display area show the 
image currently being captured by the camera. 
Blue frame lines mean that you do not have camera 
control privileges.
Yellow frame lines mean that you have camera 
control privileges. 
						

							132
„Changing the Camera Zoom Ratio
Move the knob on the slider up or down to zoom in or out
The camera zoom ratio will change according to the knob 
position on the slider. The knob can also be moved by 
clicking on an empty part of the slider. 
Note
 If [Digital Zoom] is set to [Enable] in [Camera] on the Setting 
page, the icon for the digital zoom telephoto end is displayed. 
(p. 53). 
 In the Admin Viewer, you can also control the zoom with the 
Camera Control button (p. 139). 
„Change the Zoom Ratio in the Panorama 
Display Area
You can change the zoom ratio by dragging the yellow 
frame lines in the panorama window and changing the 
size of the frame. The zoom ratio will adjust to capture 
the area in the changed frame. 
Note
Clicking outside the yellow frame lines and dragging will create 
blue frame lines. When you release the mouse button, the blue 
lines will turn yellow and the camera will change the pan, tilt and 
zoom in order to capture that area.
„Using the Preset/Home Position
You can control the camera using presets and home 
position registered in the camera beforehand (p. 96).
Click the preset selection box and select a preset from the 
displayed list to go to the selected preset camera angle.
Click the [Home Position] button to move the camera 
angle to the home position.
Note
Register presets and home position beforehand using the Preset 
Setting Tool (p. 98). Registered presets will appear in the preset 
selection box.
„Compensating Backlight
This control is effective when the image is dark due to 
backlight. 
Clicking [BLC] brightens images that are dark due to 
backlight. 
Clicking the button again cancels backlight 
compensation. 
Cropping and Displaying Part of an Image 
(Digital PTZ)
You can use the Digital PTZ panel to crop and display 
part of a camera image in the image display area. It is 
also possible to use a preset or home position registered 
to the camera.
„Digital PTZ
Digital PTZ is a function that facilitates simple panning, 
tilting, and zooming without changing the camera lens 
1Click the [Panorama Display] button.
2Change the zoom ratio in the panorama display area 
displayed.
Maximum telephoto digital 
zoom
(only when digital 
zoom is on)
Optical telephoto end
Slider for zoom
Move the knob upwards to 
zoom in (telephoto) 
Move the knob downwards 
to zoom out (wide-angle) 
Wide end
[Home Position] button
Preset selection box 
						

							How to Operate the Viewer
133
Admin Viewer/VB Viewer
7
position that was adjusted at the time of installation by 
transmitting just part of the camera effective pixel area 
(1920 x 1080) from the camera to the viewer.
Note
For details on how this function differs from Viewer PTZ, see 
p. 138.
„Opening the Digital PTZ Panel
Click the [Digital PTZ] button to display the Digital PTZ 
panel.
The appearance of the [Digital PTZ] button differs as 
follows depending on the state of the Digital PTZ function.
„Specifying a Cropping Range
Change the position and size of the preview frame on the 
Digital PTZ panel to specify the range to display in the 
image display area.
The preview frame is blue when you have not obtained 
camera control privileges. When you obtain camera 
control privileges, the preview frame turns yellow and you 
can use the following procedures to resize and move it.
„Changing the Size
You can resize the preview frame by dragging it. The 
preview frame turns blue during dragging. The image 
inside the frame is displayed in the image display area in 
accordance with the size of the frame.
Note
 The size of the preview frame can be changed to any of the 
five sizes 640 x 360, 512 x 288, 384 x 216, 256 x 144, and 128 
x 72, and the new size is displayed in [Image Size] on the 
Digital PTZ panel. The aspect ratio is always 16:9.
 If the size of the preview frame becomes larger than the 
display size specified in the display size setting of the viewer, 
the quality of the image in the image display area deteriorates.
„Changing the Position
You can move the preview frame by dragging the inside 
of the frame.
If you click any position in the Digital PTZ display area, the 
preview frame moves to the clicked position.
Note
The preview frame moves in stages. You cannot finely adjust the 
position.
„Specifying a Range with the Sliders
You can use the pan, tilt, and zoom sliders for the image 
display area to specify the cropping range in the image 
display area. The preview frame on the Digital PTZ panel 
also moves in accordance with the operation of the pan, 
tilt, and zoom sliders.
„Using a Preset or the Home Position
You can use a registered preset or home position to 
specify the range for Digital PTZ.
Click the preset selection box and select a preset from the 
displayed list to move the preview frame on the Digital 
PTZ panel to the preset position and display the image 
inside the frame in the image display area.
Click the [Home Position] button to move the preview 
frame on the Digital PTZ panel to the home position and 
Digital PTZ is disabled (displays the scene as seen by 
the camera).
Digital PTZ is enabled (displays trimmed video). 
						

							134
display the image inside the frame in the image display 
area.
Note
Register the preset or home position beforehand using the Preset 
Setting Tool (p. 98). Registered presets will appear in the preset 
selection box.
„Exiting Digital PTZ
Click the [Digital PTZ] button again. The Digital PTZ panel 
closes and Digital PTZ ends.
Although clicking the close button of the Digital PTZ panel 
closes the Digital PTZ panel, Digital PTZ will stay on.
Setting Video and Audio
„Changing the Video Size
You can set a desired video size for video received from 
the camera. Select from [320x240], [480x270], [960x540] 
or [1920x1080]. 
„Changing the Display Screen Size
You can change the display screen size. Select from [Actual 
Pixels], [480x270], [960x540], [1920x1080] or [Fit to 
Window]. 
[Actual Pixels] displays the video at the size at which it is 
being captured.
[Fit to Window] displays the video at the maximum size 
possible in the web browser window.
Note
 When the VB Viewer is launched, the video size set for the 
camera is applied.
When the Admin Viewer is launched for the first time, the camera 
settings are applied, but from then on settings from the previous 
time are used.
 When the viewer is launched, the display screen size opens at 
[Actual Pixels].
 Black bars will appear above and below the image if [Actual 
Pixels] is selected for the display screen size while the video 
size is set to [320x240].
„Displaying in Full Screen Mode
You can show images over the entire display. Clicking this 
button will switch the viewer to full screen mode.
To close the full screen window, select [Exit Full Screen 
Mode] in the following menu. 
You can display the necessary panels for controlling the 
camera in the full screen mode. Right-click on the screen 
and select the necessary panel from the menu that 
appears.
[Obtain/Release Camera Control]
Obtain and release the camera 
control privileges.
[Preset] Select a preset.
[Home Position] Move the camera angle to the 
home position.
[Panorama] Displays the panorama display 
panel. 
[Start/Exit Viewer PTZ]
The viewer PTZ panel is 
displayed. 
(Admin Viewer only)
[Start/Exit Digital PTZ]
The Digital PTZ panel is 
displayed.
[Control] Displays the camera control 
panel. 
[Pan/Tilt Slider] Displays the pan/tilt slider.
Admin ViewerVB Viewer
Admin ViewerVB Viewer 
						

							How to Operate the Viewer
135
Admin Viewer/VB Viewer
7
[Control for Admin] Displays the Control for Admin 
Panel (Admin Viewer only).
[Video Capture Size] Switch video capture size.
[Snapshot] Get a snapshot.
[Audio Reception] Receive audio.
[Audio Transmission] Transmit audio (Admin Viewer 
only).
[Event Display] Displays the event display panel 
(Admin Viewer only). 
[Start/Stop SD Card Recording]
Start and stop video recording to 
an SD memory card (Admin 
Viewer only).
[Exit Full Screen Mode] Exit full screen mode.
You can move any panel by clicking the title bar and 
dragging it to the desired position. 
„Getting a Snapshot
Captures a still image from live images and displays it in a 
new window.
You can also save still images. 
Click [Get a Snapshot] button at the moment you want to 
capture a still image. 
A snapshot panel will open showing a still image from the 
moment you clicked it. When the snapshot panel is open, 
click the [Get a Snapshot] button to update the image 
displayed in the snapshot panel.
To save a still image, right-click on it and select [Save 
Picture As] from the menu that appears. 
Enter the file name desired and save the image. 
„Reconnect
To reconnect the camera, click this button. 
Note
If you reconnect, audio reception will stop and camera control 
privileges will be lost. 
„Receiving Audio
You can receive audio through the microphone attached 
to the camera. 
Click this button to receive audio. 
Select the [Receive audio] checkbox in the Receive Audio 
panel that appears and use the slider to set an 
appropriate volume.
Note
 To receive audio, go to [Audio Server] in [Server] beforehand 
and set [Audio Transmission from the Camera] to [Enable] 
(p. 62). 
 The first time the Receive Audio panel is launched, a message to 
install the add-on “Canon Network Camera Audio Receiver” will be 
displayed in the information bar of the web browser. Install the add-
on.
 Regardless whether or not the Receive Audio panel is open, audio 
will always be received if the [Receive audio] checkbox is selected 
in the Receive Audio panel.
Checking Information
Admin ViewerVB Viewer
Admin ViewerVB Viewer 
						

							136
The following icons will appear depending on the content 
of the information displayed.
Note
For details on the messages, see “List of Viewer Messages” 
(p. 162). 
Icon (color)MeaningDescription
(Blue) InformationAppears when a camera 
operation has been successful. 
The following information 
appears.
 Help messages, such for each 
button and pull down menu
 Frame rate information
 Pan, tilt, zoom camera 
information, image 
stabilization information
 Pan, tilt, and 
zoom information for Digital 
PTZ
(Yellow) WarningA message will appear notifying 
the user when camera control 
privileges cannot be obtained, 
audio reception stops, etc.
(Orange) ErrorAppears when a system error 
occurs.
Important
If the image stabilizer function is turned on in the setting page 
(p. 53), the actual viewing angle of the image will be smaller 
than the viewing angle displayed in the information field (For 
On1: approx. 83%; for On2: approx. 50%). 
Also, the viewing angle of image display becomes smaller than 
the angle (frame) displayed in the panorama display area.  
						

							137
7
Admin Viewer/VB Viewer
The operations and settings that can be performed only in the Admin Viewer are explained. 
Transmitting Audio
In the Admin Viewer, you can transmit audio via an 
external device connected to the camera.
Click this button to transmit audio.
Use the slider to set an appropriate volume on the Send 
Audio panel that appears.
In the [Audio sending time limit], select [No Limit], [1 
min(s)], [5 min(s)] or [10 min(s)].
Note
The first time the Send Audio panel is launched, a message to 
install the add-on “Canon Network Camera Audio Receiver” will 
be displayed in the information bar of the web browser. Install the 
add-on.
Magnifying Part of the Image (Viewer 
PTZ)
You can use the Viewer PTZ panel to magnify part of the 
camera’s image in the image display area. 
„Viewer PTZ
Viewer PTZ uses the digital zoom function to enlarge part 
of a video without using the camera pan, tilt or zoom 
functions.
This function allows you to enlarge part of a video when 
using the camera in a locked position, for example, during 
use of an intelligent function.
Note
 Video cropped with Viewer PTZ will not be videos recorded 
manually, or by event or timer. The cropped position in the image display area will be 
reflected in full screen mode as well.
„Opening the Viewer PTZ Panel
Click the [Viewer PTZ] button to display the viewer PTZ 
panel.
The initial status of the Viewer PTZ panel shows the 
preview frame (yellow) occupying the entire image.
Performing Operations and Settings in the Admin Viewer
Important
When the Viewer PTZ function is used, you cannot operate the 
camera by clicking the image display area.
Preview Frame
(Magnified display area)
Center of preview 
frame 
						

							138
„Adjusting the Preview Frame Size
Drag the preview frame line to make the frame smaller, 
and a magnified view of the image in the frame will be 
shown in the image display area.
The preview frame turns blue when you drag it. 
Note
 The aspect ratio of the preview frame is always 16:9.
 The Viewer PTZ uses digital zoom, so the higher the digital 
zoom ratio, the lower the quality of the image becomes.
„Moving the Preview Frame
You can move the preview frame to the desired position.
Move by dragging
Click within the preview frame and drag it over the subject 
that you want to see magnified.
The preview frame turns blue when you drag it. 
Move by clicking
Click a position outside of the preview frame and the 
preview frame will move to that position. Click the subject 
that you want to see magnified.
Move using sliders
When you have obtained control privileges, you can pan, 
tilt and zoom the displayed video using sliders.
Note
After changing the preview frame, the image display area will 
continue to display the cropped video corresponding to the 
preview frame even after the Viewer PTZ panel is closed. 
However, when you reconnect to Admin Viewer, the initial status 
will be restored.
„Exiting Viewer PTZ
Click the [Viewer PTZ] button again. The Viewer PTZ 
panel closes and Viewer PTZ is exited. 
Although clicking the close button of the Viewer PTZ panel 
closes the PTZ panel, the Viewer PTZ will stay on.
„Differences Between Viewer PTZ and Digital 
PTZ
Viewer PTZ and Digital PTZ are both simple pan, tilt, and 
zoom functions that use the digital zoom function, but they 
have the following differences because they employ 
different operating principles.
Using Control for Admin
When you have obtained control privileges, click the 
[Control for Admin] button to display the Control for Admin 
Panel and perform camera operation and video settings.
Viewer PTZDigital PTZ 
Enlarges the specified part of 
the image transmitted from 
the camera and then displays 
it in the viewer.Transmits only the trimmed 
part of the entire area that can 
be captured by the camera.
The size of the received data 
is large.The size of the received data 
is small.
Can be used only in Admin 
Viewer.Can be used in both Admin 
Viewer and VB Viewer.
Not necessary to obtain the 
camera control privileges.Necessary to obtain the 
camera control privileges.
PTZ operation can be 
performed independently for 
each viewer.Independent operation cannot 
be performed for each viewer 
(if multiple viewers are 
connected and Digital PTZ is 
used for one of them, the 
same Digital PTZ display is 
also applied in the other 
viewers). 
						

							Performing Operations and Settings in the Admin Viewer
139
Admin Viewer/VB Viewer
7
„Opening/Closing Control Items
Clicking the title of a control item will open or close it.
You can open the various control items even without 
obtaining the camera control privileges, but all items other 
than [Frame Rate] will be grayed out.
„Performing Operations and Settings
Click the camera control buttons to set the pan, tilt and 
zoom operations as well as the speed. 
(1) [Pan/Tilt] button
Move pan and tilt in the direction of the arrows. 
Operation will continue as long as you are holding 
down the button and will stop when you release it. 
Clicking the center button will make the camera face 
straight forwards. 
(2) [Zoom] button
Zooms in or out. Operation will continue as long as 
you are holding down the button and will stop when 
you release it. 
(3) [Pan/Tilt] Speed
Select a speed from [Fast], [Normal] and [Slow]. 
(4) [Zoom] Speed
Set the speed to [Fast] or [Slow]. 
Note
Changing the [Pan/Tilt] speed or [Zoom] speed will not change 
the speed of the slider, or of the pan, tilt or zoom in panorama. 
„Setting the Smart Shade Control
The smart shade control function differs from backlight 
compensation in that only dark areas are brightened while 
bright areas are kept intact. 
(1) [Smart Shade Control]
Set to [Off] or [On]. 
(2) Adjusting the Smart Shade Control
When smart shade control is [On], set one of the 7 
levels from [1] (Mild) to [7] (Strong).
Example: If the background is bright and the subject 
is hard to see, this function brightens dark areas to 
make the subject clearer. 
In comparison to backlight compensation, smart 
shade control can reduce overexposure of bright 
areas. 
Note
 When [On] is selected for smart shade control, the image file 
size increases. 
 When [On] is selected for smart shade control, screen noise 
may increase. If noise is noticeable, lower the control level.
„Setting the Focus
[Auto]  : Automatically focuses on the 
subject.
[Manual] : You can adjust the focus manually 
by pushing the  (far) and 
(near) buttons. 
Clicking [One-shot AF] will use 
autofocus to focus on a subject and 
then stop in manual focus.
⇔
(1)
(2)(3)
(4)
(1)
(2)
OFFSmart Shade 
ControlBLC (Back Light 
Compensation) 
						

							140
[Fixed at Infinity] : You can set the focus so that it is 
fixed near infinity. 
„Setting the Exposure
(1) Exposure Mode
Select from [Auto], [Manual], [Auto (Flickerless)] or 
[Auto (Shutter-priority AE)]. 
If [Auto] is selected for [Day/Night] under [Camera] in 
the Setting page (p. 53), select [Auto ], [Auto 
(Flickerless)] or [Auto (Shutter-priority AE)]. 
[Auto]
The exposure is controlled automatically.
[Manual]
The exposure is set by adjusting the shutter speed, 
aperture and gain values manually.[Auto (Flickerless)]
In this mode, video flickering caused by fluorescent 
lights, etc., can be reduced. The shutter speed is 
automatically adjusted according to the brightness 
of the environment in which the camera is used.
[Auto (Shutter-priority AE)]
In this mode, the desired shutter speed can be 
specified.
(2) [Exposure Compensation]
When [Auto], [Auto (Flickerless)] or [Auto (Shutter-
priority AE)] is selected for [Exposure], the exposure 
compensation value desired can be selected from 
nine levels (-4 to +4) using the slider. 
To darken the image, select a negative value. To 
brighten the image, select a positive value. 
(3) [Metering Mode]
When [Auto], [Auto (Flickerless)] or [Auto (Shutter-
priority AE)] is selected for [Exposure], the metering 
mode can be selected from [Center-Weighted], 
[Average] or [Spot]. 
For an explanation on each item set in [Metering 
Mode], see [Metering Mode] in the Setting page 
(p. 51).
(4) [Shutter Speed] 
When [Manual] or [Auto (Shutter-priority AE)] is 
selected for [Exposure], select the shutter speed 
desired. If [Manual] is selected, set the shutter speed 
in the range of [1/1 sec] to [1/16000 sec] from a pull-
down menu. If [Auto (Shutter-priority AE)] is selected, 
set the shutter speed in the range of [1/2 sec] to 
[1/16000 sec] from a pull-down menu.
When capturing a moving subject, selecting a higher 
shutter speed can reduce blurry video capture.
(5) [Aperture] 
If [Manual] is selected for [Exposure], set a desired 
aperture value. 
Moving the slider to the left closes the aperture and 
darkens the image. Moving the slider to the right 
opens the aperture and brightens the image. 
(6) [Gain] 
If [Manual] is selected for [Exposure], set a desired 
gain value. 
Moving the slider to the left decreases the gain 
(sensitivity to brightness) and darkens the image. 
Moving the slider to the right increases the gain and 
brightens the image.
Important
 If it is set in the Admin Viewer, the same focus mode will 
occur in the viewers of other users also. 
 Depending on the lighting used, focus may not be 
maintained when switching between [Day Mode] and [Night 
Mode]. Focus when switching Day/Night Mode can be set in 
the [Day/Night Mode Focus Settings] panel in the Admin 
Viewer (p. 141).
 Setting the shutter speed at [1/1 sec] in manual exposure 
(p. 140) will disable the [Auto] and [One-shot AF] focus 
modes in Control for Admin. Switch the focus to [Manual] and 
adjust it to your subject. 
 Refer to the following for focus ranges.
 Notes on p. 52
   Notes on p. 38
 Changes to focus mode in the Admin Viewer will not be 
reflected in the settings on the setting page. 
 Note that if you set the focus manually it will remain fixed.
(1)
(2)
(3)
(4)