Home > Canon > Printer > Canon Imageformula Dr 2020u User Guide

Canon Imageformula Dr 2020u User Guide

Here you can view all the pages of manual Canon Imageformula Dr 2020u User Guide. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 21

21
 Do not wear loose clothing or jewelry that may get caught in the scanner while you are using it. Doing so may result in personal 
injury. Be extra careful of neckties and long hair. If anything 
becomes caught in the scanner, immediately disconnect the power 
plug from the power outlet to stop the scanner.
 Documents with curled edges may result in folds and paper jams. 
Make sure to straighten out the curls before loading documents in 
the scanner.
 Handle paper edges with care, and be careful not...

Page 22

22
Placing Documents into the Feeder
1Fan the pages of the document to be scanned, and load 
the document into the feeder with the scanning side 
facing up.
2Adjust the document guides to the edges of the 
document.
IMPORTANT
 Close the business card feeder. The documents placed into the  feeder cannot be scanned if the business card feeder is open.
 Scanning curled or creased documents may result in damage to the  documents.
 Even if a document does not ex ceed the document feed tray’s 
capacity  (see...

Page 23

23
Placing Documents on the Flatbed
1Place the document on the flatbed with the scanning side 
facing down, and align the upper left corner of the 
document with the positioning guide on the flatbed.
IMPORTANT
 Do not place objects other than the document to be scanned onto  the flatbed platen glass. Doing so may result in damage or personal 
injury.
 Open and close the feeder gently. Excessive force may result in 
damage to the feeder or breaking the scanning glass and personal 
injury.
When the...

Page 24

24
Placing Cards into the Business Card Feeder
1Open the business card feeder.
2Hold down the lever (A) on the side of the business card 
feeder, and place the cards into the feeder with the 
scanning side facing up. Fully insert the cards until they 
reach the stoppers ( B) at the back of the feeder.
3Close the business card feeder when scanning is 
finished.
IMPORTANT
 When the business card feeder is open, only the Business Card and  Auto-detection options are available for the paper type...

Page 25

25
Scanning
Supplied Software
The following software is supplied with the scanner, and can be installed from the supplied Setup disc.
 ISIS/TWAIN DriverThe ISIS/TWAIN driver is used for this  scanner. Open the driver to configure the  scanning conditions if you are performing scan ning operations. 
(See p. 48.)
IMPORTANT
Operation of the ISIS/TWAIN driver is not  guaranteed with all application programs.
Hint
You must install the software from the Setup disc to use  the scanner. For details on...

Page 26

26
Scanning with CaptureOnTouch
This section describes the DR-2020U’s scanning application, 
CaptureOnTouch.
CaptureOnTouch Features
Using CaptureOnTouch allows you to scan using easy-to-follow on-
screen instructions. In addition, by assigning scan functions to the 
buttons on the DR-2020U scanner’s operation panel, you can perform 
scanning procedures without your computer.
The following describes the output procedures for the two screens 
found in CaptureOnTouch.
Scan First
Select an output method...

Page 27

27
Select Scan Job
Register the scanning conditions and output methods as jobs, and 
then select a job that matches your intended purpose to begin 
scanning. You can also select registered jobs using the buttons on the operation 
panel.
 Three preset jobs are assigned to 
the job buttons, and the respective 
scanning procedures will be proces sed automatically when these 
buttons are pressed.
 Registered jobs can be assigned to the user defined job buttons.  When you press a user defined job button and...

Page 28

28
Outputs Methods
There are four methods available for processing scanned images.
* [Attach to E-mail] in [Scan First], and [Send by E-mail] in [Select Scan Job].
Starting CaptureOnTouch
CaptureOnTouch resides on your system when you log on to 
Windows, and a CaptureOnTouch icon appears on the taskbar 
(default).
When you double-click   (CaptureOnTouch), CaptureOnTouch 
starts and the main screen appears.
Hint
You can also start CaptureOnTouch from the Windows Start menu.
From the Windows taskbar,...

Page 29

29
Scanner Settings
Configure various scan settings, such as the scanning method and 
document size.
[Scan First] and [Select Scan Job] share the same scanner setting 
items.
IMPORTANT
Scanner settings include the basic settings found in the [Scanner 
setting] dialog box (or [Scanner setting] tab), and the advanced 
settings found in the driver settings screen. Setting configurations 
from the driver settings screen are used for all settings not found in 
the basic settings.
Basic Scanner Settings...

Page 30

30
●[Use advanced settings dialog box]
Scanner settings other than the basic  settings are configured on the 
driver settings screen. To open the dr iver settings screen, select the 
[Use advanced settings dialog box] check box and click [Open].
For details on setting items,  see “Configuring the ISIS/TWAIN 
Driver” on p. 48 , or refer to the Help on the driver settings screen.
IMPORTANT
The basic setting items found in the driver settings screen are the 
same as those in the [Scanner setting] dialog...
Start reading Canon Imageformula Dr 2020u User Guide

Related Manuals for Canon Imageformula Dr 2020u User Guide

All Canon manuals