Canon Ir1020j Quick Start Guide
Here you can view all the pages of manual Canon Ir1020j Quick Start Guide. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 1
Quick Start Guide Please read this guide before operating this product. After you finish reading this guide, store it in a safe place for future reference. Quick Start Guide Printed on non-chlorine bleached paper. Gedruckt auf chlorfrei gebleichtem Papier. CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A., INC. One Canon Plaza, Lake Success, NY 11042, U.S.A. CANON CANADA INC. 6390 Dixie Road Mississauga, Ontario L5T 1P7, Canada CANON EUROPA N.V. Bovenkerkerweg 59-61 1185...
Page 2
Set Up the Machine Unless otherwise mentioned, illustrations used in this manual are those taken when no optional equipment is attached to the iR1024iF, and also the menus described in this manual are based on the iR1024iF. Do You Have Everything? Before Setting Up the Machine ●Remove all shipping tape on the machine. ● When moving the machine, be sure at least two people carry it using the provided hand grips on the left and right sides, as seen in the illustration right. ● The shapes of your...
Page 3
Depending on the model of your machine, some settings may not be available and the number on the top of each menu may vary. Manuals for the Machine ●Quick Start Guide (This Document): Machine set-up and software installation ● Basic Operation Guide: (in User Software CD)*: Basic features, maintenance, machine settings, and specifications ● Advanced Operation Guide (in User Software CD)*: Advanced features, network and remote user interface, system monitor, and reports and lists ● Scanner Driver Guide...
Page 4
3 Install the Toner Cartridge 1 Remove the plastic case from the box. 2 Open the case and remove the toner cartridge. Keep the box and case for future use. 4 Pull the toner cartridge lever (A) towards you and insert the cartridge into the machine with the arrow (B) pointing towards the machine. 5 Holding the cartridge steady with one hand, pull out the seal completely with the other hand. NOTE Do not pull out the seal at an angle. 8 Close the front cover. CAUTION – Be careful not to get your...
Page 5
CAUTION – Do not touch the portions (A) and (B). – Do not pull out the seal (C) before inserting the cartridge into the machine as the toner may spill out. 3 Open the front cover. 6 Turn the cartridge lever (A) as far as it will go counterclockwise. 7 Push down the lever. A C B A 4
Page 6
5 Install the Drum Unit 1 Open the left cover. 2 Open the package of the new drum unit and remove the protective packing material (A). 5 After the unit is completely inserted, remove the orange paper. 6 Close the left cover. CAUTION Be careful not to get your fingers caught. A
Page 7
3 Hold the unit by its grips on both sides. 4 Align the marks on both sides of the drum unit (B) with the marks on the machine (A), and push the unit into the machine as far as it will go. CAUTION Do not touch the portion (A) as the image quality of printouts may deteriorate. BB A A A 6
Page 8
7 Load Paper 1 Pull out the paper drawer until it stops. 2 Even the edges of the paper stack. Connect the Telephone Cables (iR1024F/iR1024iF Only) Connect the supplied telephone cable to the line jack (A) and the wall jack. Connect your external telephone to the external device jack (B) if required. Users in UK: If required, use a separately available B.T. adaptor to connect an external device. B A
Page 9
3 Load the paper stack print side up. NOTE Make sure the back edge of the paper stack touches the rear paper end guide (C), the paper stack should not exceed the load limit mark (A), and the load is under the small fins (B) on the paper guides. 4 Gently insert the paper drawer as far as it will go. CAUTION Be careful not to get your fingers caught. NOTE For loading paper in the stack bypass, see Chapter 3, “Print Media,” in the Basic Operation Guide. AB B C 8
Page 10
9 Connect the Power Cord, Turn On the Machine, 12 Connect the supplied power cord into the rear socket and the wall outlet and press the [I] side of the main power switch to ON.If appears, press [] or [ ] to select a language for the LCD, then press [OK]. What if... ● is displayed: Make sure that the front or left cover is closed properly. (See “Install the Toner Cartridge,” on p. 3, or “Install the Drum Unit,” on p. 5.) ● is displayed: Make sure that the toner cartridge is installed properly....