Canon Imageprograf Ipf825 Mfp M40 User Guide

Matching
You can set the matching. Important
• If No color correction  is selected under Color Mode, the Matching  is not displayed.Matching Mode
You can select a matching mode to suit the print job. Setting
Details
Driver Matching
Mode →P.497
Enables printing of optimal color tones using a driver specific color profile. You
should normally select this mode.
ICC Matching Mode →P.498
Enables color matching using ICC profiles. Select this if you want to print by spec-
ifying the input profile, printer...

Matching Method
You can select a matching method to suit the print job. Input Profile
Select the input profile. Note
• You can select only after  ICC Matching Mode has been selected in  Matching Mode.Printer Profile
Select the printer profile. Note
• (Using Mac OS X 10.3.9 - 10.4)You can select only after  ICC Matching Mode or ColorSync has been se-
lected in  Matching Mode.
• (Using Mac OS X 10.5 or later)You can select only after  ICC Matching Mode has been selected in Match-
ing Mode. Soft Proof
When...

Driver Matching Mode
1. Under Matching Mode, select  Driver Matching Mode.2.
Click Matching Method list, and then select a setting. Setting
Details
Auto Automatically selects the best color matching method for each Image, Graphics,
Text.
Perceptual Color-matching optimized for printing typical photos attractively. Smooth grada-
tion is a feature. This is also an easy-to-use mode when performing color adjust-
ment using application software.
Saturation Color-matching optimized for printing posters, etc.,...

ICC Matching Mode
1. Under Matching Mode, select  ICC Matching Mode.2.
Click the  Matching Method list, and then select a setting. Setting
Details
Perceptual Color-matching optimized for printing typical photos attractively. Smooth grada-
tion is a feature. This is also an easy-to-use mode when performing color adjust-
ment using application software.
Saturation Color-matching optimized for printing posters, etc., vividly.
Colorimetric Color-matching optimized for printing image data with accurate colors...

ColorSync
1. Check that  ColorSync is selected in  Matching Mode.2.
Place a checkmark on  Soft Proof to simulate the output product in Layout Area. Mac OS X Software > Free Layout >
iPF815
ColorSync 5
499
 

Preferences Dialog Box
This dialog box appears when you select  Preferences from the imagePROGRAF Advanced Preview menu. You can set the
preferences for Free Layout. Units
Set the unit for paper length, margins, and so on.
Gridlines
You can input a grid line width value in numerical characters so that they serve as a guide to laying out objects. Note
• You can input between 10.0 and 200.0(mm) (between 0.39 and 7.87(inch)).
• You can change the numbers by clicking either  ▲ button or ▼ button. Divisions...

Note
• If you do not want to print the object border, deselect the  Print Object Frames check box.Object Frame Style
You can select the object frame style for printing.
The following settings are available for the object frame style. Setting
Details
Solid Line You can print the solid line as the frame style.
Dotted Line You can print the dotted line as the frame style.
Dashed Line You can print the dashed line as the frame style.Auto Arrange Spacing
Change the object-to-object spacing to be applied in...

Setting
Details
Vertical Prints the image and text created with the application software in the orientation as
it is.
Horizontal Prints the image and text by rotating sideways 90 degrees from the orientation as
specified in the application. Roll Paper Length
Set the length of one page to print on roll paper.
When you place a checkmark on  Auto Settings, the one-page length to be printed on roll paper is automatically set so that
the laid-out objects are printed on one page. Note
• Available only if rolls...

Scaling
Set the magnification for enlargement or reduction of the screen display. Note
• You can input between 10 and 400.
• You can change the numbers by clicking  ▼ button.Format Dialog Box
This dialog box appears when you select 
Format from the Object menu after you select an object. You can rotate, enlarge,
or reduce an object. Note
• When the objects are not selected, you can not select  Format. Rotate
When you place a checkmark here, you can select  Rotate Right or Rotate Left.Setting
Details...

Object Size
You can confirm the object size. Note
• When several objects are selected, you cannot display  Object Size. Laying out a Multiple-File Document on One Page
You can lay out and print a multiple-file document on one page.
1. From the application software's  File menu, select the printer setup menu to open the  Print dialog box. Note
• Normally, select  Print from the File menu.
2. Click on  Free Layout in the  Page Setup panel to attach a checkmark.
3. In the  Print dialog box, select the...