Canon Ir1024f Quick Start Guide

							
3Open the package of the new drum unit and 
remove the protective packing material (A).
4Hold the unit by its grips on both sides.
5Align the   marks on both sides of the drum 
unit (B) with the   marks on the machine (A), 
and push the unit into the machine as far as it 
will go.
CAUTION
Do not touch the fixing assembly as it becomes very hot 
during use.
6After the unit is completely inserted, remove 
the orange paper.
7Close the left cover.
CAUTION
– Be careful not to get your fingers caught.
– Do not touch the portion (A) as the image quality of  printouts may deteriorate.
A
BB
A
AA
50
 
						

							
51
Clearing Jams
When a jam occurs in the machine, the paper 
jam message appears on the LCD display. 
Check the jam location indicator where the jam 
occurs, then remove the jammed paper.

CAUTION
– When removing jammed documents or paper, take care not  to cut your hands on the edges of the document or paper.
– When removing jammed paper or when inspecting the inside 
of the machine, do not allow necklaces, bracelets, or other 
metal objects to touch the inside of the machine, as this may 
result in burns or electrical shock.

NOTE
Do not force a jammed document or paper out of the machine. 
Contact your local authorized Canon dealer for assistance if 
needed.
Document Jams
When  or  appears on the LCD display, remove 
a jammed document from the ADF or the document 
delivery slot.
1Open the ADF cover.
2Remove any jammed documents.

NOTE
Do not pull the document forcefully as it may tear.
 
						

							
3Lift the document feeder tray.
4Remove any jammed documents.
5Lower the document feeder tray and close the 
ADF cover.
CAUTION
Be careful not to get your fingers caught.
6Open the ADF/platen glass cover, and remove 
any jammed documents.
7Close the ADF/platen glass cover.
CAUTION
Be careful not to get your fingers caught.
52
 
						

							
53
Paper Jams
When  appears on the LCD display, 
remove jammed paper from inside the machine 
first, then from the paper drawer if necessary. 
Check the following if you experience repeated 
paper jams:
– Even the edge of the paper stack by a flat surface before loading it in the machine.
– Check that the paper you are using meets the  requirements for use. (See Chapter 3, “Print 
Media,” in the Basic Operation Guide.)
– Make sure you have removed any scraps of  paper from inside the machine.
1Open the left cover.
2Carefully pull the jammed paper out of the 
machine.

CAUTION
– Do not touch the fixing assembly (A) as it becomes  very hot during use.
– If you tear the paper, remove any torn pieces to avoid 
further jams.
– If loose toner comes into contact with your skin or  clothing, wash with cold water. Warm water will set the 
toner.
3Tilt the 2-sided transport guide (A) toward the 
machine, then remove the jammed paper (Only 
for 2-sided copying).

A

A
 
						

							
4Lift and hold the transcription frame (A), then 
remove the jammed paper (Only for 2-sided 
copying).
5Close the left cover.
CAUTION
Be careful not to get your fingers caught.
6If you use the optional paper drawer, open the 
cover on the left side of the optional paper 
drawer. Remove any jammed paper, then close 
the cover.
7Pull out the paper drawer and push the corners 
of the stack under the tabs.
8Gently push the paper drawer back into the 
machine until it clicks.
CAUTION
Be careful not to get your fingers caught.
A
54
 
						

							
55
Important Safety Instructions
The following symbols are used throughout the manuals for the 
machine and indicate the warnings, cautions and notes you should 
keep in mind when using the machine.

WARNING
Indicates a warning that may lead to death or serious injury if 
not observed.

CAUTION
Explains how to avoid actions that could injure you or damage 
your machine.

NOTE
Explains operating restrictions and how to avoid minor 
difficulties.
Handling and Maintenance
– Follow all warnings and instructions marked on the machine.
– Do not subject the machine to strong physical shocks or vibrations.
– Always unplug the machine before moving or cleaning it.
– To avoid paper jams, never unplug the power cord, open the left  cover, or add or remove paper in the machine while printing.
– Always grip the handle on the sides of the machine when you lift the 
machine. Never lift the machine by any of its trays or attachments.
– Do not insert any objects into the slots or openings on the machine  since they may touch dangerous voltage points or short out parts. 
This could result in fire or electric shock.
– Do not allow small objects (such as pins, paper clips, or staples) to  fall into the machine. If something does fall into it, unplug the 
machine immediately and contact your local authorized Canon 
dealer.
– To avoid spillage in or around the machine, do not eat or drink near 
it. If you spill liquid or if any substance falls into it, unplug the power 
cord immediately and contact your local authorized Canon dealer.
– Keep the machine clean. Dust accumulation can prevent the 
machine from operating properly.
– Toner cartridge for this machine will be available for at least seven  (7) years (or any such longer period as required by applicable laws) 
after production of this machine model has been discontinued.
– Unplug the machine from the wall outlet and contact your local  authorized Canon dealer in any of the following cases:
– When the power cord or plug is damaged or frayed.
– If liquid has spilled into the machine.
– If the machine has been exposed to rain or water.
– If the machine does not operate normally when you have followed 
the instructions in this guide. Adjust only those controls that are 
covered by the instructions in this guide. Improper adjustment of 
other controls may result in damage and may require extensive 
work by a qualified technician to restore the product to normal 
operation.
– If the machine has been dropped.
– If the machine exhibits a distinct change in performance,  indicating a need for servicing.
– Do not place your hands, hair, clothing, etc., near the exit and  feed rollers. Even if the machine is not in operation, your hands, 
hair, or clothing may get caught in the rollers, which may result in 
personal injury or damage if the machine suddenly starts printing.
– Be careful when removing printed paper from paper delivery tray  or when aligning it, because it may be hot and result in burn injury. Location
– Place the machine on a flat, stable, vibration-free surface that is 
strong enough to support its weight.
– Place the machine in a cool, dry, clean, well ventilated place.
– Make sure the area is free from dust.
– Make sure the location is not exposed to high temperature or  humidity.
– Keep the machine away from direct sunlight as this can damage it. If  you have to place it near a window, install heavy curtains or blinds.
– Do not use the machine near water. Make sure that no wet or humid 
objects come into contact with the machine.
– Do not use or store the machine outdoors.
– Do not install the machine near devices that contain magnets or  generate magnetic fields, such as speakers.
– If possible, place the machine near an existing telephone line outlet  for easy connection of the telephone line cord, and to avoid the 
expense of installing a new outlet.
– Place the machine near a standard 220–240 V AC (50/60 Hz) power  outlet.
– To ensure reliable operation of the machine and to protect it from  overheating (which can cause it to operate abnormally and create a 
fire risk), do not block the exhaust vent. Never block or cover any 
openings on the machine by placing it on a bed, sofa, rug, or other 
similar surface. Do not place the machine in a cupboard or built-in 
installation, or near a radiator or other heat source unless proper 
ventilation is provided. Leave enough space around all sides of the 
machine, and make sure that the clearance between the machine’s 
ventilation slot and wall or other equipment is more than 5 cm.
– Do not stack boxes or furniture around the power outlet. Keep the  area free so you can reach the outlet quickly. If you notice anything 
unusual (smoke, strange odors, noises) around the machine, unplug 
the power cord immediately. Contact your local authorized Canon 
dealer.
– Do not allow anything to rest on the power cord, and do not place 
the machine where the cord will be walked on. Make sure the cord is 
not knotted or kinked.

WARNING
Except as specifically described in the manuals of the 
machine, do not attempt to service the machine yourself. 
Never attempt to disassemble the machine: opening and 
removing its interior covers will expose you to dangerous 
voltages and other risks. For all service, contact your local 
authorized Canon dealer.
Model Names
F190504 (iR1020J)
F190500 (iR1024A/iR1024i/iR1020)
F190502 (iR1024F/iR1024iF)
 
						

							
Laser Safety Information
Laser radiation could be hazardous to the human body. For this 
reason, laser radiation emitted inside this equipment is hermetically 
sealed within the protective housing and external cover. No radiation 
can leak from the machine in the normal operation of the product by 
the user.
This machine is classified as a Class 1 Laser Product under 
IEC60825-1:1993+A1:1997 +A2:2001, EN60825-1:1994+A1:2002 
+A2:2001
220–240 V Model
The label shown below is attached to the laser scan unit on the 
machine.
This machine has been classified under IEC60825-1:1993+A1:1997 
+A2:2001, EN60825-1:1994+A1:2002 +A2:2001 and conforms to the 
following classes:
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL A RAYONNEMENT LASER DE CLASSE 1
APPARECCHIO LASER DI CLASSE 1
PRODUCTO LASER DE CLASE 1
APARELHO A LASER DE CLASSE 1
CAUTION
Use of controls, adjustments, or performance of procedures 
other than those specified in the manuals for the machine may 
result in hazardous radiation exposure.
Trademarks
Canon, the Canon logo, iR and NetSpot are trademarks of Canon Inc.
Microsoft, Windows, Windows Server and Windows Vista are 
trademarks or registered trademarks of Microsoft Corporation in the 
U.S. and/or other countries.
All other product and brand names are registered trademarks, 
trademarks or service marks of their respective owners.
Copyright
Copyright © 2008 by Canon Inc. All rights reserved. No part of this 
publication may be reproduced, transmitted, transcribed, stored in a 
retrieval system, or translated into any language or computer language 
in any form or by any means, electronic, mechanical, magnetic, 
optical, chemical, manual, or otherwise, without the prior written 
permission of Canon Inc.
UFST:Copyright © 1989-2003 Monotype Imaging, Inc.
WEEE Directive
European Union (and EEA) only.
These symbols indicate that this product is not to be disposed of 
with your household waste, according to the WEEE Directive 
(2002/96/EC), the Battery Directive (2006/66/EC) and/or your 
national laws implementing those Directives.
If a chemical symbol is printed beneath the symbol shown above, 
in accordance with the Battery Directive, this indicates that a heavy 
metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in this 
battery or accumulator at a concentration above an applicable 
threshold specified in the Battery Directive.
This product should be handed over to a designated collection 
point, e.g., on an authorized one-for-one basis when you buy a new 
similar product or to an authorized collection site for recycling 
waste electrical and electronic equipment (EEE) and batteries and 
accumulators. Improper handling of this type of waste could have a 
possible impact on the environment and human health due to 
potentially hazardous substances that are generally associated 
with EEE.
Your cooperation in the correct disposal of this product will 
contribute to the effective usage of natural resources.
For more information about the recycling of this product, please 
contact your local city office, waste authority, approved scheme or 
your household waste disposal service or visit www.canon-
europe.com/environment.
(EEA: Norway, Iceland and Liechtenstein)
This equipment conforms to the essential
requirements of EC Directive 1999/5/EC. (for 
F190502 (iR1024F/iR1024iF))
We declare that this product conforms to the 
EMC requirements of EC Directive 1999/5/EC 
(for F190502 (iR1024F/iR1024iF)) and 2004/
108/EC (for F190504 (iR1020J), F190500 
(iR1020/iR1024A/iR1024i)) at nominal mains 
input 230 V, 50 Hz although the rated input of 
the product is 220–240 V, 50/60 Hz. If you 
move to another EU country and are 
experiencing trouble, please call the Canon 
Help Desk. (For Europe Only)
– Use of shielded cable is necessary to comply with the technical requirements of 
EMC Directive.
As an E
NERGY STA R Partner, Canon Inc. has 
determined that this product meets the 
E
NERGY STA R Program for energy efficiency.
The International E
NERGY STA R Office 
Equipment Program is an international 
program that promotes energy saving through 
the use of computers and other office 
equipment.
The program backs the development and 
dissemination of products with functions that 
effectively reduce energy consumption. It is an 
open system in which business proprietors can 
participate voluntarily.
The targeted products are office equipment, 
such as computers, displays, printers, 
facsimiles, and copiers. The standards and 
logos are uniform among participating nations.
56
 
						

							
57
Disclaimers
The information in this document is subject to change without notice.
CANON INC. MAKES NO WARRANTY OF ANY KIND WITH 
REGARD TO THIS MATERIAL, EITHER EXPRESS OR IMPLIED, 
EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUT 
LIMITATION, THEREOF, WARRANTIES AS TO MARKETABILITY, 
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OF 
USE OR NON-INFRINGEMENT. CANON INC. SHALL NOT BE 
LIABLE FOR ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL 
DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES 
RESULTING FROM THE USE OF THIS MATERIAL.
Legal Limitations on Usage of Your Product and the Use of 
Images
Using your product to scan, print or otherwise reproduce certain 
documents, and the use of such images as scanned, printed or 
otherwise reproduced by your product, may be prohibited by law and 
may result in criminal and/or civil liability. A non-exhaustive list of these 
documents is set forth below. This list is intended to be a guide only. If 
you are uncertain about the legality of using your product to scan, print 
or otherwise reproduce any particular document, and/or of the use of 
the images scanned, printed or otherwise reproduced, you should 
consult in advance with your legal advisor for guidance.
– Paper Money
– Traveler’s Checks
– Money Orders
– Food Stamps
– Certificates of Deposit
–Passports
– Postage Stamps (canceled or uncanceled)
– Immigration Papers
– Identifying Badges or Insignias
– Internal Revenue Stamps (canceled or uncanceled)
– Selective Service or Draft Papers
– Bonds or Other Certificates of Indebtedness
– Checks or Drafts Issued by Governmental Agencies
– Stock Certificates
– Motor Vehicle Licenses and Certificates of Title
– Copyrighted Works/Works of Art without Permission of Copyright Owner
Considerable effort has been made to make sure that the manuals for 
the machine are free of inaccuracies and omissions. However, as we 
are constantly improving our products if you need an exact 
specification, please contact Canon.
 
						

							
58
 
						

							
59
A Tip for Saving Paper
The machine comes with useful features that can be combined to reduce the volume of 
paper used when copying.
Copying regularly
Copying with features combined

■Two-Sided Copying 
(See the Advanced Operation Guide.)

DEF
DEF
DEF
DEF

2

ABC
ABC
ABC
ABC
1

ABC
ABC
ABC
ABC
1

DEF
DEF
DEF

■Collate Copying
(See the Advanced Operation Guide.)

DDDD
DDDD
DDDD
DDDD
4
CCCC
CCCC
CCCC
CCCC
3
BBBB
BBBB
BBBB
BBBB
2

AAAA
AAAA
AAAA
AAAA
1
AAAA
AAAA
AAAA
AAAA
1
AAAA
AAAA
AAAA
AAAA
1
AAAA
AAAA
AAAA
AAAA
1

AAAA
AAAA
AAAA
AAAA
1

■ 2 on 1 Combination
(See the Advanced Operation Guide.)

DEF
DEF
DEF
DEF

2

ABC
ABC
ABC
ABC
1

ABC
ABC
ABC
ABC
1

DEF
DEF
DEF
ABC
ABC
ABC
ABC
1

DEF
DEF
DEF
DEF

2