Canon lens EFM 28mm f35 Macro IS STM User Manual

EF-M28mm f/3.5 MACRO IS STM
Instructions
ENG  

ENG-1
Thank you for purchasing a Canon product.
The Canon EF-M28mm f/3.5 MACRO IS STM 
is a macro lens for use on Canon EOS M 
Series cameras. It is equipped with an Image 
Stabilizer capable of shooting portraits, 
scenery and other normal shots, as well as 
close-up (macro) shots with a magnification 
ratio of 1.2x.
●
● “IS” stands for Image Stabilizer.
●
● “STM” stands for stepping motor.
Camera Firmware
●
● When using this lens, please check the Canon website 
for the latest camera firmware. If the...

ENG-2
Precautions to ensure that the camera is used 
safely. Read these precautions thoroughly. Make 
sure all details are observed in order to prevent 
risks and injury to the user and other people.
 Warning Details pertaining to risks that may 
result in death or serious injury.
●
● Do not look at the sun or a bright light source 
through the lens.  Doing so could result in vision loss 
or blindness.
●
● Whether it is attached to the camera or not, do 
not leave the lens under the sun without the 
lens...

ENG-3
General Precautions
Handling Precautions
●
● If the lens is taken from a cold environment into a 
warm one, condensation may develop on the lens 
surface and internal parts. To prevent condensation in 
this case, first put the lens into an airtight plastic bag 
before taking it from a cold to warm environment. Then 
take out the lens after it has warmed gradually. Do the 
same when taking the lens from a warm environment 
into a cold one.
●
● Please also read any lens related handling precautions...

ENG-4
This device complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions: (1) This 
device may not cause harmful interference, and (2) this 
device must accept any interference received, including 
interference that may cause undesired operation.
Do not make any changes or modifications to the equipment 
unless otherwise specified in the instructions. If such 
changes or modifications should be made, you could be 
required to stop operation of the equipment.
This...

ENG-5
Super macro mode index (→ 7)
Mode selection ring (→ 7)
Macro Lite B (→ 15)
Contacts (→ 6)
Hood mount (→ 17)
Focusing ring (→ 9)
Macro Lite A (→ 15) Mode selection index (→ 7)
Normal mode index (→ 7)
Lens mount index (→ 6)
Macro Lite ON button (→ 16)
Retraction location 
index (→ 8)
Lock release switch (→ 7)
●
● For detailed information, reference page numbers are provided in parentheses (→ **).
Nomenclature 

ENG-6
See your camera’s instructions for details on 
mounting and detaching the lens.
●
● After detaching the lens, place the lens with 
the rear end up to prevent the lens surface and 
contacts from getting scratched.
●
● If the contacts get soiled, scratched, or have 
fingerprints on them, corrosion or faulty 
connections can result. The camera and lens 
may not operate properly. 
●
● If the contacts get soiled or have fingerprints on 
them, clean them with a soft cloth.
●
● Attach the lens cap and...

ENG-7
Set the mode selection ring to the normal mode or the super macro mode when taking photographs.
Shooting Preparations and Retracting Lens2
Normal ModeThe normal mode enables infinite distance 
photography through to close-up (macro) 
photography.
To prepare for this, press the lock release switch 
in the ▲ direction with the lens retracted, rotate 
the mode selection ring and align the normal 
mode index with the mode selection index.Super Macro ModeThe super macro mode is only used for close-up...

ENG-8
The lens can be retracted.
To retract the lens, press the lock release switch 
in the ▲ direction, rotate the mode selection ring 
and align the retraction location index with the 
mode selection index.Shooting Preparations and Retracting Lens
●
● It is only possible to start shooting videos or 
shoot still photographs if the mode selection ring 
is set at the normal mode or super macro mode.
●
● Video filming will be terminated once the mode 
selection ring is rotated from the normal mode 
towards...

ENG-9
●
● The magnification ratio represents the ratio 
between the actual size of the subject and the 
size of the image.
●
● The distance range represents the distance 
between the 
 mark (image mark) on the 
camera and the subject.
●
● The minimum distance range from the front of 
the lens to the subject (working distance) is 
1.8cm in the normal mode and 1.3cm in the 
super macro mode.
When the camera’s focus mode is set to [MF], 
focus manually by turning the focusing ring.
Quickly rotating the...