Canon Lv-7225, Lv-7220, Lv-5220 Multimedia Projector Owners Manual
Here you can view all the pages of manual Canon Lv-7225, Lv-7220, Lv-5220 Multimedia Projector Owners Manual. The Canon manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
31 Computer Input Select the resolution at the Display area dialog box.Display area Adjusts the horizontal area displayed by this projector. Press the Point 7 8button to decrease/increase value and then press the SET button.Display area H Adjusts the vertical area displayed by this projector. Press the Point 7 8button to decrease/increase value and then press the SET button.Display area V With this function on, SXGA image is fully displayed at 4 : 3 aspect ratio. It is displayed at 5 : 4 aspect...
Page 32
32 Computer Input Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8button to move the red frame pointer to the Image Select Menu icon.1 2Press the Point d dbutton to move the red frame pointer to the level that you want to set and then press the SET button. Move the red frame pointer to the level and press the SET button. The level being selected. Image Select Menu Normal picture level preset on this projector.Standard Picture adjustment improved in reproduction of the...
Page 33
33 Computer Input Press the Point 7 8 button to adjust value. Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8button to move the red frame pointer to the Image Adjust Menu icon.1 2Press the Point d dbutton to move the red frame pointer to the item that you want to adjust, and then press the SET button. The level of each item is displayed. Adjust each level by pressing the Point 7 8button. Move the red frame pointer to the item to be selected and then press the SET...
Page 34
34 Computer Input This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8button to move the red frame pointer to the Screen Menu icon.1 Move the red frame to the function and press the SET button.Press the Point d dbutton and move the red frame pointer to the function that you want to select and then press the SET button.2 ✔Note: • This Screen Menu cannot be operated when...
Page 35
35 Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control unit. Before using these buttons, correct input source should be selected through menu operation as described below. Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8button to move the red frame pointer to the Input Menu icon. Press the Point d dbutton to move the red arrow pointer to Video and then press the SET button. The Source Select Menu will appear. 1 2 Move the...
Page 36
36 Video Input Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8button to move the red frame pointer to the Input Menu icon.1 Press the Point d dbutton to move the red arrow pointer to Computer 2, and then press the SET button. The Source Select Menu will appear. 2 Move the pointer to the correct input source and then press the SET button.3 Move the pointer (red arrow) to Computer 1 and press the SET button. Move the pointer to Component or RGB (Scart) and press the SET...
Page 37
37 Video Input Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8button to move the red frame pointer to the AV System Menu icon.1 Video System Selection AV System Menu (Video or S-Video) AV System Menu (Component) Press the Point d dbutton to move the red arrow pointer to the system that you want to select and then press the SET button.2 If the projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC,...
Page 38
38 Video Input Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8button to move the red frame pointer to the Image Select Menu icon.1 2Press the Point d dbutton to move the red frame pointer to the level that you want to set and then press the SET button.Move the red frame pointer to a level and press the SET button. The level being selected. Image Select Menu Normal picture level preset on this projector.Standard Picture level adjusted for the picture with fine tone.Cinema...
Page 39
39 Video Input Press the Point 7 8button to adjust value. Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8button to move the red frame pointer to the Image Adjust Menu icon.1 2Press the Point d dbutton to move the red frame pointer to the item that you want to adjust and then press the SET button. The level of each item is displayed. Adjust each level by pressing the Point 7 8button. Move the red frame pointer to the item to be selected and then press the SET button....
Page 40
![Page 40
40
Video Input
To store the adjustment data, move the red frame pointer to the
Store icon and press the SET button. The message “OK?” will
appear. Select [Yes] to store the adjustment data.
To select this manual adjustment, select Custom by pressing the
IMAGE button or through the Image Select Menu (p38).
“OK?” message
Move the pointer to [Yes]
and then press the SET
button.
Resets all adjustment to their previous figure.
Reset
Store
Closes the Image Adjust Menu.
Quit
Interlaced video signal can be...](http://img.usermanuals.tech/thumb/14/85719/w300_canon-lv-5220-manual_d-39.png "Page 40
40
Video Input
To store the adjustment data, move the red frame pointer to the
Store icon and press the SET button. The message “OK?” will
appear. Select [Yes] to store the adjustment data.
To select this manual adjustment, select Custom by pressing the
IMAGE button or through the Image Select Menu (p38).
“OK?” message
Move the pointer to [Yes]
and then press the SET
button.
Resets all adjustment to their previous figure.
Reset
Store
Closes the Image Adjust Menu.
Quit
Interlaced video signal can be...")
40 Video Input To store the adjustment data, move the red frame pointer to the Store icon and press the SET button. The message “OK?” will appear. Select [Yes] to store the adjustment data. To select this manual adjustment, select Custom by pressing the IMAGE button or through the Image Select Menu (p38). “OK?” message Move the pointer to [Yes] and then press the SET button. Resets all adjustment to their previous figure. Reset Store Closes the Image Adjust Menu. Quit Interlaced video signal can be...