Canon lens TsE 24mm f35L II User Manual
Have a look at the manual Canon lens TsE 24mm f35L II User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 13
ENG-12
Using ShiftTurn the shift lock knob in
the direction of the arrow to
lock the amount of shift for
the shot.
Loosen the shift lock knob
by turning it in the direction
of the arrow.
T
urn the shift knob to adjust
the amount of shift. Focus
the shot by turning the
focusing ring.
When you shift the lens, sharp portions of the shift mechanism are expos\
ed and care should be taken to
avoid touching these portions. For EOS cameras with built-in flash, ther\
e may be contact with the lens while
you...](http://img.usermanuals.tech/thumb/14/1531/w64_lens-tse-24mm-f35l-ii-1478305021_d-12.png "Page 13
ENG-12
Using ShiftTurn the shift lock knob in
the direction of the arrow to
lock the amount of shift for
the shot.
Loosen the shift lock knob
by turning it in the direction
of the arrow.
T
urn the shift knob to adjust
the amount of shift. Focus
the shot by turning the
focusing ring.
When you shift the lens, sharp portions of the shift mechanism are expos\
ed and care should be taken to
avoid touching these portions. For EOS cameras with built-in flash, ther\
e may be contact with the lens while
you...")
![Page 14
ENG-13
5. Rotation
The rotation function enables you to change the direction of tilt or
shift by rotating the tilt-shift mechanism.
With the lens mounted on the camera, push the rotation lock release
button towards the mount and then turn the tilt-shift mechanism.
●The rotation mechanism can be rotated through ±90°. The lens clicks every
30° and locks in place in the 90° position.
●When rotating the lens, set the tilt and shift scales to the “0” p\
osition.
● Note that rotating the tilt-shift mechanism...](http://img.usermanuals.tech/thumb/14/1531/w64_lens-tse-24mm-f35l-ii-1478305021_d-13.png "Page 14
ENG-13
5. Rotation
The rotation function enables you to change the direction of tilt or
shift by rotating the tilt-shift mechanism.
With the lens mounted on the camera, push the rotation lock release
button towards the mount and then turn the tilt-shift mechanism.
●The rotation mechanism can be rotated through ±90°. The lens clicks every
30° and locks in place in the 90° position.
●When rotating the lens, set the tilt and shift scales to the “0” p\
osition.
● Note that rotating the tilt-shift mechanism...")
![Page 18
ENG-17
10. Hood (TS-E24mm f/3.5L II)
The EW-88B lens hood can keep unwanted light out of the lens, and also protect\
s the lens from
rain, snow, and dust.
To attach the hood, align the hood’s attachment
position mark with the red dot on the front of the lens,
then turn the hood as shown by the arrow until the lens’
red dot is aligned with the hood’s stop position mark.
The hood can be reverse-mounted on the lens for
storage.
When attaching or detaching the hood, grasp the base of the hood to turn\
it....](http://img.usermanuals.tech/thumb/14/1531/w64_lens-tse-24mm-f35l-ii-1478305021_d-17.png "Page 18
ENG-17
10. Hood (TS-E24mm f/3.5L II)
The EW-88B lens hood can keep unwanted light out of the lens, and also protect\
s the lens from
rain, snow, and dust.
To attach the hood, align the hood’s attachment
position mark with the red dot on the front of the lens,
then turn the hood as shown by the arrow until the lens’
red dot is aligned with the hood’s stop position mark.
The hood can be reverse-mounted on the lens for
storage.
When attaching or detaching the hood, grasp the base of the hood to turn\
it....")
![Page 22
TS-E17mm f/4LTS-E24mm f/3.5L IIFilter Diameter —82mmMax. Diameter and Length 88.9 ×106.7mm (3.5 ×4.2inch) 88.5 ×106.9mm (3.5 ×4.2inch)W eight 820g (28.9oz) 780g (27.5oz)Hood —EW-88BLens Cap Lens Cap 17 E-82/E-82 II
Case LP1219 LP1319
ENG-21
Specifications
● The lens length is measured from the mount surface to the front end of t\
he lens. Add 26mm to the
displayed length for TS-E17mm f/4L when including the lens cap and dust cap. For TS-E24mm
f/3.5L II, add 21.5 mm to include the E-82 lens cap and...](http://img.usermanuals.tech/thumb/14/1531/w64_lens-tse-24mm-f35l-ii-1478305021_d-21.png "Page 22
TS-E17mm f/4LTS-E24mm f/3.5L IIFilter Diameter —82mmMax. Diameter and Length 88.9 ×106.7mm (3.5 ×4.2inch) 88.5 ×106.9mm (3.5 ×4.2inch)W eight 820g (28.9oz) 780g (27.5oz)Hood —EW-88BLens Cap Lens Cap 17 E-82/E-82 II
Case LP1219 LP1319
ENG-21
Specifications
● The lens length is measured from the mount surface to the front end of t\
he lens. Add 26mm to the
displayed length for TS-E17mm f/4L when including the lens cap and dust cap. For TS-E24mm
f/3.5L II, add 21.5 mm to include the E-82 lens cap and...")
ENG-20 TS-E17mm f/4LTS-E24mm f/3.5L IIFocal Length/Aperture 17mm f/424mm f/3.5Lens Construction 12 groups, 18 elements 11 groups, 16 elementsMinimum Aperture f/22f/22 Angle of ViewDiagonal 104° 84°(Normal)Ver tical 70° 30’ 53°Horizontal93° 74°Min. Focusing Distance 0.25m (0.82ft.)0.21m (0.69ft.)Max. Magnification 0.14×0.34×Field of View 168 ×251mm (6.6 × 9.9inch) 72 ×107mm (2.8 ×4.2inch)Tilt amount ±6.5°±8.5°Shift amount ±12mmTilt scale display 1° incrementsShift scale display1mm incrementsRotation mechanismLocks at –90°, 0° and +90°, clicks every 30° TS Rotation mechanism Locks at right angle and parallel, and clicks at 45° Specifications 02-7587_ENG 10.2.10 3:48 PM Page 20 COPY
TS-E17mm f/4LTS-E24mm f/3.5L IIFilter Diameter —82mmMax. Diameter and Length 88.9 ×106.7mm (3.5 ×4.2inch) 88.5 ×106.9mm (3.5 ×4.2inch)W eight 820g (28.9oz) 780g (27.5oz)Hood —EW-88BLens Cap Lens Cap 17 E-82/E-82 II Case LP1219 LP1319 ENG-21 Specifications ● The lens length is measured from the mount surface to the front end of t\ he lens. Add 26mm to the displayed length for TS-E17mm f/4L when including the lens cap and dust cap. For TS-E24mm f/3.5L II, add 21.5 mm to include the E-82 lens cap and dust cap, and 24 mm for\ the E-82 II. ● The size and weight listed are for the lens only, except as indicated. ● The EF1.4 × II/EF2 × II extenders, 250D/500D close-up lenses and the gelatin filter holders I\ II/IV cannot be used. ● Aperture settings are specified on the camera. ● All data listed is measured according to Canon standards. ● Product specifications and appearance are subject to change without noti\ ce. 02-7587_ENG 12.7.13 7:57 PM Page 21 COPY
CT1-8562-002 1208SZ © CANON INC. 2009 00-8562(7587)H4_CID_Ver3.3 12.7.13 7:59 PM ページ 1 COPY