Canon Imageprograf Ipf815 Mfp M40 User Guide

At this point, ink is drawn out from inside the tubes.
Important
• Do not remove the Maintenance Cartridge during this process.
When the process is finished, " Finished preparing to move printer. Turn off printer. " is displayed.
13. Press the Power  button and turn off the printer. Important
• Turn off  the  printer  before  you  unplug  it.  It  may  damage  the  printer  if  you  unplug  it  before  it  is  off
and  transfer  it  in  that  state.  If  you  accidentally  unplug  the  printer,...

17.
Grasp  the Belt, insert it between the Belt Stopper, and affix the Belt Stopper with a hex screw at the position indica-
ted. Important
• Here, 
the  Belt  Stopper  is  the  one  that  was  removed  and  stored  after  initial  installation.  Neglecting  to
attach the Belt Stopper may damage the printer.
• Do not touch the Linear Scale (a), Carriage Shaft (b), or Ink Tube Stabilizer (c). Touching these parts
may damage them. Maintenance 
> Other Maintenance >
Preparing to Transfer the Printer...

18.
Close the Top Cover. 19.
Tape down printer covers to secure them, in the reverse order of tape removal during installation.
20. If 
the  Stationary  Output  Stacker  is  installed,  reverse  the  installation  procedure  to  remove  the  Stationary  Output
Stacker.
21. Remove the Stand by reversing the installation procedure, when it was attached to the printer.
22. Disassemble and repackage the Stand by following the installation procedure in reverse.
23. Repack the Roll Holder, Holder Stopper, and...

Updating the Firmware
To obtain the latest firmware, visit the Canon website. If the firmware available online is newer than the installed firmware,
update the printer firmware. For details on downloading and updating the firmware, visit the Canon website.
Maintenance > Other Maintenance >
Updating the Firmware
iPF81511
848
 

Troubleshooting
Frequently Asked Questions
850Problems Regarding Paper
852Printing does not start
863The printer stops during a print job
865Problems with the printing quality
866Cannot print over a network
878Installation problems
880HP-GL/2 problems
882Other problems
884 Troubleshooting >
iPF815 12
849
 

Frequently Asked Questions
Frequently Asked Questions ........................................................................................................................... 850Frequently Asked Questions
This section presents frequently asked questions and answers. To view more detailed explanations, click the hyperlinks in
the answer column. Question
Answer
How do I print on a
roll? When printing on rolls, after loading the roll, specify the paper type and length, both on the
Control Panel and in...

Question
Answer
How do I print without
wasting all the blank
space on the right side
when printing an A4-
sized original at A3
size? By specifying to rotate originals 90 degrees in the printer driver, you can print at A4 size to
fill the width of A3 paper.
⇒"Conserving Roll Paper by Rotating Originals 90 Degrees →P.167
"
How do I print in land-
scape (or portrait) ori-
entation? You can print originals that are in landscape (or portrait) orientation automatically enlarged
to fit the roll width....

Problems Regarding Paper
Clearing Jammed Roll Paper .......................................................................................................................... 852
Clearing a Jammed Sheet ............................................................................................................................... 856
 
Troubleshooting When Paper Jams are not Found
......................................................................................... 858
 
Roll paper cannot be inserted...

Important
• Do not touch the Linear Scale (a), Carriage Shaft (b), or Ink Tube Stabilizer (c). Touching these parts
may damage them. 4.
If the Cutter is out, move the Cutter to the right side, away from the paper. Important
• If 
the  Cutter  is  on  the  left  side,  be  sure  to  move  it  to  the  right.  If  the  Cutter  is  on  the  left  side  when
you turn the printer on, the printer may rip the paper. Troubleshooting 
> Problems Regarding Paper >
iPF815
Clearing Jammed Roll Paper 12
853
 

5.
Lift the Release Lever. 6.
Holding  the  paper  on  both  sides,  pull  the  jammed  portion  out  toward  the  front.  Use  a  scissors  or  cutting  tool  to  cut
away the printed or wrinkled portion. Caution
• When cutting paper, be careful to avoid injury and damaging the printer.
Troubleshooting 
> Problems Regarding Paper >
Clearing Jammed Roll Paper
iPF81512
854