Canon network camera VBC50Fi User Manual

							
3-19
Basic Settings
Setting Up the HTTP, Camera and Audio Servers (Server)
Audio Reception
• Output Volume
• Echo Canceller
Note
●Use the Multi-Terminal Module ( → P.1-11) when connecting a microphone* or
speaker to the VB-C50FSi.
● Setting “Noise Canceller”, “Slope Filter”, and “Echo Canc\
eller” to “ON” may have
an effect on the audio volume and quality. Set “ON” or “OFF”\
 according to the
environment where you install and how you use the VB-C50FSi.*
● When sending or 
receiving audio*, please read carefully “Usage Notice of Audio”
( →  P.iii).
● Use the VB Administration Tools to view or modify the settings for Audio\
 Playback
and 
recording*.
*
 Only available with a particular model ( → P.iii)
6 “Audio Reception”
Set “Audio Reception” to “Used” to receive audio which has b\
een sent from the Admin Viewer
and output to the speaker with amp connected to the Multi-Terminal Modul\
e ( → P.1-11).
7 “Output Volume”
Set the volume of output audio in a range from 1-100. The larger the num\
eric value, the louder
the audio will be.
8 “Echo Canceller”
Set “Echo Canceller” to “ON” to prevent acoustic echo when t\
ransmitting and receiving audio
from the speaker with amp and microphone connected to the Multi-Terminal\
 Module ( → P.1-
11).
VB-C50FSi
C
O
P
Y  
						

							
3-20
Setting User Access Privileges (Access Control)
You can perform the following settings with Access Control.
●
Authorized User Account: Register users who may connect to the VB-C50FSi\
/VB-C50Fi.
● Authorized/Restricted Host Specification: Control whether a specific hos\
t is to have
access or not.
When you have made changes to the settings, click the “OK” button \
to return to the
Settings Title Page. If you do not make any changes, click the “Cance\
l” button.
Authorized User Account
1 “User List”
Only users registered in this list are permitted to connect to the VB-C5\
0FSi/VB-C50Fi. You can
register a maximum of 50 users in addition to the user name (root). “Delete”Select a user from the User List and click the delete button to remove t\
he user from the list.
“Add” / “Change” You can add authorized users to the User List by entering their account
names and passwords and then clicking the [Add] button.The [Add] button
changes to [Change] when you select an authorized user. You can change
the password by entering a new password, and then clicking the [Change] \
button.
2 “Access permitted to listed users only”
When this option is checked, only users registered in the User List are \
permitted to connect to
the VB-C50FSi/VB-C50Fi.
● Access using the Viewer Ver.3.1 or before and WebView Livescope MV Ver.1\
.0 is prohibited.
3
“Audio Transmission permitted to listed users only” (VB-C50FSi on\
ly)* When this option is checked, only users registered in the User List are \
permitted to receive audio.
* Only displayed with a particular model ( → P.iii)
1
2
3
4
* VB-C50FSi screen
C
O
P
Y  
						

							
3-21
Basic Settings
Authorized/Restricted Host Specification
Note
●If you do not make a Host List, access is permitted to any hosts.
● If the Host List provided prohibits access for all hosts, the Host Restr\
iction function
is disabled and access is permitted to all hosts.
● To prohibit access over HTTP connection via a proxy server, the address \
of the
proxy server should be set.
● When you set a host list which leads to prohibit yourself, restore the f\
actory default
settings.
Setting User Access Privileges (Access Control)
1 “Host List”
In this Host List, you can in detail whether of how access from the host\
s is permitted or denied.
See the next page for the description format.
2 “Apply this list to HTTP server”
When this is selected, the Host List is applied to the host that can acc\
ess the HTTP server. In
this case, control extends also to the Viewer for Java, etc. Use this wh\
en you want to restrict
access not only from the viewer but also to the Web page.
3 “Apply this list to Video Transmission”
Select to apply the Host List to a host who may have access to the VB-C50FSi/VB-C50Fi. Use
“Apply this list to Video Transmission” if you want to restrict ac\
cess from the Viewer for Java and
Viewer for PC etc.
4“Apply this list to Audio Transmission” (VB-C50FSi only)* When this is selected, the Host List is applied to the host that can rec\
eive audio.
* Only displayed with a particular model ( → P.iii)
5 “Apply this list to Still Image Capture”
When this is selected, the Host List is applied to the host that can cap\
ture still images. 1
2
3
4
4
“Still Image Capture permitted to listed users only”
When this option is checked, only users registered in the User List are \
permitted to capture still
images.
It is useful when distributing video as a still picture ( → P.5-24).
5
* VB-C50FSi screen
C
O
P
Y  
						

							
3-22
Tip
The Host Restriction function applies to hosts running client applicatio\
ns such as
viewer. Access restrictions are imposed using a list made up of one or m\
ore entries
written using the format described below.
Listing Format
[!] addr [-addr2]
●“addr” is written in standard IP address format.
● Because the IP addresses in the “addr” and “addr2” parameter\
s define the range
of IP addresses, if an IP address A is higher than “addr” and lowe\
r than “addr2”, A
is included in the addr-addr2 range. The addr2 parameter can be omitted,\
 in which
case it is taken to be the same value as addr.
●
For a host IP address A for which access permission is to be authorized \
or restricted,
the first entry that includes A is requested from the top of the list of\
 authorized/restricted
hosts. If the entry obtained begins with “!”, access is denied. If\
 not, access is authorized.
● Redundant or contradictory entries included in the list are automaticall\
y deleted.
● If the given address does not belong to any of the entries, access is au\
thorized.
Listing Guidelines
If the list of authorized and restricted hosts contains an error, access\
 that was originally
permitted may subsequently be denied. To avoid this problem, compile the\
 lists very
carefully using the examples below as a guide.
Example 1: To prohibit access from a host
!172.20.0.0
Access from the host with an IP address of 172.20.0.0 is prohibited.
Example 2: To prohibit access from hosts in a given address range
!172.20.0.0-172.20.0.20
Access from hosts with IP addresses from 172.20.0.0 to 172.20.0.20 is pr\
ohibited.
Example 3: To authorize access from hosts in a given address range while\
prohibiting access from other hosts
172.20.0.10-172.20.0.12
!0.0.0.0-255.255.255.0
Access is only authorized from hosts with IP addresses from 172.20.0.10 \
to
172.20.0.12.
Example 4: To prohibit access from hosts in a given address range while
permitting access from one host within that range
172.20.0.10
!172.20.0.0-172.20.0.20
Access from hosts with IP addresses from 172.20.0.0 to 172.20.0.20 is pr\
ohibited,
except for the host at 172.20.0.10, from which access is permitted.
Example 5: To prohibit access from hosts in a given address range while
permitting access from a range of hosts within that range
172.20.0.10-172.20.0.15
!172.20.0.0-172.20.0.20
Access from hosts with IP addresses from 172.20.0.0 to 172.20.0.20 is pr\
ohibited,
except for the hosts with addresses between 172.20.0.10 and 172.20.0.15,\
 from which
access is permitted.
Setting User Access Privileges (Access Control)
C
O
P
Y  
						

							
3-23
Basic Settings
Setting the Date and Time (Date and Time)
You can perform the following settings with Date and Time.
●Current Camera Time: Displays the time set up for the camera.
● New Camera Time: For setting up the time on the VB-C50FSi/VB-C50Fi.
● Time Zone: Select the appropriate time zone from the list.
When you have made changes to the settings, click the “OK” button \
to return to the
Settings Title Page. If you do not make any changes, click the “Cance\
l” button.
Current Camera Time
1
2
1 “Date” and “Time”
Display the date and time currently set on the VB-C50FSi/VB-C50Fi.
2 “Time Zone”
The time difference with Greenwich Mean Time is displayed.
C
O
P
Y  
						

							
3-24
New Camera Time
1
2 3
Time Zone
1
Tip
Even if you have selected “Synchronize with NTP server”, the date \
and time will not
change if the VB-C50FSi/VB-C50Fi cannot connect with the NTP server, for\
 example,
because the IP address for the NTP server is not correct.
Setting the Date and Time (Date and Time)
1 “Synchronize with computer time”
Set to the date and time of the PC currently accessing the VB-C50FSi/VB-\
C50Fi via a Web
browser.
2 “Set manually”
Select this item when the date and time are to be manually entered. In t\
he Date field, enter the
year, month and day in yyyy-mm-dd format; in the Time field, enter the t\
ime in hh:mm:ss 24-
hour format.
For example, for January 23, 2004, 1:23:04 p.m., enter “2004/01/23”\
 and “13:23:04”.
3 “Synchronize with NTP server”
Set to the date and time of the NTP server when the IP address of an NTP\
 server has been
entered.
1 “Time Zone”
Select the time difference with Greenwich Mean Time from the list.
C
O
P
Y  
						

							
3-25
Basic Settings
You can perform the following settings with Miscellaneous.
●DNS: Register the Name Server Address and Host Name for registering host\
 names
such as Mail Server Host.
● Mail: For setting up the mail addresses which are to receive recorded pi\
ctures and
log messages.
● External Device Names: For setting up the names for the external devices\
 to be
used with VK-64 etc.
● LED: For setting the LED on the VB-C50FSi/VB-C50Fi to turn on or off.
When you have made changes to the settings, click the “OK” button \
to return to the
Settings Title Page. If you do not make any changes, click the “Cance\
l” button.
Setting Up Name Server Address and Mail etc. (Miscellaneous)
DNS
1
2
Tip
If you are operating the VB-C50FSi/VB-C50Fi with “Auto Setting (DHCP\
)” ( → P.3-6),
it is useful to register the “Register Host Name” setting. Setting\
s are required before
being able to register in the DNS server. For information about DNS serv\
er settings,
please consult your system administrator.
1
“Name Server Address 1-2”
Enter the name server address you want to register. If you are only regi\
stering one, leave the
field “Name Server Address 2” blank.
2 “Register Host Name”
Select and enter the host name you want to register. You can register a \
host name in “Name
Server Address 1”.
C
O
P
Y  
						

							
3-26
Mail
1
3
5
2
4
6
Setting Up Name Server Address and Mail etc. (Miscellaneous)
1“Mail Server Host”
Specify the SMTP server.
2 “Sender’s (From) Mail Address”
Specify the mail sender.
3 “Recipient (To) Mail Address”
Specify the mail recipient.
4 “POP before SMTP”
Select if the mail host server requires POP user authentication.
5 “User Name” and “Password”
Specify the settings in “User Name” and “Password” necessary\
 for authentication.
6 “POP Server”
Specify the POP server.
C
O
P
Y  
						

							
3-27
Basic Settings
External Device Names
1
2
LED
1
Setting Up Name Server Address and Mail etc. (Miscellaneous)
1“External Input Device 1-2”
“Device Name”
To distinguish between the different external devices connected to the M\
ulti-Terminal Module,
be sure to enter a device name. Enter a device name consisting of up to \
15 alphanumeric
characters.
2 “External Output Device 1-3”
“Device Name”
To distinguish between the different external devices connected to the M\
ulti-Terminal Module,
be sure to enter a device name. Enter a device name consisting of up to \
15 alphanumeric
characters.
1 “LED Setting”
Select the status of the LED located on the front of the camera from “\
Blinks during
Communication”, “Steady Green LED”, “Steady Orange LED”, \
“Steady Red LED” and “Turn
the LED OFF”. If the image is obstructed by the reflected LED, select\
 “Turn the LED OFF”.
C
O
P
Y  
						

							
3-28
You can use the following items with the Administration Tools.
● On-board File System Information: Displays the status of VB-C50FSi/VB-C5\
0Fi’s
memory.
● Recorded Picture and 
Audio data* Information and Manipulation: Displays the status
of pictures and 
audio* recorded in the VB-C50FSi/VB-C50Fi and deletes recorded
pictures and 
audio*.
* Only available with a particular model of the VB-C50FSi ( → P.iii)
●Miscellaneous: Confirm settings for the VB-C50FSi/VB-C50Fi and initializ\
ation.
If you do not make any changes, click the “Cancel” button.
Using the Administration Tools (Administration Tools)
On-board File System Information
1 “On-board File System Information”
The On-board File System displays the used space, free space and capacit\
y (used space +
free space) of VB-C50FSi/VB-C50Fi’s memory in bytes. 1
Tip
●
Since the work area for the VB-C50FSi/VB-C50Fi is included in the free s\
pace on
the on-board file system, files may not be created when the free space b\
ecomes
approximately 100KB ( → P.5-8).
Recorded Picture and Audio data* Information and Manipulation
1
* VB-C50FSi screen
* VB-C50FSi screen
C
O
P
Y