Canon Lv-7575 Multimedia Projector Users Manual
Here you can view all the pages of manual Canon Lv-7575 Multimedia Projector Users Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
21 BASIC OPERATION Press the POWER button on the top control or on the remote control unit, and “Power off?” appears on the screen. Press the POWER button again to turn off the projector. The LAMP indicator lights bright and the READY indicator turns off. After the projector is turned off, the cooling fans operate (for 90 seconds). During this “cooling down” period, the projector cannot be turned on. 1 2 TO MAINTAIN THE LIFE OF LAMP, ONCE YOU TURN THE PROJECTOR ON, WAIT AT LEAST FIVE MINUTES BEFORE...
Page 22
22 BASIC OPERATION ADJUSTING SCREEN “Zoom” disappears after 4 seconds. “Focus” disappears after 4 seconds. ZOOM ADJUSTMENT FOCUS ADJUSTMENT 1Press the ZOOM button on the top control or ZOOM ▲/▼ buttons on the remote control unit. “Zoom” appears on the screen. 2Press the ZOOM ▲button or POINT UP button to make the image larger, and press the ZOOM ▼button or POINT DOWN button to make the image smaller. 1Press the FOCUS button on the top control or FOCUS ▲ /▼ buttons on the remote control unit. “Focus”...
Page 23
![Page 23
23
Press the FREEZE button on the remote control unit to freeze the picture\
on the screen. To cancel the FREEZE
function, press the FREEZE button again or press any other button.
Press the NO SHOW button on the remote control unit to
black out the image. To restore to normal, press the NO
SHOW button again or press any other button.
NO SHOW FUNCTION
PICTURE FREEZE FUNCTION
“No show” disappears after 4 seconds.
1
2
Press the MENU button to display the On-Screen Menu.
Press the POINT LEFT/RIGHT buttons...](http://img.usermanuals.tech/thumb/14/85737/w300_canon-lv-7575-manual_d-22.png "Page 23
23
Press the FREEZE button on the remote control unit to freeze the picture\
on the screen. To cancel the FREEZE
function, press the FREEZE button again or press any other button.
Press the NO SHOW button on the remote control unit to
black out the image. To restore to normal, press the NO
SHOW button again or press any other button.
NO SHOW FUNCTION
PICTURE FREEZE FUNCTION
“No show” disappears after 4 seconds.
1
2
Press the MENU button to display the On-Screen Menu.
Press the POINT LEFT/RIGHT buttons...")
23 Press the FREEZE button on the remote control unit to freeze the picture\ on the screen. To cancel the FREEZE function, press the FREEZE button again or press any other button. Press the NO SHOW button on the remote control unit to black out the image. To restore to normal, press the NO SHOW button again or press any other button. NO SHOW FUNCTION PICTURE FREEZE FUNCTION “No show” disappears after 4 seconds. 1 2 Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons...
Page 24
24 SELECTING INPUT SOURCE WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS ) Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the INPUT Menu icon. Press the POINT UP/DOWN buttons to move the red arrow pointer to Input 1 and then press the OK button. A Source Select Menu appears. 1 2 Input 1 INPUT MENU Move the pointer to a source that you want to select and then press the OK button.3 When your computer is connected to INPUT 1...
Page 25
![Page 25
25
COMPUTER INPUT
SELECTING COMPUTER SYSTEM
This projector automatically tunes to various types of computers based o\
n VGA, SVGA, XGA, SXGA, SXGA+,
WXGA, or UXGA (refer to “COMPATIBLE COMPUTER SPECIFICATIONS” on p\
ages 55–56). When Computer is
selected, this projector automatically detects the incoming signal and p\
rojects proper image without any
additional setting. (Some computers need to be set manually.)
The projector displays one of these: Auto, -----, Mode 1–10, or the s\
ystem provided in the...](http://img.usermanuals.tech/thumb/14/85737/w300_canon-lv-7575-manual_d-24.png "Page 25
25
COMPUTER INPUT
SELECTING COMPUTER SYSTEM
This projector automatically tunes to various types of computers based o\
n VGA, SVGA, XGA, SXGA, SXGA+,
WXGA, or UXGA (refer to “COMPATIBLE COMPUTER SPECIFICATIONS” on p\
ages 55–56). When Computer is
selected, this projector automatically detects the incoming signal and p\
rojects proper image without any
additional setting. (Some computers need to be set manually.)
The projector displays one of these: Auto, -----, Mode 1–10, or the s\
ystem provided in the...")
25 COMPUTER INPUT SELECTING COMPUTER SYSTEM This projector automatically tunes to various types of computers based o\ n VGA, SVGA, XGA, SXGA, SXGA+, WXGA, or UXGA (refer to “COMPATIBLE COMPUTER SPECIFICATIONS” on p\ ages 55–56). When Computer is selected, this projector automatically detects the incoming signal and p\ rojects proper image without any additional setting. (Some computers need to be set manually.) The projector displays one of these: Auto, -----, Mode 1–10, or the s\ ystem provided in the...
Page 26
![Page 26
26
COMPUTER INPUT
PC ADJUSTMENT
AUTO PC ADJUSTMENT
Auto PC Adjustment function is provided to automatically adjust Fine syn\
c, Total dots, Horizontal and Vertical
positions to conform to your computer. Auto PC Adjustment function can b\
e operated as follows.
Press the MENU button to display the On-Screen
Menu. Press the POINT LEFT/RIGHT buttons to move
the red frame pointer to the PC ADJUST Menu icon.1
2Press the POINT UP/DOWN buttons to move the red
frame pointer to the AUTO PC adj. icon and then...](http://img.usermanuals.tech/thumb/14/85737/w300_canon-lv-7575-manual_d-25.png "Page 26
26
COMPUTER INPUT
PC ADJUSTMENT
AUTO PC ADJUSTMENT
Auto PC Adjustment function is provided to automatically adjust Fine syn\
c, Total dots, Horizontal and Vertical
positions to conform to your computer. Auto PC Adjustment function can b\
e operated as follows.
Press the MENU button to display the On-Screen
Menu. Press the POINT LEFT/RIGHT buttons to move
the red frame pointer to the PC ADJUST Menu icon.1
2Press the POINT UP/DOWN buttons to move the red
frame pointer to the AUTO PC adj. icon and then...")
26 COMPUTER INPUT PC ADJUSTMENT AUTO PC ADJUSTMENT Auto PC Adjustment function is provided to automatically adjust Fine syn\ c, Total dots, Horizontal and Vertical positions to conform to your computer. Auto PC Adjustment function can b\ e operated as follows. Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the PC ADJUST Menu icon.1 2Press the POINT UP/DOWN buttons to move the red frame pointer to the AUTO PC adj. icon and then...
Page 27
![Page 27
27
COMPUTER INPUT
MANUAL PC ADJUSTMENT
This projector can automatically tune to display signals from most perso\
nal computers currently distributed.
However, some computers employ special signal formats which may not be t\
uned by the Multi-Scan system of
this projector. If this happens, the projector cannot reproduce proper i\
mage and it may be recognized as a
flickering; non-synchronized; non-centered; or skewed picture.
Manual PC Adjustment of this projector enables you to precisely adjust s\
everal...](http://img.usermanuals.tech/thumb/14/85737/w300_canon-lv-7575-manual_d-26.png "Page 27
27
COMPUTER INPUT
MANUAL PC ADJUSTMENT
This projector can automatically tune to display signals from most perso\
nal computers currently distributed.
However, some computers employ special signal formats which may not be t\
uned by the Multi-Scan system of
this projector. If this happens, the projector cannot reproduce proper i\
mage and it may be recognized as a
flickering; non-synchronized; non-centered; or skewed picture.
Manual PC Adjustment of this projector enables you to precisely adjust s\
everal...")
27 COMPUTER INPUT MANUAL PC ADJUSTMENT This projector can automatically tune to display signals from most perso\ nal computers currently distributed. However, some computers employ special signal formats which may not be t\ uned by the Multi-Scan system of this projector. If this happens, the projector cannot reproduce proper i\ mage and it may be recognized as a flickering; non-synchronized; non-centered; or skewed picture. Manual PC Adjustment of this projector enables you to precisely adjust s\ everal...
Page 28
![Page 28
28
COMPUTER INPUT
Exit the PC ADJUST Menu.
To store the adjusted parameters, move the red frame pointer to
the Store icon and then press the OK button. Move the red
arrow pointer to any of the Mode 1 to 10 in which you want to
store the parameters and then press the OK button.
To reset the adjusted parameters, select Reset and press the
OK button. A confirmation box appears. Select [Yes]. All the
adjustments return to their previous figures.To store adjustment data.
To clear adjustment data.
To clear...](http://img.usermanuals.tech/thumb/14/85737/w300_canon-lv-7575-manual_d-27.png "Page 28
28
COMPUTER INPUT
Exit the PC ADJUST Menu.
To store the adjusted parameters, move the red frame pointer to
the Store icon and then press the OK button. Move the red
arrow pointer to any of the Mode 1 to 10 in which you want to
store the parameters and then press the OK button.
To reset the adjusted parameters, select Reset and press the
OK button. A confirmation box appears. Select [Yes]. All the
adjustments return to their previous figures.To store adjustment data.
To clear adjustment data.
To clear...")
28 COMPUTER INPUT Exit the PC ADJUST Menu. To store the adjusted parameters, move the red frame pointer to the Store icon and then press the OK button. Move the red arrow pointer to any of the Mode 1 to 10 in which you want to store the parameters and then press the OK button. To reset the adjusted parameters, select Reset and press the OK button. A confirmation box appears. Select [Yes]. All the adjustments return to their previous figures.To store adjustment data. To clear adjustment data. To clear...
Page 29
29 COMPUTER INPUT PICTURE IMAGE SELECT Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the IMAGE SELECT Menu icon.1 2Press the POINT UP/DOWN buttons to move the red frame pointer to the desired level and then press the OK button. IMAGE SELECT MENU Normal picture level preset on this projector. Standard Picture level with improved halftone for graphics. High contrast User preset picture adjustment in the IMAGE ADJUST Menu....
Page 30
![Page 30
30
PICTURE SCREEN ADJUSTMENT
This projector has a picture screen resize function, which enables you t\
o display the desirable image size.
Press the MENU button to display the On-Screen
Menu. Press the POINT LEFT/RIGHT buttons to move
the red frame pointer to the SCREEN Menu icon.
When the Digital zoom + is selected, the On-Screen Menu
disappears and “D. Zoom +” appears. Press the OK button to
expand the image size. Press the POINT UP/DOWN/LEFT/RIGHT
buttons to pan the image. The Panning function can...](http://img.usermanuals.tech/thumb/14/85737/w300_canon-lv-7575-manual_d-29.png "Page 30
30
PICTURE SCREEN ADJUSTMENT
This projector has a picture screen resize function, which enables you t\
o display the desirable image size.
Press the MENU button to display the On-Screen
Menu. Press the POINT LEFT/RIGHT buttons to move
the red frame pointer to the SCREEN Menu icon.
When the Digital zoom + is selected, the On-Screen Menu
disappears and “D. Zoom +” appears. Press the OK button to
expand the image size. Press the POINT UP/DOWN/LEFT/RIGHT
buttons to pan the image. The Panning function can...")
30 PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you t\ o display the desirable image size. Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the SCREEN Menu icon. When the Digital zoom + is selected, the On-Screen Menu disappears and “D. Zoom +” appears. Press the OK button to expand the image size. Press the POINT UP/DOWN/LEFT/RIGHT buttons to pan the image. The Panning function can...