Canon lens EFS 1022mm f3545 USM User Manual

							EF-S10-22mm f/3.5-4.5 USM
Instruction
ENG
COPY  
						

							ENG-1
Thank you for purchasing a Canon product.
The Canon EF-S10-22mm f/3.5-4.5 USM lens
is a compact and lightweight, ultra-wide
angle lens with high-performance optics. It
has been developed for use with EOS
cameras* compatible with EF-S lenses.
¡“USM” stands for Ultrasonic Motor.Features
1. An aspheric lens element and super UD lenselement afford excellent image delineation
and ultra-wide zoom.
2. Ultrasonic motor (USM) for quick and quiet autofocusing.
3. Manual focusing is available after the subject comes into focus in autofocus mode (ONE
SHOT AF).
4. A truly round aperture hole results in a nicer background blur.
Conventions used in this instruction
Warning to prevent lens or camera
malfunction or damage.
Supplementary notes on using the lens
and taking pictures.
*Only the following cameras are compatible with
EF-S lenses (as of August 2012):
EOS 7D, EOS 60D, EOS 50D, EOS 40D, EOS
30D, EOS 20D, EOS 20Da, EOS REBEL
T4i/650D, EOS REBEL T3i/600D, EOS REBEL
T2i/550D, EOS REBEL T1i/500D, EOS REBEL
XSi/450D, EOS REBEL T3/1100D, EOS REBEL
XS/1000D, EOS DIGITAL REBEL XTi/400D
DIGITAL, EOS DIGITAL REBEL XT/350D
DIGITAL, EOS DIGITAL REBEL/300D DIGITAL
COPY  
						

							ENG-2
aSafety Precautions•Do not look at the sun or a bright light source
through the lens or camera. Doing so could
result in loss of vision. Looking at the sun directly
through the lens is especially hazardous.
• Whether it is attached to the camera or not, do
not leave the lens under the sun without the
lens cap attached. This is to prevent the lens from
concentrating the sun’s rays, which could cause a
fire.
Handling Cautions• If the lens is taken from a cold environment into
a warm one, condensation may develop on the
lens surface and internal parts. To prevent
condensation in this case, first put the lens into an
airtight plastic bag before taking it from a cold to
warm environment. Then take out the lens after it
has warmed gradually. Do the same when taking
the lens from a warm environment into a cold one.
• Do not leave the lens in excessive heat such as in
a car in direct sunlight.  High temperatures can
cause the lens to malfunction.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Do not make any changes or modifications to the equipment
unless otherwise specified in the instructions. If such changes or
modifications should be made, you could be required to stop
operation of the equipment.
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for
help.
This Class B digital apparatus complies with Canadian ICES-003.
COPY  
						

							ENG-3
Nomenclature
Distance scale (→ 5)
Contacts (→ 4) Focus mode switch
(→ 4)
Hood mount (→ 7)
Lens mount index (→ 4)
Filter mounting 
thread (→ 6)
Zoom ring (→ 5) Focusing ring (→ 4)
Zoom position index (→ 5)
For detailed information, reference page numbers are provided in parenth\
eses (
→ **).
COPY  
						

							ENG-4
1Mounting and Detaching the Lens
See your camera’s instructions for details on
mounting and detaching the lens.
¡After detaching the lens, place the lens with the
rear end up to prevent the lens surface and
electrical contacts from getting scratched.
¡ If the contacts get soiled, scratched, or have
fingerprints on them, corrosion or faulty
connections can result. The camera and lens
may not operate properly.
¡ If the contacts get soiled or have fingerprints on
them, clean them with a soft cloth.
¡ If you remove the lens, cover it with the dust
cap. To attach it properly, align the lens mount
index and the  ¢index of the dust cap as shown
in the diagram, and turn clockwise. To remove
it, reverse the order.
2Setting the Focus Mode
After autofocusing in ONE SHOT AF mode, focus
manually by pressing the shutter button halfway
and turning the focusing ring. (Full-time manual
focus)
To shoot in autofocus (AF) mode, set the focus
mode switch to AF.
To use only manual focusing (MF), set the focus
mode switch to MF, and focus by turning the
focusing ring. The focusing ring always works,
regardless of the focus mode.
COPY  
						

							ENG-5
4Infinity Compensation Mark
To compensate for shifting of the infinity focus
point that results from changes in temperature.
The infinity position at normal temperature is the
point at which the vertical line of the L mark is
aligned with the distance indicator on the
distance scale.
For accurate manual focusing on subjects at
infinity distance, look through the viewfinder while
rotating the focusing ring.
3Zooming
To zoom, turn the lens’ zoom ring.
Be sure to finish zooming before focusing.
Changing the zoom ring after focusing can affect
the focus.
Infinity compensation markDistance index
COPY  
						

							ENG-6
5Filters (Sold Separately)
You can attach filters to the filter mounting
thread on the front of the lens.
¡Only one filter may be attached.
¡If you need a polarizing filter, use the CanonCircular Polarizing Filter (77mm).
6Extension Tubes (Sold Separately)
You can attach Extension Tube EF12 II for
magnified shots. The shooting distance and
magnification are shown below.
Although Extension Tube EF25 II can be attached,
it is not recommended because the lens-to-subject
distance will be very short.
Camera-to-Subject  Magnification
Distance (mm)
Near Far Near Far
EF12 II 10mm Incompatible
22mm 155 165 0.77×
0.58×
Manual focusing is recommended for accurate
focusing.
COPY  
						

							ENG-7
7Hood (Sold Separately)
The EW-83E hood can keep unwanted light out of the lens, and also protec\
ts the lens from rain,
snow, and dust.
To attach the hood, align the hood’s attachment position mark with th\
e red dot on the front of the
lens, then turn the hood as shown by the arrow until the lens red dot i\
s aligned with the hoods stop
position mark.
The hood can be reverse-mounted on the lens for storage.
¡Part of the picture may be blocked if the hood is not attached properly.\
¡When attaching or detaching the hood, grasp the base of the hood to turn\
 it. To prevent deformation, do notgrasp the rim of the hood to turn it.
COPY  
						

							ENG-8
8Close-up Lenses (Sold separately)
Attaching a 500D (77mm) Close-up Lens
enables close-up photography.
Magnification will be 0.20×– 0.02×.
¡Close-up Lens 250D cannot be attached
because there is no size that fits the lens.
¡Manual focusing is recommended for accurate focusing.
COPY  
						

							ENG-9
9Specifications
Focal Length/Aperture10 – 22 mm f/3.5 – 4.5Lens Construction10 groups, 13 elementsMinimum Aperturef/22 – 29*
Angle of View Diagonal: 107° 30’ – 63° 30’     Vertical: 74° 10’ – 37° 50’
Horizontal: 97° 10’ – 54° 30’Min. Focusing Distance0.24 m/0.8 ft.Max. Magnification 0.17 × (at 22 mm)Field of View approx. 189 ×291 – 92 ×138 mm/7.4 × 11.5 – 3.6 ×5.4 inch(at 0.24 m )Filter Diameter 77 mm/3.0 inchMax. Diameter and Length83.5 ×89.8 mm/3.3  ×3.5 inchWeight  385 g/13.6 oz HoodEW-83E (Sold separately)Lens CapE-77U/E-77 II
Case LP1319 (Sold separately)
* Applies to 1/3-stop increments. With 1/2-stop increments, it will be f\
/22-27.
¡Equivalent to 16-35 mm in the 35mm film format.
¡The lens length is measured from the mount surface to the front end of t\
he lens. Add 21.5 mm to include the
E-77U lens cap and dust cap, and 24.2 mm for the E-77 II.
¡The size and weight listed are for the lens only, except as indicated.
¡The EF1.4X II/EF2X II extenders cannot be used with this lens. 
¡Aperture settings are specified on the camera. The camera automatically \
compensates for variations in the aperture setting when the camera is zoomed in or out.
¡All data listed is measured according to Canon standards.
¡Product specifications and appearance are subject to change without noti\
ce.
COPY