Canon network camera VBC300 User Manual

3-17
NC Viewer and Viewer Switcher
Saving, Printing, and Copying Still image
Saving Still Image to File
To save still image ...
1.Click “Pause/Resume” when the desired
video displayed.
The video is displayed as a still image.
2. Choose “Save” from the File menubar.
After saving the image, click “Pause/Resume”
to restart video display.
Note
Please note that copyright laws prohibit the customer from using recorde\
d videos
and images for any purpose other than personal requirements, without per\
mission...

3-18
3. Configure printing settings.
Click “Setup” to change the printing settings.
After printing the image, click “Pause/Resume”
to display video.
1Print position
You can specify where the image should
be printed.
2 Print camera information
Check this option to print camera parameters including pan and tilt with\
 the image.
Copying Still Image
To copy still image ...
1.Click “Pause/Resume” when the desired
video displayed.
The video is displayed as a still image.
2. Choose “Copy Still Image” from...

3-19
NC Viewer and Viewer Switcher
Camera Information●Pan
Pan angle of the camera
● Tilt
Tilt angle of the camera
● Zoom (viewing angle)
Zoom (viewing angle) angle of the camera
● Backlight compensation
On/Off status of backlight compensation
● Focus
Focus setting of the camera
● White balance
White balance setting of the camera
● Camera Model
Model name of the camera
Network ●Indicator (camera icon)
Network bandwidth of video data
● Indicator (speaker icon)
Network bandwidth of audio data reception
●...

3-20
Changing to Full-Screen Mode
You can display video at full-screen size.
To change to full-screen ...
1. Choose “Full Screen Mode” from theView menu bar.
2. A confirmation dialog appears. Click “OK”.
The display changes to the full-screen mode.
Press the Esc key to return to the previous
screen.
In the full-screen mode, right-click on the display opens the menu and y\
ou can perform the
following operations:
• Stop/start camera control (to stop or start controlling the camera\
)
• Panorama window...

3-21
NC Viewer and Viewer Switcher
Toggling Toolbar Display
To toggle toolbar display ...
Select “Toolbar Display” from the
View menu bar to display or hide the
toolbar.
The toolbar is displayed if there is a check
mark before “Toolbar Display”.
Setting Video Display
You can set the video display size at start up. You can also select whet\
her or not the confirmation
message is displayed when you select the full-screen mode.
To make settings ...
1. Choose “Display Settings” from theView menu bar.
2. The...

3-22
2Confirm when changing to full screen mode
Check this option to display the confirmation message before changing to\
 the full screen
mode.
Adding and Changing Camera List
If you register a camera, you can easily select the camera from the list\
 and connect to it.
This section explains how to register a camera and change a registered c\
amera. Up to 100 cameras
can be registered.
Registering Camera in Connection
To make settings ...
Select “Register Current Camera”
from the File menu bar to...

3-23
NC Viewer and Viewer Switcher
2. Click “Add” from the Camera Listdialog.
3. A Register Camera (Add) dialog box to select a camera appears.
Enter connection settings and click “OK” to add
the camera to the list.
1Nickname
Enter a name for register a camera (You
can use up to 32 alphanumeric characters).
2 Host Name
Enter the IP address or host name set on
the camera ( → P.1-17).
3 User Name
Enter the user name to connect to the
camera. Users can authorized users
registered on the camera ( →P.1-15)...

3-24
▼ To change or delete list contents:
To make settings ...
Choose “Camera List” from the View
menu bar.
The Camera List dialog appears.
Select a camera to change or delete from the
list.
Click “Edit” to change the settings or “Delete”
to delete the camera.
1
Clicking “Edit” opens the Register Camera
(Edit) dialog.
Change the settings. Click “OK” to reflect
the new settings to the camera.
2 Clicking “Delete” deletes the  Camera.
A confirmation message appears.
Clicking “OK” deletes the camera.
▼ To...

3-25
NC Viewer and Viewer Switcher
The following operation and setting are available only to Administrator.\
Setting White Balance
Select from “Auto”, “Light Source”, and “Lock” for the\
 white balance.
To make settings ...
1. Choose “White Balance” from theAdministrator menu bar.
Operating and Setting Camera as Administrator
Note
The white balance setting remains after closing the NC Viewer. Also, it \
is reflected
on the Authorized User’s video.
2. The White Balance dialog appears.
1Auto...

3-26
Operating and Setting Camera as Administrator
●Since the light source setting is based on representative characteristic\
s of each
type of lamp, correct color may not be reproduced depending on the actua\
l lamp
used. In this case, use the One-Shot WB function.
● If the image is greenish when shooting an object under a mercury lamp wh\
ile the
White Balance option is set to “Auto”, select “Mercury Light”\
 with the Light Source
option. If the image color is not yet correct after changing the light...