Canon Ixus 150 User Guide

							11
Initial Preparations
Prepare for shooting as follows.
Attaching the Strap
zzThread the end of the strap through the 
strap hole (), and then pull the other 
end of the strap through the loop on the 
threaded end (
).
Holding the Camera
zzPlace the strap around your wrist.
zzWhen shooting, keep your arms close to 
your body and hold the camera securely 
to prevent it from moving. Do not rest 
your fingers on the flash.
Charging the Batter y Pack
Before use, charge the battery pack with the included charger. Be sure to 
charge the battery pack initially, because the camera is not sold with the 
battery pack charged.
1	 Insert	the	battery	pack.
zzAfter aligning the   marks on the battery 
pack and charger, insert the battery pack 
by pushing it in (
) and down ().
2	 Charge	the	battery	pack.
zzCB-2LF: Flip out the plug () and plug 
the charger into a power outlet ().
zzCB-2LFE: Plug the power cord into the 
charger, then plug the other end into a 
power outlet.
zzThe charging lamp turns orange, and 
charging begins.
zzWhen charging is finished, the lamp turns 
green.
3	 Remove	the	battery	pack.
zzAfter unplugging the battery charger, 
remove the battery pack by pushing it in 
(
) and up ().
CB-2LF
CB-2LFE
 
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index  
						

							12
•	To protect the battery pack and keep it in optimal condition, do not 
charge it continuously for more than 24 hours.
•	 For battery chargers that use a power cord, do not attach the 
charger or cord to other objects. Doing so could result in malfunction 
or damage to the product.
•	 For details on charging time and the number of shots and recording time \
possible with a fully charged battery pack, see “Number of Shots/Reco\
rding 
Time, Playback Time” (=
  11 2 ).
•	 Charged battery packs gradually lose their charge, even when they are no\
t 
used. Charge the battery pack on (or immediately before) the day of us\
e.
•	 The charger can be used in areas with 100 – 240
 V AC power (50/60 Hz). 
For power outlets in a different format, use a commercially available adapter 
for the plug. Never use an electrical transformer designed for traveling\
, which 
may damage the battery pack.
Inserting the Batter y Pack and Memor y Card
Insert the included battery pack and a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted 
in another device), you should format the memory card with this camera \
(=
  76).
1	 Open	the	cover.
zzSlide the cover () and open it ().
2	 Insert	the	battery	pack.
zzWhile pressing the battery lock in the 
direction of the arrow, insert the battery 
pack as shown and push it in until it clicks 
into the locked position.
Terminals Battery Lock
 
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index  
						

							13
3	 Check	the	card’s	write-protect	tab	and	insert	the	memory	card.
zzRecording is not possible on memory 
cards with a write-protect tab when the 
tab is in the locked position. Slide the tab 
to the unlocked position.
zzInsert the memory card facing as shown 
until it clicks into the locked position.
zzMake sure the memory card is facing the 
right way when you insert it. Inserting 
memory cards facing the wrong way may 
damage the camera.
4	 Close	the	cover.
zzLower the cover () and hold it down as 
you slide it, until it clicks into the closed 
position (
).
zzIf the cover will not close, make sure you 
inserted the battery pack facing the right 
way in step 2.
•	 For guidelines on how many shots or hours of recording can be saved on o\
ne 
memory card, see “Number of Shots per Memory Card” ( =  11 3).
Removing	the	Battery	Pack	and	Memory	Card
Remove
	the	battery	pack.
zzOpen the cover and press the battery 
lock in the direction of the arrow.
zzThe battery pack will pop up.
Label
Remove	the	memory	card.
zzPush the memory card in until it clicks, 
and then slowly release it.
zzThe memory card will pop up.
Setting the Date and Time
Set the current date and time correctly as follows if the [Date/Time] screen 
is displayed when you turn the camera on. Information you specify this w\
ay 
is recorded in image properties when you shoot, and it is used when you \
manage images by shooting date or print images showing the date.
You can also add a date stamp to shots, if you wish ( =
  34).
1	 Turn	the	camera	on.
zzPress the ON/OFF button.
zzThe [Date/Time] screen is displayed.
2	 Set	the	date	and	time.
zzPress the  buttons to choose an 
option.
zzPress the  buttons to specify 
the date and time.
zzWhen finished, press the  button.
 
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index      
						

							14
3	 Set	the	home	time	zone.
zzPress the  buttons to choose 
your home time zone.
4	 Finish	the	setup	process.
zzPress the  button to complete the 
setting. The setting screen is no longer 
displayed.
zzTo turn off the camera, press the ON/OFF 
button.
•	 Unless you set the date, time, and home time zone, the [Date/Time] 
screen will be displayed each time you turn the camera on. Specify 
the correct information.
•	 To set daylight saving time (1 hour ahead), choose [] in step 2 and then 
choose [] by pressing the  buttons.
Changing	the	Date	and	TimeAdjust the date and time as follows.
1	 Access	the	camera	menu.
zzPress the  button.
2	 Choose	[Date/Time].
zzMove the zoom lever to choose the [ 3] 
tab.
zzPress the  buttons to choose 
[Date/Time], and then press the  
button.
3	 Change	the	date	and	time.
zzFollow step 2 in “Setting the Date and 
Time” (=  13) to adjust the settings.
zzPress the  button to close the 
menu.
•	 Date/time settings can be retained for about 3 weeks by the camera’s built-in 
date/time battery (backup battery) after the battery pack is removed.
•	 The date/time battery will be charged in about 4 hours once you insert a\
 
charged battery pack or connect the camera to an AC adapter kit (sold 
separately, =
  82), even if the camera is left off.
•	 Once the date/time battery is depleted, the [Date/Time] screen will be 
displayed when you turn the camera on. Set the correct date and time as \
described in “Setting the Date and Time” (=
  13).
 
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index      
						

							15
Still ImagesMovies
Tr ying the Camera Out
Follow these instructions to turn the camera on, shoot still images or 
movies, and then view them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes, 
simply let the camera determine the subject and shooting conditions.
1	 Turn	the	camera	on.
zzPress the ON/OFF button.
zzThe startup screen is displayed.
2	 Enter	[]	mode.
zzPress the  button several times until 
[] is displayed.
zzAim the camera at the subject. The 
camera will make a slight clicking noise 
as it determines the scene.
IXUS 155 IXUS 150
zzIcons representing the scene and image 
stabilization mode are displayed in the 
upper right of the screen.
IXUS 145
zzA scene icon is displayed in the upper 
right of the screen.
zzFrames displayed around any detected 
subjects indicate that they are in focus.
Display Language
Change the display language as needed.
1	 Enter	Playback	mode.
zzPress the  button.
2	 Access	the	setting	screen.
zzPress and hold the  button, and 
then press the  button.
3	 Set	the	display	language.
zzPress the  buttons to 
choose a language, and then press the 
 button.
zzOnce the display language has been set, 
the setting screen is no longer displayed.
•	 You can also change the display language by pressing the < n> button 
and choosing [Language ] on the [3] tab.
 
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index       
						

							16
3	 Compose	the	shot.
zzTo zoom in and enlarge the subject, move 
the zoom lever toward  (telephoto), 
and to zoom away from the subject, move 
it toward  (wide angle).
4	 Shoot.
Shooting
	Still	Images
Focus.
zzPress the shutter button lightly, halfway 
down. The camera beeps twice after 
focusing, and AF frames are displayed to 
indicate image areas in focus.
Shoot.
zzPress the shutter button all the way 
down.
zzAs the camera shoots, a shutter sound 
is played, and in low-light conditions, the 
flash fires automatically.
zzKeep the camera still until the shutter 
sound ends.
zzAfter displaying your shot, the camera will 
revert to the shooting screen.
Shooting	Movies
Start	shooting.
zzPress the movie button. The camera 
beeps once as recording begins, and 
[
Rec] is displayed with the elapsed time.
IXUS 155 IXUS 150
zzBlack bars are displayed on the top and 
bottom edges of the screen, and the 
subject is slightly enlarged. The black 
bars indicate image areas not recorded.
IXUS 145
zzBlack bars displayed on the top and 
bottom edges of the screen indicate 
image areas not recorded.
zzFrames displayed around any detected 
faces indicate that they are in focus.
zzOnce recording begins, take your finger 
off the movie button.
Finish	shooting.
zzPress the movie button again to stop 
shooting. The camera beeps twice as 
recording stops.
Elapsed Time
 
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index  
						

							17
Viewing
After shooting images or movies, you can view them on the screen as 
follows.
1 Enter Playback mode.
zzPress the  button.
zzYour last shot is displayed.
2 Browse through your images.
zzTo view the previous image, press the 
 button. To view the next image, 
press the  button.
zzPress and hold the  buttons to 
browse through images quickly.
zzMovies are identified by a [] icon. To 
play movies, go to step 3.
3 Play movies.
zzPress the  button, press the 
 buttons to choose [], and 
then press the  button again.
zzPlayback now begins, and after the movie 
is finished, [] is displayed.
zzTo adjust the volume, press the  
buttons.
•	To switch to Shooting mode from Playback mode, press the shutter button h\
alfway.
Erasing ImagesYou can choose and erase unneeded images one by one. Be careful when 
erasing images, because they cannot be recovered.
1 Choose an image to erase.
zzPress the  buttons to choose an 
image.
2 Erase the image.
zzPress the  button.
zzAfter [Erase?] is displayed, press the 
 buttons to choose [Erase], and 
then press the  button.
zzThe current image is now erased.
zzTo cancel erasure, press the < q> 
buttons to choose [Cancel], and then 
press the  button.
•	 You can also erase all images at once ( =  68).
 
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index       
						

							18
Still ImagesMovies
Accessing the Help Menu
Access on-screen descriptions of scenes detected by the camera, shooting\
 
advice, and playback instructions as follows.
zzPress the  button to access the Help 
menu.
zzPress the  button again to return to 
the original display.
zzIn Shooting mode, a description of 
the scene detected by the camera 
is displayed. Shooting advice is also 
displayed depending on the scene.
zzIn Playback mode, press the  
buttons and choose an item. The 
zoom lever and buttons are displayed 
overlaying the illustration of the camera.
zzChoose an item and press the < r> 
button. An explanation of the item is 
displayed. To continue reading the 
explanation, press the < o> buttons 
to scroll up or down the screen. Press 
the  button to return to the left hand 
screen.
•	 The Help menu can also be used in shooting modes other than [], and in 
those modes it will display the same as when in Playback mode.
 
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index  
						

							19
Advanced Guide
Camera Basics
Other basic operations and more ways to enjoy your camera, including sho\
oting and playback options
On/Off	................................................................20Power-Saving Features (Auto Power Down) ........20Shutter	Button	.................................................. 21
Shooting
	Display	Options	............................... 21Using
	the	FUNC.	Menu	....................................
22
Using
	Menus	..................................................... 23
Indicator
	Display	.............................................. 24
 
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index  
						

							20
On/Off
Shooting	Mode
zzPress the ON/OFF button to turn the 
camera on and prepare for shooting.
zzTo turn the camera off, press the ON/OFF 
button again.
Playback	Mode
zzPress the  button to turn the camera 
on and view your shots.
zzTo turn the camera off, press the  
button again.
•	To switch to Playback mode from Shooting mode, press the < 1> button.
•	 To switch to Shooting mode from Playback mode, press the shutter button 
halfway (=
  21).
•	 The lens will be retracted after about one minute once the camera is in \
Playback mode. You can turn the camera off when the lens is retracted by 
pressing the < 1> button.
Power-Saving Features (Auto Power Down)
As a way to conserve battery power, the camera automatically deactivates 
the screen (Display Off) and then turns itself off after a specific period of 
inactivity.
Power	Saving	in	Shooting	ModeThe screen is automatically deactivated after about one minute of inacti\
vity. 
In about two more minutes, the lens is retracted and the camera turns it\
self 
off. To activate the screen and prepare for shooting when the screen is off 
but the lens is still out, press the shutter button halfway ( =
  21).
Power	Saving	in	Playback	ModeThe camera turns itself off automatically after about five minutes of 
inactivity.
•	You can deactivate Auto Power Down and adjust the timing of Display Off, if 
you prefer (=  75).
•	 Power saving is not active while the camera is connected to a computer 
(=
  87).
 
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index