Canon Imageprograf Ipf815 User Guide

7.
Press the ▲ or ▼  button to enter the value. Note
• Pressing the  ▲  button  increases  the  number  by  1.  The  maximum  value  is  255,  after  which  0  is  dis-
played.
• Pressing  the  ▼  button  decreases  the  number  by  1.  The  minimum  value  is  0,  after  which  255  is  dis-
played.
• Hold down ▲ or ▼ to increase or decrease the value continuously.
8. Repeat steps 6–7 to enter the IP address assigned to the printer.
9. Press the Online button to bring the printer online.
If any settings...

2.
In Windows, open a command prompt, or in Mac OS X, start Terminal.
3. Execute 
the following command to add entries to the ARP table for managing IP addresses and corresponding MAC
addresses.
arp -s [IP address] [the printer's MAC address you have verified]
Example: arp -s xxx.xxx.xxx.xxx 00-00-85-xx-xx-xx Note
• In 
Mac  OS  X  when  using  Terminal,  enter  the  arp  command  in  the  format  arp  -s  xxx.xxx.xxx.xxx
00:00:85:xx:xx:xx. For details, refer to the help file for the command line.
4....

Important
• Use Netscape Navigator 6.0 or later, Internet Explorer 5.01 or later, or Firefox 1.5 or later as a web browser.
In Mac OS X, you can also use Safari 1.32 or later or Safari 2.03 or later.
• Access is not possible via a proxy server. In environments where a proxy server is used, add the printer's IP
address to  Exceptions (addresses accessed without a proxy server) in the web browser proxy server settings.
(Settings may vary depending on the network environment.)
• Enable JavaScript and...

Item
DetailsDefault Setting
IPP Printer URI When using a standard Windows port for IPP printing, enter an
URL less than 255 bytes for all characters for  http://"IP ad-
dress"/IPP-URI. printer
RAW Printing Activate this setting to use Raw Printing. On
RAW Mode Bi-di-
rection Activate this setting to use Raw mode bidirectional communica-
tion. Off
FTP Printing Activate this setting to use FTP Printing. On
SMTP Server Ad-
dress Specify the SMTP server's IP address.
0.0.0.0
Primary DNS Serv-
er...

3.
If a password has been set on the printer, enter the password.
4. Click Information in the  Device Manager menu at left to display the  Information page.
5. To 
display  the  relevant  settings  page,  click  Edit  in  the  upper-right  corner  of Device  Information  or Security,  de-
pending on what information you want to specify.
6. Refer to the table of settings for device information and security as you complete these settings.
Device Information Settings Item
DetailsDefault Setting
Device Name...

Configuring the Communication Mode Manually
This topic gives instructions for configuring the communication mode manually.
1. Press the Menu button to display  MAIN MENU.2.
Press ▲ or ▼  to select Interface  Setup, and then press the  ▶ button.
3. Press  ▲ or ▼ to select  Ethernet Driver, and then press the  ▶ button.
4. Press ▲ or ▼  to select Auto Detect, and then press the  ▶ button.
5. Press  ▲ or ▼ to select  Off, and then press the  OK button.
Return to the  Ethernet Driver menu.
6. Press  ▲ or ▼...

12.
Press the Online  button.
After the confirmation message is displayed, press  OK.
The new settings will take effect after the printer restarts. Email Notification When Printing is Finished or Errors Occur
The printer can notify you of the printer status by email. Even when you are away from the printer, you can know when
printing is finished or if errors occur. Receive notification via email on your mobile phone or at your computer. Use the imagePROGRAF Status Monitor (Windows) function to set up...

1.
Start the  web  browser  and  enter  the  following  URL  in  the  Location  (or Address   )  box  to  display  the  RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2. Select  Administrator Mode and click  Logon.
3. If a password has been set on the printer, enter the password.
4. Click  Network  in the Device Manager  menu at left to display the  Network page.
5. Click  Reset to Default settings  in the lower-right corner of the  Network Interface group.
6. After...

Network Setting (Windows)
Configuring the Printer Driver Destination  ...................................................................................................... 783
 
Configuring the Printer's NetWare Network Settings ...................................................................................... 784
Specifying the Printer's Frame Type ............................................................................................................... 785
Specifying NetWare Print...

Configuring the Printer's NetWare Network Settings
Follow the steps below to configure the  NetWare network settings.
1. Start  the  web  browser  and  enter  the  following  URL  in  the  Location  (or Address  )  box  to  display  the  RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2. Select Administrator Mode  and click Logon.
3. If a password has been set on the printer, enter the password.
4. Click Network in the  Device Manager menu at left to display the...