Canon Imageprograf Ipf815 Mfp M40 User Guide

12.
Make sure the width of the loaded roll is displayed in the  BRoll Width list—in this case,  ISO A2/A3 (420.0mm). Note
• If the width of the roll loaded in the printer is not shown in  BRoll Width , click LPrinter Informa-
tion on the  Main pane to update the printer information. 13.
Make 
 sure  the CPage  Size   setting  matches  the  original  size  as  selected  in  CPaper  Size   in  the Page  Attributes
dialog box—in this case,  ISO A4.14.
Confirm the print settings, and then click  MPrint to...

Using Favorites
You can register print settings as  Favorites to reuse settings from a particular job that met your expectations, or settings for
a particular page size that you will use repeatedly. Favorites
Registering a favorite for later use. You can choose the settings you have registered from a list before printing, and you can
check the settings details. Note
• You can also save the favorite settings as files. Using these files is a convenient way to print under the same
conditions on another...

3.
Click the  Page Setup tab to display the  Page Setup sheet.4.
Select and click a roll paper in the  LPaper Source  list.
5. Click  NRoll Paper Options to display the  Roll Paper Options dialog box.6.
To enable automatic cutting, click  Yes in the AAutomatic Cutting  list. If you prefer to cut the paper later yourself,
click Print Cut Guideline .
7. Click  OK to close the  Roll Paper Options dialog box.
8. Confirm the print settings and print as desired. Note
• For tips on confirming print settings,...

Cutting Roll Paper After Printing (Mac OS X)
This topic describes how to cut roll paper automatically after printing (using the auto cut function), as well as how to print a
cut line for manual cutting. Note
• The auto cut function is activated on the printer by default and when the printer driver is installed. Follow the
steps below to reactivate the function if it is disabled, or to select the setting for printing a cut line instead.
 
1. This sets the  BFormat for  and CPaper Size. Note
• The...

5.
Access the Page Setup pane. 6.
Select and click a roll paper in the  APaper Source list.
7. Access the Main pane. 8.
In the  AMedia Type list, select the type of paper that is loaded. Enhanced Printing Options > Other useful settings >
iPF815
Cutting Roll Paper After Printing (Mac OS X) 3
199
 

9.
Click  CSet to display the  Paper Detailed Settings  dialog box.10.
To enable  automatic  cutting,  click  Printer  Default  in  the HAutomatic  Cutting  list.  If  you  prefer  to  cut  the  paper
later yourself, click  Print Cut Guideline. Important
• If 
the  automatic  cut  function  has  been  deactivated  on  the  printer,  change  the  auto  cut  setting  on  the
printer Control Panel.
11. Click OK to close the  Paper Detailed Settings dialog box.
12. Confirm the print settings, and then click...

Windows Software
Printer Driver
202Preview
243Free Layout
256Color imageRUNNER Enlargement Copy
286Print Plug-In for Office
301HDI Driver
354Status Monitor
387Accounting
390Digital Photo Front-Access
402Device Setup Utility
403Media Configuration Tool
406 Windows Software >
iPF815 4
201
 

Printer Driver
Printer Driver Settings  .................................................................................................................................... 202
 
Specifying Paper in the Printer Driver  ............................................................................................................ 204
Confirming Print Settings 
................................................................................................................................ 206
Checking the...

For information on the Windows printer driver settings, refer to the following topics.
•
Main Sheet  →P.215
You 
can specify the type of paper, color processing, print quality, print preview, and other settings. Choose  Easy Set-
tings to specify basic print settings based on the printing application or  Advanced Settings to complete more detailed
settings as desired.
•Paper Detailed Settings Dialog Box  →P.219
• View Settings Dialog Box for the Printing Application  →P.221
• Color Adjustment Sheet:...

•
Device Settings Sheet  →P.242
You 
can display settings for optional equipment installed on the printer and see the version information for the printer
driver.
imagePROGRAF Free Layout  is a feature for freely arranging originals from various source applications on a single page
as desired before printing. For details, see  Free Layout →P.256
.
Color imageRUNNER Enlargement Copy is a feature for automatic enlargement and printing of scanned originals from a
Color imageRUNNER. For details, see Color...