Canon Ir Advance 6065 User Guide

Volume and Voice Speed Settings4-15
4
Customizing Settings
Volume and Voice Speed Settings
You can set the volume and speed of Voice 
Navigation messages.
NOTE
•The default settings for the voice volume 
and speed are 0 (Standard).
•Voice guide is available for this setting.
 

Customizing Settings
1
4
Volume and Voice Speed Settings
4-16
1Press  (Settings/Registration)   
move the focus to [Voice Navigation 
Settings]   press   (Select).
If necessary, see the screen shot in step 
1 of Setting the Auto Reset Mode, on p. 
4-8.
The voice guide announces that the 
Voice Navigation settings screen is 
displayed.
2Press   (Back) or   (Next) to 
move the focus to [Voice Guide 
Volume/Speed]   press   (Select).
 

1
Volume and Voice Speed Settings4-17
4
Customizing Settings
The voice guide announces that the 
Voice Guide Volume and Speed screen 
is displayed.
3Press  (Select)  press   (Back) 
to move the indicator to the left to 
decrease the volume. Press    (Next) to move the indicator to the 
right to increase the volume   press 
 (Select).
 

Customizing Settings
1
4
Volume and Voice Speed Settings
4-18 There are nine volume levels. As the 
indicator moves to the left, the volume 
decreases from -1 to -4. Minus 1 is 
slightly lower than the standard volume 
setting, and -4 is the lowest setting. As 
the indicator moves to the right, the 
volume increases from +1 to +4.
Example:
If the indicator is in the middle (the 
Standard setting), and you press 
 (Next), the indicator moves to the 
right. The voice guide will say, Plus 1.
You can also...

1
Volume and Voice Speed Settings4-19
4
Customizing Settings
4To set the voice guide’s reading 
speed: 
❑ Press   (Next) to move the focus to 
the Speed indicator   press 
 (Select)     (Back) or 
 (Next) to adjust the voice guide ’s 
speed   press   (Select).
There are 11 speed levels (from -5 to 
+5). As the indicator moves to the 
left, the speed decreases. As the 
indicator moves to the right, the 
speed increases.
 

Customizing Settings
1
4
Volume and Voice Speed Settings
4-20 ❑
Press  (Con firm).
The voice guide announces that the 
Voice Guide Volume and Speed 
screen is displayed.
5Press  (Con firm) until the display 
returns to the Basic Features screen.
IMPORTANTIMPORTANT
The speed/sound setting is only enabled 
after you press   (Con firm).
 

Enabling/Disabling the Voice Guide fromSpeaker4-21
4
Customizing Settings
Enabling/Disabling the Voice Guide from 
Speaker
You can set whether to output Voice 
Navigation messages from the speaker.
NOTE
•The default setting is On.
•If you select [OFF], listen to the Voice 
Navigation messages using headphones 
or earphones.
1Press  (Settings/Registration) 
 
move the focus to [Voice Navigation 
Settings]   press   (Select).
If necessary, see the screen shot in step 
1 of Setting the Auto Reset Mode, on...

Customizing Settings
1
4
Enabling/Disabling the Voice Guide from 
Speaker
4-22
2Press   (Back) or   (Next) to 
move the focus to [Voice Guide From 
Speakers] 
 press   (Select).
The voice guide announces that the 
Voice Guide From Speakers settings 
screen is displayed.
 

1
Enabling/Disabling the Voice Guide fromSpeaker4-23
4
Customizing Settings
3Press   (Back) or   (Next) to 
move the focus to [On] or [Off] 
 
press  (Select).
4Press  (Con firm) until the display 
returns to the Basic Features screen.
 

Customizing Settings
1
4
Enabling/Disabling the Voice Guide from 
Speaker
4-24