Canon network camera VBH43 User Manual

Detecting/Setting Cameras
2
21
Note
Thumbnails can only be displayed for cameras with [Connectable] or [Connectable (error)] displayed for [Connection Status]. 
Thumbnails cannot be displayed when the camera is cr eating a panorama image or setting the camera angle.
Searching in the Camera List
Filters the cameras displayed in the camera list by a string such as the IP address or connection status.
(1) [Filter] You can enter up to 1024 character s as a string to be searched.
If you want to search more...

22
You can click the checkbox at the beginning of the line or choose the camera names using the Ctrl key or Shift key to 
select multiple cameras.
Changing the Camera List Order
Each click of each item title of the camera list swit ches the list to ascending order or descending order.
You can click title items and drag them to the desired loca tion to change the right and left orders of the displayed 
items.
 Changing the Items to Display
You can select items in the camera list, and change their...

Detecting/Setting Cameras
2
23
Note
 You can enter up to 259 characters in each of the [Notes] or [Group Name] input fields.
 [Group Name] is not displayed by default. To set the group name, select [Group Name] to display in the list in [Display Items 
Settings] (P. 22).
 Even if the [Notes] or [Group Name] fields are entered, in the following cases, the entered details will not appear in the camera list  when launched the next time.– If the camera specification file has not been saved after  the [Notes]...

24
Those cameras (P. 16) that could not be authenticated with the common authentication information at the time of camera 
search can be authenticated later. You can  either use common authentication information or specify administrator name 
and administrator password individually.
Setting Common Authentication Information
Set the common authentication information for cameras.  Common authentication information is the information 
(administrator name and administrator password) required  for...

Detecting/Setting Cameras
2
25
Authenticating a Detected Camera
Cameras with the [Connection Status] set to [Authentication required] or [Not connectable] in the camera list require 
authentication. Camera settings cannot be configured  in this tool until the authentication is completed.
The [Camera Authentication] dialog box is displayed.
(1) [Administrator Name] Enter the administrator name for the camera. This is gr ayed out and cannot be entered if [Authenticate using 
common authentication info...

26
Basic camera settings can be configured, including camera network settings (IP address), changing the administrator 
password, camera name, date and time, and  video settings for detected cameras.
Because basic settings are common to all models, you can  apply the same settings to multiple cameras in a batch.
Note
 Because [Basic Camera Settings] are applied to part of the came ra’s [Setting Page], the camera’s [Setting Page] details change when 
[Basic Camera Settings] are changed.
 Some of the...

Detecting/Setting Cameras
2
27
Note
The setting fields of some setting items can be left blank. In that case, the camera settings are not changed and are left set  to their 
original values.
Note
Depending on the [Video] category’s [Video Size Set] and items  in the [Network] category, the progress bar appears and the 
camera automatically restarts after changin g settings and clicking [OK]. When the message [Setup has been completed. Wait for 
the camera to restart] appears, click [OK].
The [Connection...

28
(2) [IPv4 Address]When [IPv4 Address Setting Method] is  [Manual], enter a fixed IPv4 address.
When basic settings are configured for multiple cameras,  the following specification characters can be used to 
specify a wildcard IPv4 ad dress or specify a range.
(3) [Subnet Mask] When [IPv4 Address Setting Method] is [Manual], enter  the subnet mask value designated for the corresponding 
network.
(4) [IPv4 Default Gateway Address] When [IPv4 Address Setting Method] is [Manual] and the camera will...

Detecting/Setting Cameras
2
29
Admin Account
Change the administrator name and administrator password.
(1) [Administrator Name]
Change the administrator name. The administrator name ma y be grayed out and unable to be changed for some 
camera models.
(2) [Administrator Password] Enter ASCII characters (space or printable  characters) for the administrator password.
(3) [Confirm Administrator Password] Enter the same password as above for confirmation.
Important
 Change the administrator password...

30
Date and Time
(1) [Setting Method]
Select the setting method for the date and time.
(2) [Date], [Time] Configure the settings as follows in accordance with the [Setting Method] setting.
When [Set manually] is selected
Set the desired date and time.
Set the time in 24-hour format in  order.
When [Set manually] is selected and [Synch ronize with computer time] is selected
Synchronizes the date and time with the comp uter that is currently accessing the camera.
[Time Zone] is not selected automatically...