Canon IXUS 155 User Manual
Have a look at the manual Canon IXUS 155 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
51 Still ImagesMovies Adjusting White Balance By adjusting white balance (WB), you can make image colors look more natural for the scene you are shooting. zzPress the button, choose [] in the menu, and choose the desired option (= 22). zzThe option you configured is now displayed. Auto Automatically sets the optimal white balance for the shooting conditions. Day Light For shooting outdoors in fair weather. Cloudy For shooting in cloudy conditions, in the shade, or at twilight. TungstenFor shooting under ordinary incandescent (tungsten) lighting and similarly colored fluorescent lighting. FluorescentFor shooting under warm-white (or similarly colored) or cool- white fluorescent lighting. Fluorescent HFor shooting under daylight fluorescent and similarly colored fluorescent lighting. Custom For manually setting a custom white balance ( = 51). Still ImagesMovies Custom White BalanceFor image colors that look natural under the light in your shot, adjust \ white balance to suit the light source where you are shooting. Set the white balance under the same light source that will illuminate your shot. zzFollow the steps in “Adjusting White Balance” (= 51) to choose []. zzAim the camera at a plain white subject, so that the entire screen is white. Press the button. zzThe tint of the screen changes once the white balance data has been recorded. • Colors may look unnatural if you change camera settings after recording white balance data. Before Use Basic Guide Advanced Guide Camera Basics Auto Mode Other Shooting Modes P Mode Playback Mode Setting Menu Accessories Appendix Index Before Use Basic Guide Advanced Guide Camera Basics Auto Mode Other Shooting Modes P Mode Playback Mode Setting Menu Accessories Appendix Index
52 Shooting Range and Focusing Still Images Shooting Close-Ups (Macro) To restrict the focus to subjects at close range, set the camera to [e]. For details on the focusing range, see “Shooting Range” (= 11 4). zzPress the button, choose [] in the menu, and then choose the [ e] option (= 22). zzOnce the setting is complete, [e] is displayed. • If the flash fires, vignetting may occur. • In the yellow bar display area below the zoom bar, [e] will turn gray and the camera will not focus. • To prevent camera shake, try mounting the camera on a tripod and shooting\ with the camera set to [[] (= 32). Still Images Shooting Distant Subjects (Infinity) To restrict the focus to distant subjects, set the camera to [u]. For details on the focusing range, see “Shooting Range” ( = 11 4). zzPress the button, choose [] in the menu, and then choose the [ u] option (= 22). zzOnce the setting is complete, [u] is displayed. Still ImagesMovies Changing the AF Frame Mode Change the AF (auto focus) frame mode to suit the shooting conditions as follows. zzPress the button, choose [AF Frame] on the [4] tab, and then choose the desired option ( = 23). Before Use Basic Guide Advanced Guide Camera Basics Auto Mode Other Shooting Modes P Mode Playback Mode Setting Menu Accessories Appendix Index Before Use Basic Guide Advanced Guide Camera Basics Auto Mode Other Shooting Modes P Mode Playback Mode Setting Menu Accessories Appendix Index
53 Still ImagesMovies Face AiAF • Detects people’s faces, and then sets the focus, exposure (evaluative metering only), and white balance ([] only). • After you aim the camera at the subject, a white frame is displayed around the person’s face determined by the camera to be the main subject, and up to two gray frames are displayed around other detected faces. • When the camera detects movement, frames will follow moving subjects, within a certain range. • After you press the shutter button halfway, up to nine green frames are displayed around faces in focus. • If faces are not detected, or when only gray frames are displayed (without a white frame), up to nine green frames are displayed in the \ areas in focus when you press the shutter button halfway. • If faces are not detected when Servo AF (= 54) is set to [On], the AF frame is displayed in the center of the screen when you press the shutter button halfway. • Examples of faces that cannot be detected: - Subjects that are distant or extremely close - Subjects that are dark or light - Faces in profile, at an angle, or partly hidden • The camera may misinterpret non-human subjects as faces. • No AF frames are displayed if the camera cannot focus when you press the shutter button halfway. Still Images Choosing Subjects to Focus On (Tracking AF)Shoot after choosing a subject to focus on as follows. 1 Choose [Tracking AF]. zzFollow the steps in “Changing the AF Frame Mode” (= 52) to choose [Tracking AF]. zz[] is displayed in the center of the screen. 2 Choose a subject to focus on. zzAim the camera so that [] is on the desired subject. zzPress the shutter button halfway. [] changes to a blue [], which follows the subject as the camera continues to adjust the focus and exposure (Servo AF) (= 54). 3 Shoot. zzPress the shutter button all the way down to shoot. • [Servo AF] (= 54) is set to [On] and cannot be changed. • Tracking may not be possible when subjects are too small or move too rapidly, or when subject color or brightness matches that of the background too closely. • [AF-Point Zoom] on the [4] tab is not available. • [e] and [u] are not available. Before Use Basic Guide Advanced Guide Camera Basics Auto Mode Other Shooting Modes P Mode Playback Mode Setting Menu Accessories Appendix Index Before Use Basic Guide Advanced Guide Camera Basics Auto Mode Other Shooting Modes P Mode Playback Mode Setting Menu Accessories Appendix Index
54 Still ImagesMovies CenterOne AF frame is displayed in the center. Effective for reliable focusing.• A yellow AF frame is displayed with [ ] if the camera cannot focus when you press the shutter button halfway. • To compose shots so that subjects are positioned at the edge or in a corn\ er, first aim the camera to capture the subject in an AF frame, and then hold the shutter button halfway down. As you continue to hold the shutter button halfway, recompose the shot as desired, and then press the shutter button all the way down (Focus Lock). Still Images Shooting with Servo AFThis mode helps avoid missing shots of subjects in motion, because the camera continues to focus on the subject and adjust the exposure as long\ as you press the shutter button halfway. 1 Configure the setting. zzPress the button, choose [Servo AF] on the [ 4] tab, and then choose [On] (= 23). 2 Focus. zzThe focus and exposure are maintained where the blue AF frame is displayed while you are pressing the shutter button halfway. • Focusing may not be possible in some shooting conditions. • In low-light conditions, Servo AF may not be activated (AF frames may not turn blue) when you press the shutter button halfway. In this case, the focus and exposure are set according to the specified AF frame mode. • If adequate exposure cannot be obtained, shutter speeds and aperture values are displayed in orange. Release the shutter button, and then press it halfway again. • AF lock shooting is not available. • [AF-Point Zoom] on the [4] tab is not available. • Not available when using the self-timer ( = 32). Before Use Basic Guide Advanced Guide Camera Basics Auto Mode Other Shooting Modes P Mode Playback Mode Setting Menu Accessories Appendix Index Before Use Basic Guide Advanced Guide Camera Basics Auto Mode Other Shooting Modes P Mode Playback Mode Setting Menu Accessories Appendix Index
55 Still Images Magnifying the Area in Focus You can check the focus by pressing the shutter button halfway, which will enlarge the portion of the image in focus in the AF frame. 1 Configure the setting. zzPress the button, choose [AF- Point Zoom] on the [4] tab, and then choose [On] (= 23). 2 Check the focus. zzIn [Face AiAF] AF mode, the face detected as the main subject is magnified when the shutter button is pressed halfway. In [Center] AF mode, the AF frame in the center is magnified. • The area in focus is not magnified in the following cases when the shutter button is pressed halfway. - [Face AiAF]: When a face was not detected, or when the person is too close to the camera and their face is too large for the screen - [Center]: When the camera cannot focus on the subject - [Tracking AF]: Not magnified in this mode - Digital zoom ( = 31): Not magnified with this feature Still Images Changing the Focus Setting You can change default camera operation of constantly focusing on subjects it is aimed at, even when the shutter button is not pressed. In\ stead, you can limit camera focusing to the moment you press the shutter button\ halfway. zzPress the button, choose [Continuous AF] on the [ 4] tab, and then choose [Off] ( = 23). OnHelps avoid missing sudden photo opportunities, because the camera constantly focuses on subjects until you press the shutter button halfwa\ y. Off Conserves battery power, because the camera does not focus constantly. Before Use Basic Guide Advanced Guide Camera Basics Auto Mode Other Shooting Modes P Mode Playback Mode Setting Menu Accessories Appendix Index Before Use Basic Guide Advanced Guide Camera Basics Auto Mode Other Shooting Modes P Mode Playback Mode Setting Menu Accessories Appendix Index
56 Still ImagesMovies Shooting with the AF Lock The focus can be locked. After you lock the focus, the focal position will not change even when you release your finger from the shutter button. 1 Lock the focus. zzWith the shutter button pressed halfway, press the button. zzThe focus is now locked, and [%] is displayed. zzTo unlock the focus, release the shutter button and press the button again. In this case, [%] is no longer displayed. 2 Compose the shot and shoot. Flash Still Images Changing the Flash Mode You can change the flash mode to match the shooting scene. For details on the flash range, see “Flash Range” ( = 11 4). zzPress the button, press the buttons to choose a flash mode, and then press the button. zzThe option you configured is now displayed. [] AutoFires automatically in low-light conditions. [h] OnFires for each shot. [Z] Slow SynchroFires to illuminate the main subject (such as people) while shooting a\ t a slower shutter speed to illuminate backgrounds out of flash range. • In [Z] mode, mount the camera on a tripod or take other measures to keep it still and prevent camera shake. • In [Z] mode, even after the flash fires, ensure that the main subject does not move until the shutter sound is finished playing. IXUS 155 IXUS 150• Set [IS Mode] to [Off] when using a tripod or other means to secure the camera (= 59). Before Use Basic Guide Advanced Guide Camera Basics Auto Mode Other Shooting Modes P Mode Playback Mode Setting Menu Accessories Appendix Index Before Use Basic Guide Advanced Guide Camera Basics Auto Mode Other Shooting Modes P Mode Playback Mode Setting Menu Accessories Appendix Index
57 [!] OffFor shooting without the flash.• If a blinking [ ] icon is displayed when you press the shutter button halfway in camera-shake inducing, low-light conditions, mount the camera on a tripod or take other measures to keep it still. Still Images Shooting with the FE Lock Just as with the AE lock (= 49), you can lock the exposure for the flash shots. 1 Set the flash to [h] (= 5 6 ). 2 Lock the flash exposure. zzAim the camera at the subject to shoot with the exposure locked. With the shutter button pressed halfway, press the button. zzThe flash fires, and when [(] is displayed, the flash output level is retained. zzTo unlock FE, release the shutter button and press the button again. In this case, [(] is no longer displayed. 3 Compose the shot and shoot. • FE: Flash Exposure Using Eco Mode This function allows you to conserve battery power in Shooting mode. When the camera is not in use, the screen quickly darkens to reduce battery consumption. 1 Configure the setting. zzPress the button, and then press the buttons to choose []. zz[] is now shown on the shooting screen (= 103). zzThe screen darkens when the camera is not used for approximately two seconds; approximately ten seconds after darkening, the screen turns off. The camera turns off after approximately three minutes of inactivity. 2 Shoot. zzTo activate the screen and prepare for shooting when the screen is off but the lens is still out, press the shutter button halfway. Before Use Basic Guide Advanced Guide Camera Basics Auto Mode Other Shooting Modes P Mode Playback Mode Setting Menu Accessories Appendix Index Before Use Basic Guide Advanced Guide Camera Basics Auto Mode Other Shooting Modes P Mode Playback Mode Setting Menu Accessories Appendix Index
58 Other Settings Still ImagesMovies Displaying Grid Lines Grid lines can be displayed on the screen for vertical and horizontal reference while shooting. zzPress the button, choose [Grid Lines] on the [4] tab, and then choose [On] (= 23). zzOnce the setting is complete, grid lines are displayed on the screen. • Grid lines are not recorded in your shots. Still ImagesMovies Deactivating the Digital Zoom If you prefer not to use the digital zoom (= 31), you can deactivate it as follows. zzPress the button, choose [Digital Zoom] on the [4] tab, and then choose [Off] ( = 23). Still Images Changing the Image Display Style after Shots You can change how long images are displayed and what information is displayed immediately after shooting. Changing the Image Display Period after Shots 1 Access the [Review image after shooting] screen. zzPress the button, choose [Review image after shooting] on the [4] tab, and then press the button (= 23). 2 Configure the setting. zzChoose [Display Time], and then choose the desired option ( = 23). Quick Displays images only until you can shoot again. 2 sec., 4 sec., 8 sec. Displays images for the specified time. Even while the shot is displayed, you can take another shot by pressing the shutter button halfway again. Hold Displays images until you press the shutter button halfway. Off No image display after shots. Before Use Basic Guide Advanced Guide Camera Basics Auto Mode Other Shooting Modes P Mode Playback Mode Setting Menu Accessories Appendix Index Before Use Basic Guide Advanced Guide Camera Basics Auto Mode Other Shooting Modes P Mode Playback Mode Setting Menu Accessories Appendix Index
59 Changing the Screen Displayed after ShotsChange the way images are displayed after shots as follows. 1 Set [Display Time] to [2 sec.], [4 sec.], [8 sec.], or [Hold] (= 5 8). 2 Configure the setting. zzChoose [Display Info], and then choose the desired option ( = 23). OffDisplays only the image. Detailed Displays shooting details ( = 104). • When [Display Time] (= 58) is set to [Off] or [Quick], [Display Info] is set to [Off] and cannot be changed. • By pressing the button while an image is displayed after shooting, you can switch the display information. Note that the settings of [Display I\ nfo] are not changed. You can also erase images by pressing the < o> button, or protect images (= 66) by pressing the button. IXUS 155 IXUS 150 Still ImagesMovies Changing the IS Mode Settings 1 Access the setting screen. zzPress the button, choose [IS Settings] on the [4] tab, and then press the button (= 23). 2 Configure the setting. zzChoose [IS Mode], and then choose the desired option ( = 23). ContinuousOptimal image stabilization for the shooting conditions is automatically\ applied (Intelligent IS) ( = 29). Shoot Only* Image stabilization is active only at the moment of shooting. Off Deactivates image stabilization. * The setting is changed to [Continuous] for movie recording. • If image stabilization cannot prevent camera shake, mount the camera on a tripod or take other measures to hold it still. In this case, set [IS Mode] to [Off]. Before Use Basic Guide Advanced Guide Camera Basics Auto Mode Other Shooting Modes P Mode Playback Mode Setting Menu Accessories Appendix Index Before Use Basic Guide Advanced Guide Camera Basics Auto Mode Other Shooting Modes P Mode Playback Mode Setting Menu Accessories Appendix Index
60 IXUS 155 IXUS 150Movies Shooting Movies with Subjects at the Same Size Shown before ShootingNormally, once movie recording begins, the image display area changes and subjects are enlarged to allow for correction of significant camera shake. To shoot subjects at the same size shown before shooting, you can choose not to reduce significant camera shake. zzFollow the steps in “Changing the IS Mode Settings” (= 59) to access the [IS Settings] screen. zzChoose [Dynamic IS], and then choose [2] (= 23). • You can also set [IS Mode] to [Off], so that subjects are recorded at the same size shown before shooting. Before Use Basic Guide Advanced Guide Camera Basics Auto Mode Other Shooting Modes P Mode Playback Mode Setting Menu Accessories Appendix Index Before Use Basic Guide Advanced Guide Camera Basics Auto Mode Other Shooting Modes P Mode Playback Mode Setting Menu Accessories Appendix Index