Canon Imageprograf Ipf8300 User Guide

Paper Information on Printer Dialog Box
On the  Paper Information on Printer  dialog box, you can obtain information on the paper in the printer and configure
printer driver settings for the paper source and media type.Note• To  display  the  Paper  Information  on  Printer   dialog  box,  on  the Main  sheet,  click  Get  Information  by
Media Type .(See "Main Sheet 
→P.209 ")
APaper Source
Shows the paper source supported by the printer, as well as information about the loaded paper. To update...

Note•To  display  the  Paper  Detailed  Settings   dialog  box,  on  the Main  sheet,  click  Settings  by Media  Type .(See
" Main Sheet 
→P.209 ")
ADrying Time
Specify the time that the printer waits for ink to dry, as needed. The  Drying Time setting is only valid for rolls.
• (See " Specifying the Ink Drying Time for Rolls
→P.792 ")
BBetween Pages
Specify the time the printer waits after printing a page until ejecting the paper, as needed.
C Between Scans
Specify the time the printer...

View Settings Dialog Box for the Printing ApplicationIn the  View Settings  dialog box, you can check details of the selected printing application.Note•To  display  the  View  Settings  dialog  box,  on  the  Main  sheet,  click  View  Settings   by Print  Target .(See
" Main Sheet 
→P.209 ")
APrint Target
Shows all  Print Target  options (settings items for the printing application).
BName
Identifies the item selected in  Print Target by its name and an icon.
CDetails
Here, you can confirm...

Note•To  display  the  Color  Adjustment   sheet,  on  the Main  sheet,  click  Color  Settings   by Color  Mode   in Ad-
vanced Settings .(See "Main Sheet 
→P.209 ")
ASample Type
Choose a sample image from  Standard, Portrait , Landscape , or Graphics .
BView Color Pattern
Select this checkbox to display the color pattern.
C Apply to Sample
Select this checkbox to apply the changed settings to the sample image.
D Cyan  / EMagenta  / FYellow
Fine-tune color tones by adjusting the levels of each...

JSaturation
Adjust the color intensity as desired. Increasing the  Saturation setting makes colors more vivid, and reducing the  Satura-
tion  makes colors more subdued.
KObject Adjustment
Select this option to display the  Object Adjustment dialog box, in which you can specify objects subject to color adjust-
ment.
•Object Adjustment dialog box: Color
→P.217
S Defaults
Click to restore all settings on the sheet to the default values.
Note• For details on settings items, see " Adjusting the Color in...

Matching Sheet
On the  Matching  sheet, you can specify color matching to compensate for differences in the appearance of colors on vari-
ous devices.Note• To  display  the  Matching  sheet,  on  the  Main  sheet,  click  Color  Settings   in Color  Mode   in Advanced  Set-
tings , and then click the  Matching sheet. (Refer to " Main Sheet 
→P.209")
Important•If  No color correction  is selected under Color Mode, the Matching  sheet is not displayed.
Driver Matching Mode
The following options are...

DMonitor White Point
Enter the color temperature set on the monitor.
Displayed when the  BMatching Method  is set to Monitor Matching .
EUse ambient light adjustment
Select this option for adjustment of colors to suit the ambient light in the viewing environment.
F Ambient Light Adjust
Click to display the  Ambient Light Adjust  dialog box, which enables you to complete settings for printing to match the
ambient light.
•Ambient Light Adjust dialog box
→P.220
ICC Matching Mode , Driver ICM Mode  and Host...

CPrinter Profile Settings
Specify the printer profile as desired. Normally, select  Auto Settings.Note•For details on settings items, see " Adjusting the Color in the Printer Driver→P.42"
Ambient Light Adjust dialog box
The  Ambient Light Adjust  dialog box is used to select the setting method and to enter and select the information required
for the settings.
When you select  By selecting a chart number  in Setting Method
ASetting Method
You can choose configuration based on the printed  Chart or...

When you select By entering values directly  in Setting Method
ASetting Method
You can choose configuration based on the printed  Chart or based on using the i1 colorimeter.
BLighting Source Type
Select the light source measured using the i1 colorimeter.
D Color Temperature
Enter the  Color Temperature  measured using the i1 colorimeter.
EIlluminance
Enter the  Illuminance  measured using the i1 colorimeter.
Displayed when the  AMatching Method  is set to Monitor Matching  on the Matching  sheet....

Light Source Check Tool
The  Light Source Check Tool  enables you to print Chart.
APrinter Name
The printer name is displayed here.
B Media Type
Select the paper type. For information on the types of paper compatible with  Driver Matching Mode, refer to the Paper
Reference Guide.(See " Types of Paper
→P.768")
CPaper Source
Choose the paper source, as desired.
Options displayed in the list vary depending on the selection in  BMedia Type  in the Main sheet.
DPrint
Click to print the  Chart.
Windows...