Home > Canon > Lens > Canon lens CNE30105mm T28 L SP User Manual

Canon lens CNE30105mm T28 L SP User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon lens CNE30105mm T28 L SP User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							1011
    ž«·±æ”	
    ÇZ
    GO
    omm
    S» Ó¢EFÚ¢ïÄ£
    SP» Ó¢PLÚ¢ïÄ£
    ªž“7
    Ñ¥”§µÅå Òªž ¶”ÜÅå Òªžž æµÅå Òªž
    Ã
    : 133 111 111
    Þ´á”ç 0.8 0.80.8
    P .C.D. 106.4 mm 88.8 mm88.8 mm
    
    â^¯ 300°
    93.5°
    55° 
    						
    							1011
    “7
    CN-E30-105mm T2.8 L SCN-E30-105mm  T2.8 L SP
    Ú¢ïÄ» Ó ©àÊï EFÚ¢ïÄ PL Ú¢ïÄ
    	¯:‘m 30 ™ 105 mm
    T ÆïÌ” T2.8¢f=30™105£
    Ü“Ë•
    : 11
    
    þØ Super 35mm 
     Ý”´±”«ç—
    
    + x 
    (Ú¢1.781£ Φ
    27.5 mm —
    24.0 x 13.5 mm
    ¿¯zh¯¢
    +—
    (Ú£ 43.6°
     — 25.4 °
    lzh¯¢
    +—
    (Ú£ 13.0Ã — 7.4 °
    
    þØ EOS C300 
     Ý”´±”«ç—
    
    + x 
    (Ú¢1.781£ Φ
    28.2 mm —
    24.6 x 13.8 mm
    ¿¯zh¯¢
    +—
    (Ú£ 44.6Ã — 25.9 °
    lzh¯¢
    +—
    (Ú£ 13.4Ã — 7.5 °
    
    þØ EOS C500 
     Ý”´±”«ç—
    
    + x 
    (Ú¢1.91£ Φ
    29.6 mm —
    26.2 x 13.8 mm
    ¿¯zh¯¢
    +—
    (Ú£ 47.2Ã
     — 25.9°
    lzh¯¢
    +—
    (Ú£ 14.2Ã — 7.5 °
    7yqè‘m¢M.O.D.£ 0.6 m¢ Ý”´·ï±”T’£
    M.O.D. Ìw
    
    ƒø.
    c“
    ¢# x 	N£ Super 35mm
    32.3 x 18.2 cm¢¿¯z£
    9.3 x 5.2 cm¢lz£
    EOS C300 33.1 x 18.6 cm¢¿¯z£
    9.6 x 5.4 cm¢lz£
    EOS C500 35.3 x 18.6 cm¢¿¯z£
    10.2 x 5.4 cm¢lz£
    Ñ¥”§µ
    â^¯ 300°
    ¶”Ü
    â^¯ 93.5°
    ªžÞ´á”ç 0.8
    ÑéïÄ Φ
    114 mm
    
    ¶Õ 218 mm210 mm
    í” 2.2 kg
    Ί
    a
    ¼x Φ
    15z Φ
    19 w¤	³É;ž«·±æ”t0 `oM‡b{
    Î  Š
    a
    ¼xz·ï±”± ¶U Super 35mm
    ìpS‘|APS-Cw§Ýåt0 `oM‡bUz
    35mm Ñç± ¶S‘| APS-Hw§Ýåtx0 `oM‡dœ{ 
    						
    							12
    €ß	ØC
    Šèï¶xˆhqè;ÑçÚÇážçèï¶pb{
    • Š èï¶xéh
    M^›	t‰
    C^•z éh;t°
    `$s§å”Ìåïµ›ËloM‡b{  
    
    i ­hqè›,Šqb” EF  èï¶q
    z±b”q†	í¯›3|h	í6qtsloM‡bwpz  
    † èﶛ;b”Mxz 
    žAt a§å”ÌåïµwÐ
    T¢ ×ë ÄÌåïµw	Ú`sr£
    ›îª`oXi^M{
    •  Ü “‰L
    ÇÙS‘|Ù‘mw
    ƒø.pxz °
    `t
    ƒø„
    SU
    ™Xz ÐïÄwùO
    c“UÊ
    od‡Xs“‡b{‡hz 	¯:‘mUÕMèﶄr\w²xf¶ts“‡b{qètKhl
    o xz Ñ ï¼”w¦GÞ”Åspù	¯	Ý6›	û	Ot¬Ý`z 	G
    üsµÄqè›ælh	Í
    pÑ¥”§µ
    â^›æloXi^M{
    (EF Ú¢ïÄèï¶v£
    •  Š èï¶wÜ“æï¬	Ítx T ‹ ›
    ¯Ô`oM‡b{ °Mz \wèï¶T’§ÝåwÜ“	Ø
    C xz 	HRw EF è ï¶qw;›ß€`o F ‹›–;
    `oM”hŠz §Ýåpxèï¶w
    Ü“æï¬	Íw
    ¯ÔqŸs”‹¢F ‹£U
    ¯Ô^•‡b{
    •  èï¶	¯:‘m	ØCw§Ýåw
    ¯Ôxz	–
    ::Ž
    						
    							ENGLISH
    ENGLISH
    The English version is the operation manual for counties other than Japan.
     GENER AL SAFETY INFORMATION ......4
    Product Configuration  ....................................... 6
    Names of Parts  ................................................. 7
    F.B. (Back Focus) Adjustment  ...........................8
    Available Accessories  ..................................... 10
    Dimensions of Parts  ........................................ 12
    Specifications  .................................................. 13
    Appendix External view  .................................  apx. 2 
    						
    							2
    ENGLISH
    3
    FCC REGULATIONS
    This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
    conditions: (1) This device may not cause harmful interference, and (2) this device must accept 
    any interference received, including interference that may cause undesired operation.
    Note: This equipment has been tested and found to comply with the limits for a Class B digital 
    device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
    protection against harmful interference in a residential installation. This equipment generates, 
    uses and can radiate radio frequency energy and, if not installed and used in accordance with 
    the  instructions,  may  cause  harmful  interference  to  radio  communications.  However,  there  is 
    no guarantee that interference will not occur in a particular installation. If this equipment does 
    cause harmful interference to radio or television reception, which can be determined by turning 
    the  equipment  off  and  on,  the  user  is  encouraged  to  try  to  correct  the  interference  by  one  or 
    more of the following measures:
    -- Reorient or relocate the receiving antenna.
    -- Increase the separation between the equipment and receiver.
    -- Connect the equipment into an outlet on a circuit different from that to which the receiver is
        connected.
    -- Consult the dealer or an experienced radio/TV technician for help.
    Do  not  make  any  changes  or  modifications  to  the  equipment  unless  otherwise  specified  in 
    the  manual.  If  such  changes  or  modifications  should  be  made,  you  could  be  required  to  stop 
    operation of the equipment.
    Canadian Radio Interference Regulations
    CAN ICES-3(B)/NMB-3(B) 
    						
    							23
    European Union (and EEA) only.This  symbol  indicates  that  this  product  is  not  to  be  disposed  of  with  your 
    household  waste,  according  to  the  WEEE  Directive  (2002/96/EC)  and  your 
    national  law.  This  product  should  be  handed  over  to  a  designated  collection 
    point,  e.g.,  on  an  authorized  one-for-one  basis  when  you  buy  a  new  similar 
    product  or  to  an  authorized  collection  site  for  recycling  waste  electrical  and 
    electronic  equipment  (EEE).  Improper  handling  of  this  type  of  waste  could 
    have a possible negative impact on the environment and human health due to 
    potentially  hazardous  substances  that  are  generally  associated  with  EEE.  At 
    the  same  time,  your  cooperation  in  the  correct  disposal  of  this  product  will  contribute  to  the 
    effective usage of natural resources. For more information about where you can drop off your 
    waste equipment for recycling, please contact your local city office, waste authority, approved 
    WEEE scheme or your household waste disposal service.
    Your  cooperation  in  the  correct  disposal  of  this  product  will  contribute  to  the  effective  usage 
    of natural resources and will avoid incurring administrative sanctions according to art. 50 and 
    following of Italian legislative decree 22/97. 
    For more information regarding return and recycling of WEEE products, please visit 
    www.canon-europe.com/environment .
    (EEA: Norway, Iceland and Liechtenstein) 
    						
    							45
    GENERAL SAFETY 
    INFORMATION
    The safety warnings and cautions provided on 
    the product or in this operation manual must 
    be observed.
    Failure to observe these warnings and 
    cautions provided to guard against hazards 
    may result in injury or accident.
    Read this operation manual carefully to 
    familiarize yourself with its contents and 
    ensure that you can operate the product 
    properly.
    Also, store this manual in a safe place where 
    it can easily be referenced whenever required.
    This operation manual uses the following 
    symbols and terms to identify hazards to 
    protect you and others by preventing the 
    occurrence of accidents.
     WARNIN G
    This indicates a potentially hazardous 
    situation which, if not heeded, may result in 
    death or serious injury to you or others. Be 
    sure to heed all warning notices to ensure 
    safe operation at all times.
     CAU TIO N
    Indicates hazardous situations which, if not 
    heeded, may result in minor or moderate 
    injury to you or other persons, or damage to 
    your property.
    NOTE
    Emphasizes essential information which, if not 
    heeded, may render the product unworkable 
    or cause it to function improperly.
    Also, provides helpful information for 
    operation.
    HANDLING THE 
    PRODUCT
     WARNIN G
    1.  Do not stare at the sun or other source of 
    high-intensity light through the lens. Doing 
    so could injure your eyes.
     CAU TIO N
    1.  Make sure all mountings are tightened 
    securely. If any of these mountings 
    becomes loose, the lens may fall, possibly 
    causing injury.
    2.  Inspect all mountings periodically (about 
    every 6 months to 1 year) to make sure 
    they are securely tightened, and tighten 
    any loose parts. Otherwise, the lens may 
    fall, possibly causing injury.
    3.  If it becomes necessary to repair this 
    product, or to perform any operations or 
    adjustments not mentioned in this operation 
    manual, contact Canon’s representative or 
    the dealer who originally supplied the lens.
    NOTE
    1. Protect the lens from strong impacts or 
    shocks. Striking or dropping the lens may 
    result in a malfunction.
    2.  Do not bring the lens, kept in a very cold 
    ambient temperature, into a warm room, 
    because the lens may fog on the inside or 
    condensation may occur.  
    In these cases, the lens cannot be used 
    until these problems clear.  
    If the lens must be used under such 
    conditions, countermeasures are 
    recommended. 
    						
    							45
    TO THE CUSTOMER
    1. Canon shall bear no responsibility for 
    damage resulting from improper operation 
    of this product by the customer.
    2.  Canon shall make no guarantees about 
    the product quality, functions, or operation 
    manual and its marketability and suitability 
    for the customer’s purpose. 
    Moreover, Canon shall bear no 
    responsibility for any damage, direct or 
    incidental, that results from usage for the 
    customer’s purpose.
    3.  Canon shall make no guarantees about the 
    results obtained using this product.
    4.  The product specifications, configuration, 
    and appearance are subject to change 
    without prior notice.
    5.  For further information on repairs, 
    maintenance, or adjustments not 
    mentioned in this operation manual, 
    contact your Canon dealer or your Canon 
    sales representative.
    6.  Note that Canon may be unable to 
    undertake servicing or repair of a product 
    if it is modified without consulting Canon or 
    your Canon sales representative.
    MAINTENANCE AND 
    INSPECTION
    NOTE
    1. Gently blow or brush away dust or dirt on 
    the lens surface using a lens blower or a 
    soft lens brush. Remove any fingerprints or 
    other stains with a soft clean cotton cloth 
    moistened with commercially available lens 
    cleaning fluid or lens cleaning paper. 
    Be careful not to rub dust across the lens, 
    as the lens surface may be scratched.
    2.  A periodic inspection about once a year is 
    recommended. 
    The inspection and maintenance interval 
    depends on the operating conditions, the 
    frequency of use, and the environment. If 
    required, overhaul the lens.
    STORAGE
     CAU TIO N
    1.  Always attach the lens cap (or hood 
    cap) and the dust cap before storing the 
    lens. Storing the lens without these caps 
    attached may present a fire hazard. (Very 
    bright light, such as sunlight, may be 
    focused by the lens and cause a fire.)
    NOTE
    1. If the lens becomes damp because of 
    use in fog, mist, or drizzle, wipe off the 
    moisture with a soft dry cloth and seal the 
    lens together with an effective desiccant 
    in a vinyl bag to remove moisture that has 
    entered the interior.
    CANON INC.
    30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
    Canon Europe Ltd
    3 The Square, Stockley Park, Uxbridge, Middlesex, UB11 1ET UK
    All rights reserved. No part of this operation manual may be reproduced or copied in any form or by any 
    means without the written permission of Canon Inc. 
    						
    							67
    Lens capReference Guide
    Operation ManualLens body
    Zoom/focus lever (short)
    Zoom/focus lever (long) Rear lens cap*
    * The shape of the rear lens cap for the SP type differs from the figure above.
    Product Configuration
    Two types of the CN-E30-105mm T2.8 L are available for the positive lock mount (S type) 
    and the Canon EF mount (SP type). Figures in this manual are for the S type lens unless 
    otherwise mentioned.
    Lens body 
    ................................................... 1
    Zoom/focus lever (short)  ............................1
    Zoom/focus lever (long)  ..............................1
    Attachment holder  ...................................... 1Lens cap 
    ..................................................... 1
    Rear lens cap  ............................................. 1
    Operation Manual  ....................................... 1
    Reference Guide  ........................................ 1
    Attachment holder 
    						
    							67
    Names of Parts
    Focus drive gear
    Number of teeth: 133
    Module: 0.8 metric module
    P.C.D.: 106.4 mm
    Angular rotation: 300°Zoom drive gear
    Number of teeth: 111
    Module: 0.8 metric module
    P.C.D.: 88.8 mm
    Angular rotation: 93.5°Iris drive gear
    Number of teeth: 111
    Module: 0.8 metric module
    P.C.D.: 88.8 mm
    Angular rotation: 55°
    Lens holder
    Attachment holder F.B. adjuster 
    cover
    EF mount (S type)
    Zoom/focus levers PL mount (SP type) 
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon lens CNE30105mm T28 L SP User Manual