Canon Imageformula Dr C130 User Guide

Setup Guide
Guide de configuration
Guía de instalación
EN
FR
ES
0-00-DR-C130_SG_E3.book  Page 1  Friday, March 16, 2012  9:31 AM
 

1
DR-C130 Setup Guide
Please read first.
Checking the Accessories
DR-C130
Setup Guide
(this document)
Warranty 
Card
(U.S.A and Canada only) Feed Roller
(Attach this roller to the  scanners main unit.) USB Cable
Type A/Type B 
(Length: 1.8 m) AC Adapter/Power Cord
(Connected length: 2.6 m)
Setup Disc
(DVD-ROM)
• Items included in this manual are  subject to change without notice.
• You must keep the machines packaging and packing ma terials for storing or transporting the machine.
• The shape of the...

2
1
Slide the document guides to the 
left and right, and open the roller 
cover.
2
Fit the feed roller in the unit by 
aligning the notch on the roller 
with the shaft on the unit.
3
Close the roller cover. It is 
properly closed when you hear a 
click.
4
Gently press on the sides of the 
front unit to close it. It is properly 
closed when you hear a click.
STEP 
2
Installing the Feed Roller
document  guides
roller cover
DR-C130_SG.fm  Page 2  Fr iday, March 16, 2012  8:54 AM
 

3
Install the following software necessary for using the scanner from
the supplied Setup Disc (DVD-ROM).
• CaptureOnTouch This is a dedicated scanning utility for this product.
• CapturePerfect 3.1
This is a scanning applicati on for the DR series scanner.
• Scanner Driver This is the scanner driver for this product.
• User Manual The supplied Setup Disc contains  a manual that explains the 
overall operation on the scanner. You can open the manual from 
[Canon DR-C130] in the Windows Start menu, after...

4
System requirementsThe following system requirements are recommended for optimal use
of this scanner.•Computer• CPU:Intel Core 2 Duo 1.66 GHz or faster
• Memory:1 GB or more
• Hard disk:3 GB or more available space required for installation
of all software
• USB interface:Hi-Speed USB 2.0
• Monitor:Resolution of 1024 x 768 (XGA) or better recommended.
• Optical drive:Drive capable of reading DVDs.• Operating system• Microsoft Windows XP Service Pack 3 or later
• Microsoft Windows XP x64 Edition Service...

5
1
Insert the Setup Disc into the disk 
drive of the computer.
2
Click [Typical Installation].
3
Click [Install].
4
Follow the instructions on the screen 
to complete installation.
5
Click [Exit] to finish installing.
Installing the Software
CAUTION
• Do not connect the scanner to the computer before installing the software.
• If you connect the scanner and turn it ON before you install the software, the following  wizard screen will appear. If this wizard is di splayed, click the [Cancel] button to...

6
Connecting to a Computer
CAUTION• Be sure to use the supplied power cord and AC adapter. 
• Turn off the scanners power when connecting the scanner to 
the computer.
Use the supplied USB cable to connect the scanner to the PC.
Turning the Scanner ON
Power Button
The power indicator lights blue when the power is ON. Power Indicator
When the connection is done, press the power button to turn on the scanners power.
DR-C130_SG.fm  Page 6  Fr
iday, March 16, 2012  8:54 AM
 

7
Use CaptureOnTouch to verify that you can perform the scanning operation.1
Open the feed tray gently.
2
Push the feed selection lever up 
(Normal mode).
3
Load the scan document with its 
backside facing forward, and 
adjust the paper guides to the 
width of document.
4
Press the scanners Start button.
5
The scan result is displayed on 
the CaptureOnTouch screen.
6
Click [Next] and specify how to 
save the scan results.
For details on the operation of 
CaptureOnTouch, see the User  
Manual.
Scanning...

8
Installation LocationThe performance of this scanner is affected by the environment in
which it is installed. Make sure  that the location where the scanner is
installed meets the following environmental requirements.
• Provide adequate space around the scanner for operation,  maintenance, and ventilation.
• Provide adequate space in front of the scanner for documents 
output after being scanned.
• Avoid installing the machine in direct sunlight. If this is  unavoidable, use curtains to shade the...

9
Moving the Scanner• When moving the scanner, always hold it with both hands to avoid dropping it. The scanner wei ghs approximately 1.8 kg (3.97 
lb).
• Make sure to disconnect the interface cable and AC adapter 
before moving the scanner. If the scanner is transported with 
these items connected, the plugs and connectors may be 
damaged.Handling
Warning
Note the following precautions  whenever using the scanner. Failure
to do so may result in a fire or electric shock. • Never use alcohol, benzene,...