Canon I Sensys Lbp6030w User Guide

0HWJ-03C
Clearing Paper Jams
If  paper  jams,   is  displayed in the  Printer Status Window.  Use  the  following  procedure to  remove  the  jammed
paper.  Before starting, carefully read  the  safety instructions in Important  Safety Instructions .
When  removing the jammed paper,  do not turn  OFF  the machine
Turning OFF  the  machine deletes the  data that  is  being printed.
If paper  tears
Remove all the  paper  fragments to  prevent  them from becoming  jammed.
If paper  jams  repeatedly
Tap the...

Check  whether paper  is  jammed inside the machine.
1Open  the top cover.
2Remove the toner  cartridge.
3Gently  pull  out  the paper.Hold  both  edges of the  paper,  pull the  leading  edge of the  paper  down, and  then  pull it out.
4Replace  the toner  cartridge.Align with the  toner cartridge  guide (
), and  push  firmly all the  way  in.
5Close  the top cover.
The paper  jam message disappears,  and  the  machine is  ready to  print.  
2
>Ý>à>Þ>Ì>Û>Ì>Þ>Ý>å
 

0HWJ-03E
When an Error Message Appears
An  error  message appears in the  Printer Status Window  when there is  a problem with print processing,  when the  machine cannot
communicate,  or when some  other problem prevents normal operation. See the  following  list  for  more information  about  error  messages.
Cannot  Communicate with Printer
Bidirectional  communication is  not  enabled.
Enable bidirectional communication,  and  restart the  computer. 
Checking Bidirectional  Communication
In a...

Check Printed Output
The job  may not  be printed normally.
can be clicked  to  continue printing.  If  you continue printing and  the  results are  not  satisfactory,  print the  job
again.
Check Printer
The toner  cartridge is  not  set.
Set the  toner cartridge  correctly. 
How to Replace  Toner  Cartridges
There is  paper from a paper jam left inside the machine. Thoroughly check  for  fragments of paper  that  may  be left  inside the  machine. If  you find any, remove  them. If  the
paper  is...

The machine is  connected  to an unsupported port.Check the  port. 
Checking the Printer Port
If the port you need is  not available
If  you are  using a network connection,  configure the  port. Configuring  Printer Ports
If  you are  using a USB  connection,  reinstall the  printer driver. Printer Driver  Installation  Guide
Insufficient Printer Memory
The document being printed contains a page with a very  large  amount of data.
This machine cannot  print the  data. Click 
 to  cancel the  print job....

Clearing Paper Jams
Service  Error
An error has occurred  inside the machine.Turn  OFF  the  machine, wait  for  at least  10 seconds,  and  turn  it back ON. If  the  message does not  reappear,  you can
continue using the  machine.
If  the  same message reappears  after you turn  the  power back ON, turn  the  power OFF, unplug the  power plug from
the  AC power outlet and  contact your local authorized  Canon  dealer.  Make  a note of the  error  code that  is  displayed,
and  have it ready when you...

0HWJ-03F
Common Problems
If  you encounter problems when using the  machine, check  the  items in this section  before contacting us. If  the  problems persist, contact
your local authorized  Canon  dealer or the  Canon  help line.
Is the machine turned ON ?  / Is the power cord  connected ?The 
(Power) indicator does not  light if  the  machine is  not  turned ON. If  the  machine does not  respond when you press the
power switch, check  to  make sure  that  the  power cord  is  connected correctly and...

0HWJ-03H
Installation/Settings Problems
Together with this section, see  Common  Problems.
Problems with the Wireless LAN Connection (LBP6030w)
Problems with the USB Connection
Problems via the Print Server
Remote  UI is  not  displayed.
The 
(Wi -Fi) indicator lights if  a connection has been established.  Check whether  it is  lit, and  whether  IP  addresses are
correct.  Then  try to  start the  Remote  UI again.  
Front  SideViewing Network Settings
Are  you using a proxy server ?  If  you are...

Reset  the wireless LAN settings
Connecting to a Wireless LAN
When  you need to manually  set up the connection
If  the  wireless router  is  set up  as described below, enter the  required information  manually.The stealth function is  enabled.
ANY connection refusal is  enabled.
The WEP key  number to  use is  set to  a number from 2  to  4.
The automatically generated  WEP key  (hexadecimal) is  selected.
A function in which the wireless  router refuses  the connection if the SSID  of the device  to...

0HWJ-03J
Printing Problems
Together with this section, see  Common  Problems. For problems related to  connection with the  computer, seeInstallation/Settings Problems .
Printing results  are not  satisfactory, or the paper is  curled or wrinkled.
When You Cannot Print Properly
You cannot print.
Can  you print a Windows  test page?  If  you can print a Windows  test page, there is  no  problem with the  machine or the  printer
driver. Check the  print settings of your application.  
Printing a Test  Page...